声凝并联合雾化预处理及其在过滤除尘中的应用

根据声凝并理论和雾化湿式除尘理论,建立了燃煤飞灰在声场联合雾化加湿作为预处理的过滤式除尘实验装置。分别在声场、雾化加湿、声场与雾化加湿相结合3种预处理条件下进行实验,确定合适的加湿量范围,得出不同条件下燃煤飞灰的去除效果。在声场联合雾化加湿条件下,分别研究了声压级和雾化加湿量对飞灰的去除率的影响。结果表明,声场和雾化加湿联合作用能有效提高燃煤PM2.5去除率。以声场联合雾化加湿作为预处理进行过滤除尘实验,结果表明,虽然对高效滤料的除尘效率提高作用有限,但是该预处理可减轻滤袋负荷,有效延缓压差增长,降低清灰频率。由于采用表面覆膜滤材,加湿量控制得当可避免产生"糊袋"现象。     

加轴压卸围压下含瓦斯煤岩损伤变形的能量演化机制

采动影响下含瓦斯煤岩的损伤变形是一个极其复杂的非线性过程，单纯依靠传统经典弹塑性力学无法准确分析其破坏机理。针对此情况，通过试验研究了不同初始围压条件下含瓦斯煤岩的损伤变形特征，并分析了损伤变形与能量演化规律之间的内在联系。研究表明:初始围压越高，煤样破坏时强度越大，脆性破坏特征越明显，瓦斯流量急剧增加幅度越大，煤样破坏时积累的总能量和弹性应变能越多，且初始围压与弹性能之间满足对数函数关系。采用累积耗散能定义了煤岩损伤变量，并分析了不同阶段损伤与渗透率之间的演化关系。     

高温高压下煤孔隙结构的变化对瓦斯吸附特性的影响

为了研究高温高压条件下煤孔隙结构变化对瓦斯吸附特性的影响，选取九里山矿无烟煤，在压力为7 MPa、温度为40～130℃的条件下进行等温吸附实验和压汞实验。研究结果表明:煤样对甲烷的等温吸附曲线在该压力、温度条件下符合Ⅰ型吸附曲线特性，吸附规律符合Langmuir吸附模型；在压力7 MPa和温度130℃条件下，煤样的孔隙结构发生一定的变化，煤的比表面积增大、累计孔体积降低，可见孔及裂隙的数量比例增高，加强了煤样孔隙之间的连通度，导致原本吸附在煤样表面的甲烷分子大量解吸；在压力不变的情况下，随着温度的不断增高，煤的极限吸附量逐渐减小，其主要原因是样品孔隙结构的破坏和分子间作用力的变化。     

不同类型压力对飞行员安全绩效的影响规律研究

为探究各类型压力对飞行员安全绩效的影响规律，为飞行员日常工作管理提供依据，选取某航空公司200名飞行员进行压力测试，并调取其近6 a的飞机品质(QAR)数据，通过相关性分析和线性回归分析将飞行员压力数据与其QAR数据进行对比分析，探究飞行员压力对飞行安全绩效的影响规律。研究结果表明:工作负荷压力、家庭压力、人际关系压力和组织管理压力会显著负向影响飞行员安全绩效；角色压力和专业发展压力会显著正向影响飞行员安全绩效。     

负压蒸发技术处理废弃钻井液

采用负压蒸发技术处理3种不同组分的废弃钻井液。实验结果表明:最佳蒸发温度为79℃;当蒸发温度低于95℃时,相15~#原液的出水氨氮质量浓度、悬浮物质量浓度、色度分别低于3.40 mg/L、0.093 mg/L、11倍,达到GB 8978—1996《污水综合排放标准》中的一级排放标准;当蒸发温度低于79℃时,钻井液1和钻井液2的出水氨氮质量浓度均低于37.00 mg/L,悬浮物质量浓度均低于0.080 mg/L,色度低于13倍,COD低于114.0 mg/L,达到GB 8978—1996《污水综合排放标准》中的二级排放标准。通过后续过滤除油工艺可降低钻井液中的石油类质量浓度,使最终出水达标排放。     

对地级市空气自动监测多参数站建设的思考

阐述了地级市空气自动监测多参数站(超级站)建设的必要性,提出了统筹考虑、分期实施与突出重点、兼顾一般的建设思路,介绍了站房选址原则。指出超级站建设应以常规监测、霾监测、光化学烟雾监测、空间立体监测和源解析监测为目标,实施质量控制和质量保证手段,设置数据采集和显示平台,满足对大气复合污染的监测需求。     

初始温度和压力对排污空间甲烷-空气混合物爆燃特性影响的模拟研究

市政排污空间作为城市公共基础设施的重要组成部分，易积聚可燃气体形成爆炸性环境。结合排污空间的特殊环境条件，采用Fluidyn-MP多物理场数值模拟软件，建立了20 L球形爆炸罐分析模型，通过改变初始温度和初始压力，对排污空间甲烷-空气混合物爆燃特性及其变化规律进行模拟研究。结果表明:初始温度升高导致甲烷-空气混合物最大爆炸压力降低，缩短了到达最大爆炸压力的时间；初始压力增加导致最大爆炸压力急剧升高，并延长了到达最大爆炸压力的时间；最大爆炸压力对初始压力的敏感程度远大于初始温度的影响。此外，随着初始温度和初始压力的升高，爆炸火焰平均传播速度增加，而火焰传播速度对初始温度较敏感。     

抛光铝粉爆炸及ABC粉体抑爆特性的实验研究

为研究抛光铝粉的爆炸危险和ABC粉体的抑爆特性，在对实验粉体粒径分布进行分析的基础上，采用20 L粉尘爆炸特性实验装置，分别对不同铝粉尘浓度、不同抑爆剂浓度条件下的爆炸特性参数进行测试。研究结果表明:在实验条件下，铝粉的爆炸下限为45 g/m3＜C＜60 g/m3；随铝粉浓度增加，爆炸烈度呈现出先增强后减弱的变化趋势，在浓度为400 g/m3时爆炸烈度最大。ABC抑爆剂能够有效抑制铝粉爆炸超压和爆炸反应进程，随着惰性粉体浓度的增加，抑制效果愈加明显，爆炸逐渐减弱。当ABC惰性粉体的质量占比增加到50%时，相较单一铝粉爆炸，反应过程时间由72 ms增加至785 ms，爆炸最大压力、最大压力上升速率分别下降了61.7%，89.5%；当ABC粉体质量占比为53%时，铝粉被完全惰化，未发生爆炸。     

A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.