研究冷却塔噪声环境影响评价及污染防治措施

随着我国社会经济的发展速度不断加快,城市化建设层次越来越高,大量中央空调设备的冷却塔噪声影响到了人们的日常生活质量。基于此,本文重点针对冷却塔噪声环境的影响进行了分析和研究,提出了相关的有效防治策略,以此有效提高人们的生活质量和舒适度。     

水生态环境质量评价体系研究

流域水生态环境质量评价体系是为流域环境管理提供基础数据,协助管理者开展流域保护措施的重要技术支持。该文深入剖析了发达国家典型水生态环境质量评价体系,归纳分析了其体系框架、构成特点、方法适用性和借鉴意义。结合前期研究基础,对评价体系的技术内容进行了完善和补充,明确了参照点位的选择原则,补充了评价方法选择的技术路线,提出了增设和实施不同监测计划的方案,最终提出生态环境质量评价技术体系框架。     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

Effects of falling weight impact on industrial safety helmets used in conjunction with eye and face protection devices

Industrial workplaces pose concurrent hazards to the upper part of the head and the eyes. Under the circumstances, workers may use protective helmets in conjunction with protective goggles or spectacles. In order to assess the compatibility of this equipment, a method and a test stand for evaluating the behavior of safety helmets and protective goggles/spectacles upon the impact of a falling weight were designed. The results of tests concerning the displacement and deformation of helmets and spectacles/goggles, the forces acting on the helmets, as well as the forces exerted by the spectacles/goggles on the headform upon falling weight impact are presented. The results revealed the ways in which the tested equipment interacted with each other. The influence of equipment construction on the test results was analyzed and inferences concerning the safety of the studied protective devices were made. Some general construction guidelines were formulated for the compatibility of the equipment.     

“十三五”期间中国生态环境质量变化特征

以国家生态环境监测网监测结果为基础,总结归纳了"十三五"时期中国生态环境质量变化特征和主要环境问题。结果表明:"十三五"期间,全国生态环境质量全面好转,2020年环境空气优良天数比例比"十二五"末期上升5.8个百分点;地表水总体水质由轻度污染转为良好,Ⅰ～Ⅲ类水质断面比例上升17.4个百分点,劣V类断面比例下降9.0个百分点;酸雨污染程度减轻,海洋等环境要素质量稳中向好。但与此同时,后续改善难度加大,全国仍有40%地级及以上城市空气质量超标,4.8%的国土面积发生酸雨,辽河和海河流域仍是轻度污染,部分河流污染较重,地下水以IV类水质为主,农村饮用水源地和地表水水质均受到不同程度污染,近三分之一国土面积县域生态质量为较差和差。总体来看,当前生态环境质量与人民对美好生态环境的需求和美丽中国目标的实现还有较大差距。逐年上升的能源消费总量和不断增长的汽车保有量,增加了生态环境质量继续改善的压力。     

Assessing ecological function in the context of species recovery

Species interactions matter to conservation. Setting an ambitious recovery target for a species requires considering the size, density, and demographic structure of its populations such that they fulfill the interactions, roles, and functions of the species in the ecosystems in which they are embedded. A recently proposed framework for an International Union for Conservation of Nature Green List of Species formalizes this requirement by defining a fully recovered species in terms of representation, viability, and functionality. Defining and quantifying ecological function from the viewpoint of species recovery is challenging in concept and application, but also an opportunity to insert ecological theory into conservation practice. We propose 2 complementary approaches to assessing a species’ ecological functions: confirmation (listing interactions of the species, identifying ecological processes and other species involved in these interactions, and quantifying the extent to which the species contributes to the identified ecological process) and elimination (inferring functionality by ruling out symptoms of reduced functionality, analogous to the red-list approach that focuses on symptoms of reduced viability). Despite the challenges, incorporation of functionality into species recovery planning is possible in most cases and it is essential to a conservation vision that goes beyond preventing extinctions and aims to restore a species to levels beyond what is required for its viability. This vision focuses on conservation and recovery at the species level and sees species as embedded in ecosystems, influencing and being influenced by the processes in those ecosystems. Thus, it connects and integrates conservation at the species and ecosystem levels.     

Injury risk functions for frontal oblique collisions

Objective: The objective of this article was the construction of injury risk functions (IRFs) for front row occupants in oblique frontal crashes and a comparison to IRF of nonoblique frontal crashes from the same data set.

Method: Crashes of modern vehicles from GIDAS (German In-Depth Accident Study) were used as the basis for the construction of a logistic injury risk model. Static deformation, measured via displaced voxels on the postcrash vehicles, was used to calculate the energy dissipated in the crash. This measure of accident severity was termed objective equivalent speed (oEES) because it does not depend on the accident reconstruction and thus eliminates reconstruction biases like impact direction and vehicle model year. Imputation from property damage cases was used to describe underrepresented low-severity crashes―a known shortcoming of GIDAS. Binary logistic regression was used to relate the stimuli (oEES) to the binary outcome variable (injured or not injured).

Results: IRFs for the oblique frontal impact and nonoblique frontal impact were computed for the Maximum Abbreviated Injury Scale (MAIS) 2+ and 3+ levels for adults (18–64 years). For a given stimulus, the probability of injury for a belted driver was higher in oblique crashes than in nonoblique frontal crashes. For the 25% injury risk at MAIS 2+ level, the corresponding stimulus for oblique crashes was 40 km/h but it was 64 km/h for nonoblique frontal crashes.

Conclusions: The risk of obtaining MAIS 2+ injuries is significantly higher in oblique crashes than in nonoblique crashes. In the real world, most MAIS 2+ injuries occur in an oEES range from 30 to 60 km/h.     

冲击载荷下各向异性煤体渗透-应力敏感性试验研究*

为揭示冲击煤样渗透率的变化规律，通过立式分离式霍普金森（SHPB）冲击装置对不同层理方向煤样进行动态冲击，进而采用渗透仪对冲击后的煤样进行渗透率测试，分析不同冲击荷载下煤岩的渗透率及应力敏感性。结果表明:冲击煤样的渗透率远大于原煤样品，冲击载荷越大，渗透率越大；在相同的冲击载荷和气体压力下，平行于层理方向的煤样渗透率最大，其次是斜交45°层理方向的煤样渗透率，垂直于层理方向的煤样渗透率最小；渗透率受有效应力影响显著；在冲击荷载的作用下，垂直于层理方向煤样渗透率的变化率对孔隙压力更为敏感。     

风电场环境影响评价原则及评价重点研究

针对风电场环境影响评价的评价原则及评价重点进行了探讨性的研究。提出了风电场环境影响评价应以早期介入和避让措施优先为基本原则；对风电场环境影响评价重点进行了识别，并提出风电场选址的环境可行性分析是风电场环评的重中之重；风电项目建设对生态环境的影响及风机噪声、光影影响也是风电场环境影响评价的重点，并创造性的提出风机噪声光影联合防护区的概念，以期对风电场环境影响评价提供理论及技术参考依据。     

Mitigation performance of the process protection system on the accident consequences of H2S-containing natural gas release and explosion

Toxic loads and explosion overpressure loads pose grave threats to the offshore oil and gas industry. Many safety measures are adopted to prevent and mitigate the adverse impacts caused by toxic loads and explosion overpressure loads. As a general safety barrier, the process protection system has been widely used but rarely evaluated. In order to assess the barrier ability, the mitigation performance of the process protection system is concerned in this study. Firstly, several chain accidents of H₂S-containing natural gas leakage and explosion are simulated by varying the response time of the process protection system with CFD code FLACS. Qualitative assessment is conducted based on the variation of the dangerous load profiles. Furthermore, the quantitative assessment of the mitigation performance is accomplished by considering its ability in reducing the probability of fatality. Emergency evacuation and no emergency evacuation are considered respectively in the quantitative assessment. The results prove that the process protection system takes effect on mitigating the toxic impact and explosion overpressure impact. The results also demonstrate that although the emergency evacuation may result in a severer explosion load to the operator, the process protection system can mitigate the adverse impacts regardless of whether the emergency evacuation is conducted or not.