Potential energy production from organic waste and its environmental and economic impacts at a tertiary institution in Palestine

Municipal solid waste (MSW) is one of the most well-known biomass resources that can be utilized to produce renewable energy. Numerous countries are plagued by the proliferation of waste, particularly organic waste that can be utilized for energy recovery. Palestine suffers from inefficient solid waste management, and only recently have a few projects focused on bioenergy production been implemented. Throughout the years, the city of Tulkarm experiences power outages which cause a challenge to the Palestine Technical University-Kadoorie campus in Tulkarm. Thus, the possibility of energy recovery from the organic portion in Palestine Technical University-Kadoorie was evaluated. The analysis of an economic impact included discussions of a number of economic aspects, including Levelized cost of energy, internal rate of return, present worth, annual worth, and payback period. On the other hand, a carbon dioxide savings analysis and gas emission were evaluated. The outcomes of the energy optimization demonstrated that the suggested system could supply the institution with an average of roughly 7 MWh of electrical energy. According to the economic study, this project offers 0.25 million dollars in present value, 0.144 million dollars in annual value, a 13 percent internal rate of return, a payback period of 6 years, and a levelized cost of energy of 0.11 dollars for each kWh generated. Additionally, the environmental assessment revealed that this system might reduce CO₂ emissions by around 8,343,778 tons. For effective waste management, energy recovery, and emission reduction, it is advised to implement anaerobic digestion technology.     

废旧硬质聚氨酯泡沫塑料的木质素改性及再生

采用含有二乙二醇(DEG)和乙醇胺(ETA)的双组分解交联剂降解废旧硬质聚氨酯泡沫塑料(PU硬泡),并利用降解得到的低聚物多元醇与木质素复合制备出性能增强的再生PU硬泡。通过对制备的再生PU硬泡的红外光谱、密度、吸水率、抗压强度、热稳定性、导热系数、热重曲线等进行分析测试,考察m(DEG)∶m(ETA)对再生PU硬泡性能的影响。实验结果表明:m(DEG)∶m(ETA)=1∶3时废旧PU硬泡的降解效果最好;木质素加入量为2.0%(w)时再生PU硬泡的密度低、抗压强度高、保温性能良好,达到国家标准《建筑绝热用硬质聚氨酯泡沫塑料》(GB/T 21558—2008)的品质要求。     

北京市典型废弃物焚烧源2010—2017年二NFDA1英排放特征和减排效果分析

分析2010—2017年北京市三类典型废弃物焚烧源的废气二NFDA1英排放监测数据,计算排放因子和排放量,评估减排政策成效,并分析不同排放源达标排放时同类物分布特征异同和变化规律,探讨影响排放的重要因素。结果表明: 5家焚烧源平均排放浓度为 0.008～0.069 ng/m³(以TEQ计,下同),废气二NFDA1英排放因子为 0.027～1.7 μg/t,2016年向空气中排放的二NFDA1英量为 0.002 5～0.058 g；生活垃圾、危险废物和医疗废物焚烧源的低、高氯代同类物质量分数比的平均值分别为接近于 0.5、大于0.5和小于0.5,危险废物焚烧源的 ∑PCDFs、∑PCDDs质量分数比的平均值大于2； 123478-HxCDF和123678-HxCDF质量浓度接近且线性相关,具有相近的生成机理和去除效率； I-TEQ变化趋势与∑PCDFs质量分数的变化趋势基本一致,活性炭喷射和布袋除尘的去除效率是影响二NFDA1英排放的重要因素之一；危险废物焚烧源HWI1随运行时间增加排放浓度增加,而及时更换烟道管壁有助于消除“记忆效应”的不良影响。     

Epidemiology of alcohol and drug screening among pedestrian fatalities in the United States, 2014–2016

Objective: U.S. pedestrian fatalities increased by 25% between 2010 and 2015. Risk factors include distractions, the built environment, urbanization, economic variables, and weather conditions. Of interest is the role of alcohol and drugs in premature death among pedestrians. This study sought to explore the prevalence of substance use screenings among pedestrian fatalities in the United States between 2014 and 2016.

Methods: Data were collected from the Fatality Analysis Reporting System provided by the NHTSA. Pedestrian crash variables included demographics as well as information regarding alcohol or drug testing status. Frequency and cross-tabulation tables were constructed to assess the prevalence of screening by person, place, and time. Log-linear analyses were completed to explore age, race, and sex differences. A 3-year examination period was used to control for yearly fluctuations and to incorporate an increasing trend in cases.

Results: Pedestrian fatalities accounted for 84% of all deaths among vulnerable road users during the examination period. Those most at risk were white males between the ages of 45 and 64. Over all states, 74.7% of fatalities were tested for alcohol and 67.1% were tested for drugs; further, 66.5% of cases were tested for both alcohol and drugs and 24.8% were tested for neither substance. Cases screened for both alcohol and drugs ranged from 2.9% in North Carolina to 95.7% in Nevada and those testing for neither substance ranged from a high of 68.9% in Indiana to a low of 1.1% in Maryland. Log-linear regression revealed significant differences in alcohol screening by age and race but not by sex. Differences in drug screening were not identified for any demographic variable. Fatalities tested for alcohol were significantly more likely to be tested for drugs; only 8.2% were screened solely for alcohol and 0.05% were screened for drugs alone.

Conclusions: Preventive strategies become more important as pedestrian crashes and fatalities increase. Risk reduction in the form of policy change, alterations to the built environment, or interdisciplinary approaches to injury prevention is dependent upon best evidence supported in part by more deliberate and consistent screening.     

2016—2017年武汉市城区大气PM2.5污染特征及来源解析

利用2016年1月至2017年9月湖北省环境监测中心站大气复合污染自动监测站的在线监测数据，对武汉市城区PM_2.5的污染特征及主要来源进行解析。结果表明，武汉市城区PM_2.5质量浓度呈现出明显的季节差异，季节变化规律为冬季>春季>秋季>夏季。水溶性离子的主要成分SO₄^2-、NO₃^-和NH₄⁺占总离子质量浓度的82.0%。PM_2.5中阴离子相对阳离子较为亏损，颗粒整体呈碱性。夏季气态污染物的氧化程度较高且SO₂较NO₂氧化程度高。后向轨迹分析结果表明，区域传输是武汉市PM_2.5的一个重要来源，在4个典型重污染阶段，武汉市分别受到局地、东北、西北及西南方向气团传输的影响。PMF模型解析出武汉市PM_2.5五大主要来源及平均贡献率：扬尘22.0%、机动车排放27.7%、二次气溶胶21.6%、重油燃烧14.9%和生物质燃烧13.8%。     

郑州市土壤与绿色植物中汞的分布特征

汞污染具有生物积累性,因而得到社会广泛关注。研究监测和评估了郑州市城区土壤和绿色植物叶片中汞浓度、分布、污染水平等。研究发现郑州市主城区土壤总汞浓度为0. 150～0. 958 mg/kg,平均浓度为0. 448 mg/kg;郑州市主城区绿色植物叶片总汞浓度为0. 017～0. 249 mg/kg,平均浓度为0. 107 mg/kg;土壤和叶片中汞浓度按功能区排序为交通枢纽区工业区商业区行政区高教区住宅区。采用地累积指数法对郑州市80个土壤样品的汞污染水平进行评估,结果显示60%受到轻度污染,35%受到偏中度污染,5%受到中度污染。研究较为全面地分析了土壤汞污染的现状及浓度,为郑州市土壤汞污染防治提供参考。     

石家庄市春季大气颗粒物的铅污染特征

为了解石家庄市2016年春季大气颗粒物的铅污染特征及来源,利用单颗粒气溶胶质谱仪(SPAMS),分析了大气中含铅颗粒的化学成分。结果表明: 研究期间大气环境中含铅颗粒数浓度共出现11次跳跃式升高,跳跃时间段内石家庄均处于轻度污染过程。从成分分析来看,含铅颗粒分为纯铅颗粒、Pb与K(Pb-K)、OC(Pb-OC)、Cl(Pb-Cl)、混合颗粒等八大类。观测结果表明:Pb-K颗粒最多,占到含铅颗粒的84.4%；其次为纯铅颗粒,占比为13.0%。与石家庄市污染源谱库比对进行来源解析,得到Pb-K颗粒主要来自生活垃圾焚烧源, 纯铅颗粒主要来自工业源。结合石家庄市大气污染源排放清单和后向气流轨迹分析,推测含铅颗粒可能来自市区西南方向某区县的生活垃圾焚烧企业。     

Critical review for the quantification of leachate production: Evaluation example for the “Oum Azza” public landfill in Rabat city,Morocco

The estimation of leachate quantities produced in landfills is necessary to dimension the treatment plants allowing to reduce the polluting load of these effluents and consequently avoid their negative impacts on the environment. Different leachate quantification methods were used in this study to assess the leachate volume produced at the Oum Azza landfill. The water balance method give comparable estimations of leachate production to the Ouled Berjal landfill ratio. The first method showed average values between 487 and 495 m³/day for 2015, 2018, and 2019, and at the same time, the second method gave values between 470 and 477 m³/day for the same years. In contrast, the World Bank ratio showed high values that vary between 2260 and 2295 m³/day for 2015, 2018, and 2019. The on-site data and the statistical analysis showed us that the World Bank ratio is not adapted for the estimation of the leachates produced in Oum Azza landfill, while the water balance and the ratio of Ouled Berjal landfill allowed to give comparable results to reality.     

Physico-chemical characterization of Residual Household Waste for energy recovery in insular territories: Case study of Reunion Island

Waste-to-energy is a promising approach to face the current challenge of waste overproduction in Reunion Island, a French territory. In this particular context of an isolated and tropical territory, it is essential to study the properties of potential feedstocks to choose the most appropriate conversion process. This article reports on the composition of Residual Household Waste from Reunion Island and its physico-chemical parameters. Twelve representative samples of Residual Household Waste were subjected to thermal and elemental analysis. The results showed that their composition had a significant influence on the physico-chemical properties, including calorific value. Residual Household Waste from the selective sorting (rich in wood, plastic, and sanitary textiles) as well as dry mixed RHW are the most interesting for energy recovery. Due to their high volatile matter and high carbon content, and their low moisture content, these types of waste have a high calorific value exceeding 18 MJ/kg. Furthermore, the RHW sample comply with the environmental and health criteria applied by French regulations concerning halogen and heavy metal. Thus, it seems that Residual Household Waste can be an alternative to conventional fuels used in incineration or pyro-gasification processes. However, the study also points the need for a pre-treatment process for these wastes. Indeed, it is necessary to sort them correctly in order to avoid the risks of pollution and important maintenance. And more importantly, drying beforehand is unavoidable to improve combustibility and obtain optimal energy conversion.     

Biohythane production from pineapple peel using Methanosarcina mazei enhanced with palm oil mill effluent (POME) sludge in single-stage anaerobic digestion

Biohythane production via single-stage anaerobic digestion (AD) is an effective way for sustainable energy recovery from lignocellulosic biomass. In this paper, biohythane was produced through the AD process from pineapple peel waste substrate using purely cultured Methanosarcina mazei with the enhancement of palm oil mill effluent (POME) sludge as the inoculum. This study focuses on the effects of the lignocellulosic pre-treatment method, the addition of POME sludge into M. mazei culture medium as inoculum, and various operational conditions (food to microorganisms (F/M) ratios, temperature, pH) on gas production performances. The experimental results indicate that these parameters influenced the efficiency of biohythane production by producing the peak maximum biohythane production rate values (HPR_max) and (MPR_max), H₂:CH₄ = 1.93:0.67 L/L-d, and biohythane yield (HY) and (MY), H₂:CH₄ = 1.18:0.55 mL/L-substrate. This study demonstrates that biohythane gas (H₂ + CH₄ + CO₂) production from pineapple waste can be accelerated by M. mazei only with the enhancement of POME sludge through single-stage AD system under mesophilic batch process conditions.