Identification and characterization of extracted microplastics from agricultural soil near industrial area: FTIR and X-ray diffraction method

Microplastics have been found in large quantities in agricultural soil and now become a major global issue. Different types of microplastic have adverse effects on agricultural soil. The most widely used method for the extraction of microplastics in agricultural soil is the density floatation method by using saturated NaCl solution. This method includes the pre-digestion of soil samples with H₂O₂ to remove all the organic matter present in the soil. Different types of microplastic particles were extracted and identified by using ATR-FTIR viz polypropylene, polybutylene tetrapthalate, polyethylene, polystyrene, and polyethylene tetrapthalate. The crystalline nature of extracted microplastic was checked by employing XRD analytical technique. Floatation with higher density saturated sodium chloride (NaCl) solution recovered approximately 80% MPs from soil. Floatation methods were found to be effective for extracting microplastics from soils.     

THOR dummy chest deflection response in oblique and lateral far-side sled tests

Abstract

Objective: The focus of this study is side impact. Though occupant injury assessment and protection in nearside impacts has received considerable attention and safety standards have been promulgated, field studies show that a majority of far-side occupant injuries are focused on the head and thorax. The 50th percentile male Test Device for Human Occupant Restraint (THOR) has been used in oblique and lateral far-side impact sled tests, and regional body accelerations and forces and moments recorded by load cells have been previously reported. The aim of this study is to evaluate the chestband-based deflection responses from these tests.

Methods: The 3-point belt–restrained 50th percentile male THOR dummy was seated upright in a buck consisting of a rigid flat seat, simulated center console, dashboard, far-side side door structure, and armrest. It was designed to conduct pure lateral and oblique impacts. The center console, dashboard, simulated door structure, and armrest were covered with energy-absorbing materials. A center-mounted airbag was mounted to the right side of the seat. Two 59-gage chestbands were routed on the circumference of the thorax, with the upper and lower chestbands at the level of the third and sixth ribs, respectively, following the rib geometry. Oblique and pure lateral far-side impact tests with and without airbags were conducted at 8.3 m/s. Maximum chest deflections were computed by processing temporal contours using custom software and 3 methods: Procedures paralleling human cadaver studies, using the actual anchor point location and actual alignment of the InfraRed Telescoping Rods for the Assessment of Chest Compression (IR-TRACC) in the dummy on each aspect—that is, right or left,—and using the same anchor location of the internal sensor but determining the location of the peak chest deflection on the contour confined to the aspect of the sensor; these were termed the SD, ID, and TD metrics, respectively.

Results: All deformation contours at the upper and lower thorax levels and associated peak deflections are given for all tests. Briefly, the ID metrics were the lowest in magnitude for both pure lateral and oblique modes, regardless of the presence or absence of an airbag. This was followed by the TD metric, and the SD metric produced the greatest deflections.

Conclusion: The chestbands provide a unique opportunity to compute peak deflections that parallel current IR-TRACC-type deflections and allow computation of peak deflections independent of the initial point of attachment to the rib. The differing locations of the peak deflection vectors along the rib contours for different test conditions suggest that a priori attachment is less effective. Further, varying magnitudes of the differences between ID and TD metrics underscore the difficulty in extrapolating ID outputs under different conditions: Pure lateral versus oblique, airbag presence, and thoracic levels. Deflection measurements should, therefore, not be limited to an instrument that can only track from a fixed point. For improved predictions, these results suggest the need to investigate alternative techniques, such as optical methods to improve chest deflection measurements for far-side occupant injury assessment and mitigation.     

State of research on the automation of HAZOP studies

For more than 30 years, multiple research groups have worked on the automation of hazard and operability (HAZOP) studies, or more specifically on the hazard identification process. So far, very few of these approaches have been used in the chemical process industry. Automatic hazard identification is a knowledge-intensive process that demands high standards with regard to the way in which knowledge is stored and made available. There are various suitable approaches to the qualitative modeling of processes and plants, which are the foundation for reasoning systems that are used for the identification of hazards. Additionally, there are quantitative methods that are based on process simulations and can be used to identify potential hazards. The investigation of the state of research demonstrates that there are sophisticated technologies for automated systems that include powerful reasoning techniques. The benefits and shortcomings of existing technologies are discussed with regard to their industrial applicability. Often, the quality of the necessary specific and generic knowledge is not sufficient to detect potential hazardous events and operational malfunctions. Computer-aided HAZOP systems should be integrated with computer-aided design- or process simulation software using common data models based on the digital representation of the process plant. In order to be used by HAZOP practitioners automated systems need to be comprehensive, serve as specialized decision support systems, and be tested and evaluated using round robin tests.     

渭河流域关中段城镇污水处理厂污泥处理技术调查与分析研究

根据渭河流域关中段的污染状况及《(渭河流域水污染防治三年行动方案(2012-2014年)》对科技攻关的实际需求,采用资料搜集、实地调查、问卷发放、数理统计等方式对渭河流域关中段55座城镇污水处理厂的污泥处理情况进行了调查与分析。根据调查分析结果,提出了渭河流域关中段城镇污水处理厂污泥处理技术在应用过程中存在的一些问题,并结合该流域实际情况提出了相应建议,期望能够对该流域污泥处理技术的良性发展提供"第一手"的参考资料。     

中国环境基准研究重点方向探讨

环境基准是环境标准的科学依据,在国家环境质量评价和风险管理体系中处于基础地位。它主要是依据特定对象在环境介质中的暴露数据,以及与环境要素的剂量效应关系数据,通过科学判断得出的,涉及环境化学、毒理学、生态学、流行病学、生物学和风险评估等前沿学科领域。国家环境基准研究是一个长期的系统工程,本文基于环境基准研究的学科特点和国际前沿,结合国家科技需求和相关领域的研究现状,综合分析并提出了未来中国环境基准研究的重点研究方向:1)环境基准的理论与方法学;2)环境基准基础数据库;3)基准目标污染物的筛选甄别和优先排序技术;4)水体营养物基准;5)生物测试与毒性评价技术;6)人体暴露评价理论与相关技术;7)环境基准的审核和校对;8)环境基准与标准转化理论及其对环境管理支撑技术。本文从环境基准学科发展的角度,阐述了与环境基准研究紧密相关的8个重点研究方面的国内外研究进展、关键科学问题以及未来重点研究内容。同时指出,这些重要的研究方向是环境基准研究的根本,未来环境基准的长期战略发展必将是建立在各个重要方向长足发展的基础之上,环境基准研究也必带动这些方向的共同蓬勃发展,为环境地球化学、毒理学、生态学等学科领域发展注入活力。     

寒区典型湿地浮游植物功能群季节变化及其与环境因子关系

安邦河湿地是一个典型的寒区湿地,本文运用功能群的方法对其浮游植物季节变化进行研究,并运用多元分析方法分析其与环境因子的关系.安邦河湿地共有浮游植物种8门104种,划分为14个功能群,分别是C、D、E、F、H1、J、Lo、M、MP、N、P、SN、X1和Y.其中重要功能群是C、D、E、J、Lo、N、P和Y.浮游植物的功能群组成季节变化明显,春季以功能群E和Lo生物量所占比例最大,分别为27.45%和20.49%;夏季以功能群D、J、P占优,为28.59%、18.53%和19.47%;秋季以功能群J、P为主,占39.65%和13.34%.可见,安邦河湿地浮游植物功能群的季节变化呈现为E+Lo→D+J+P→J+P的特点,反映了水环境特征:春季低水温低营养盐、夏季高水温高营养盐且水体混浊、秋季水温和营养盐均较高.运用冗余分析(RDA)分析浮游植物功能群与环境因子之间的关系,结果显示水温(WT)、无机氮(DIN)和溶解性磷酸盐(SRP)是安邦河湿地浮游植物功能群季节变化的主要环境因子.     

Investigation on the interaction between triclosan and bovine serum albumin by spectroscopic methods

Abstract

Multi-spectroscopic and molecular docking methods were used to study the interaction between triclosan (TCS) and bovine serum albumin (BSA). The results indicated that the fluorescence quenching of BSA by TCS was due to the formation of TCS–BSA complex through static quenching. This result was also demonstrated by time-resolved fluorescence experiment. The binding constants and number of binding sites between TCS and BSA were 1.30?×?10⁵ M^?1 and 1.17 at 298?K, respectively. The thermodynamic parameters were studied in detail which suggested that hydrophobic forces and hydrogen bond played major roles in the TCS–BSA interaction. Moreover, the site marker competitive experiments and docking studies revealed that TCS could bind BSA into site I in subdomain IIA. All the results of UV–vis spectrophotometry, circular dichroism spectroscopy and synchronous fluorescence spectroscopy showed that interaction between TCS and BSA induced conformation changes of BSA.     

我国水环境有机物分析前处理技术

介绍了我国水环境有机物分析中常用的前处理技术,包括液液萃取、树脂吸附、固相萃取、固相微萃取、液膜萃取、半透膜被动采样、顶空、吹扫-捕集等,归纳了各种方法的原理、应用及优缺点,并对环境中有机污染物前处理技术的发展方向进行了展望。     

Risk analysis and assessment methodologies in the work sites: On a review, classification and comparative study of the scientific literature of the period 2000-2009

The objective of this work is to determine and study, analyze and elaborate, classify and categorize the main risk analysis and risk-assessment methods and techniques by reviewing the scientific literature. The paper consists of two parts: a) the investigation, presentation and elaboration of the main risk-assessment methodologies and b) the statistical analysis, classification, and comparative study of the corresponding scientific papers published by six representative scientific journals of Elsevier B.V. covering the decade 2000-2009. The scientific literature reviewing showed that the risk analysis and assessment techniques are classified into three main categories: (a) the qualitative, (b) the quantitative, and (c) the hybrid techniques (qualitative-quantitative, semi-quantitative). The qualitative techniques are based both on analytical estimation processes, and on the safety managers-engineers ability. According to quantitative techniques, the risk can be considered as a quantity, which can be estimated and expressed by a mathematical relation, under the help of real accidents’ data recorded in a work site. The hybrid techniques, present a great complexity due to their ad hoc character that prevents a wide spreading. The statistical analysis shows that the quantitative methods present the highest relative frequency (65.63%) while the qualitative a lower one (27.68%). Furthermore the hybrid methods remain constantly at a very low level (6.70%) during the entire processing period.