城市能源利用与环境保护的综合管理初探

能源短缺和环境污染已成为中国推行全面协调可持续发展的重要制约因素,作为能源消耗的主体和环境污染的控制重点,在城市层面推动能源发展战略的转变和强化环境保护是发展的基本要求.鉴于能源与环境之间的高度关联性,在管理方面要求对能源发展和环境保护进行统筹考虑和综合管理,充分强调能源经济效率和环境制约因素在能源发展中的作用.通过制定合理的产业能效标准和排放绩效标准,为城市经济、能源和环境的可持续性发展提供科学性、系统性决策支持.     

Regulated emission characteristics of in-use LNG and diesel semi-trailer towing vehicles under real driving conditions using PEMS

On-road driving emissions of six liquefied natural gas(LNG) and diesel semi-trailer towing vehicles(STTVs) which met China Emission Standard IV and V were tested using Portable Emission Measurement System(PEMS) in northern China.Emission characteristics of these vehicles under real driving conditions were analyzed and proved that on-road emissions of heavy-duty vehicles(HDVs) were underestimated in the past.There were large differences among LNG and diesel vehicles, which also existed between China V vehicles and China IV vehicles.Emission factors showed the highest level under real driving conditions, which probably be caused by frequent acceleration, deceleration, and start-stop.NOx emission factors ranged from 2.855 to 20.939 g/km based on distance-traveled and 6.719–90.557 g/kg based on fuel consumption during whole tests, which were much higher than previous researches on chassis dynamometer.It was inferred from tests that the fuel consumption rate of the test vehicles had a strong correlation with NOx emission, and the exhaust temperature also affected the efficiency of Selected Catalytic Reduction(SCR) aftertreatment system, thus changing the NOx emission greatly.THC emission factors of LNG vehicles were 2.012–10.636 g/km, which were much higher than that of diesel vehicles(0.029–0.185 g/km).Unburned CH_4 may be an important reason for this phenomenon.Further on-road emission tests, especially CH_4 emission test should be carried out in subsequent research.In addition, the Particulate Number(PN) emission factors of diesel vehicles were at a very high level during whole tests, and Diesel Particulate Filter(DPF)should be installed to reduce PN emission.     

Investigation to meet China II emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time, the use of clean and renewable alternative fuel for marine engines is a promising option. In this study, a marine diesel engine, which was modified to run in diesel methanol compound combustion (DMCC) mode, was investigated. After the diesel injection parameters were calibrated, and combined with a sample after-treatment device DOC (diesel oxidation catalyst), the engine could meet the requirements of China II legislation. The overall MSP (methanol substitute percent) reached 54.1%. The value of each pollutant emission was much lower than that in China II emission legislation, and there was almost no methanol and formaldehyde emissions. When methanol was injected into the inlet manifold, the intake air temperature decreased a lot, as well as the exhaust gas temperature, which were beneficial to increase engine thermal efficiency and improve engine room environment. Compared with the engine running in pure diesel mode, when the engine ran in diesel/methanol dual fuel mode, the combustion phase was advanced, and the combustion duration became shorter. Therefore, the engine thermal efficiency increased, and fuel consumption decreased significantly.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds (BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol (SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity. In places with high plant cover in the tropics and in China where air pollution is serious, the effect of BVOCs on ozone and secondary organic aerosols is strong. The present research aims to provide a comprehensive review about the emission rate, emission inventory, research methods, the influencing factors of BVOCs emissions, as well as their impacts on atmospheric environment quality and human health in recent years in Asia based on the summary and analysis of literatures. It is suggested to use field direct measurement method to obtain the emission rate and model method to calculate the emission amount. Several recommendations are given for future investigation and policy development on BVOCs emission.     

Mercury flows in large-scale gold production and implications for Hg pollution control

Large-scale gold production(LSGP) is one of the five convention-related atmospheric mercury(Hg) emission sources in the Minamata Convention on Mercury. However, field experiments on Hg flows of the whole process of LSGP are limited. To identify the atmospheric Hg emission points and understand Hg emission characteristics of LSGP, Hg flows in two gold smelters were studied. Overall atmospheric Hg emissions accounted for 10%–17% of total Hg outputs and the Hg emission factors for all processes were 7.6–9.6 kg/ton. There were three dominant atmospheric Hg emission points in the studied gold smelters, including the exhaust gas of the roasting process, exhaust gas from the environmental fog collection stack and exhaust gas from the converter of the refining process. Atmospheric Hg emissions from the roasting process only accounted for 16%–29% of total emissions and the rest were emitted from the refining process. The overall Hg speciation profile(gaseous elemental Hg/gaseous oxidized Hg/particulate-bound Hg) for LSGP was 34.1/57.1/8.8. The dominant Hg output byproducts included waste acid, sulfuric acid and cyanide leaching residue. Total Hg outputs from these three byproducts were 80% in smelter A and 84% in smelter B. Our study indicated that previous atmospheric Hg emissions from large-scale gold production might have been overestimated.Hg emission control in LSGP is not especially urgent in China compared to other significant emission sources(e.g., cement plants). Instead, LSGP is a potential Hg release source due to the high Hg output proportions to acid and sludge.     

ADMS模型解析城区总悬浮颗粒物来源

以污染源排放数据为基础,应用ADMS-城市扩散模型模拟分析了鞍山市尘各污染源对空气环境质量的贡献。结果表明,来自污染源的浓度贡献值占总量的52%;二次尘及外来尘浓度贡献占48%;矿山开采二次尘的浓度贡献占16%;鞍钢炼铁厂的浓度贡献占19.6%;鞍钢化工总厂浓度贡献占5.6%;供暖锅炉浓度贡献占9.3%。低、中、高架源浓度贡献百分比分别为68.1%、29.0%、2.9%。低架源吨排放量浓度贡献为高架源的2.4倍。     

中国“达标排放”政策的实证分析及理论探讨

以固定点源烟尘排放为例,从排放标准和监测标准两方面讨论了中国现阶段“达标排放”的状况,指出当前的大气污染源达标排放实际上是“初步达标排放”,现在的排放标准和监测规范合适考核污染源的初步达标排放,不适合考核污染源的连续达标排放。排放标准的规定形式、监测规范和适用范围需要改革。现在的排放标准指标需要与监测规范和超标率限值结合起来,以促进污染源的连续达标排放。     

关于室内装修有害气体烘焙排风稀释技术数值研究

依据实测数据,应用数值计算手法,对烘焙排风稀释技术不同工况下总挥发性有机化合物的排除量、烘焙排风稀释阶段室内空气中总挥发性有机化合物的浓度变化进行计算并讨论烘焙温度、换气次数对去除效果的影响。     

中国NOx控制制度研究

中国NOx污染呈现总量逐年增加的趋势,已成为大气污染治理的主要内容.从NOx的控制制度、排放指标上对我国现行NOx控制体系进行了分析,并对我国进一步完善NOx控制制度及标准提出了建议.主要建议有(1)降低NOx控制标准适应当前环境状况;(2)应用科学方法,制订合理的NOx总量控制标准和制度;(3)制订氮氧化物排放标准;(4)浓度控制和总量控制结合.总量控制的实施要注意污染物排放标准制定的政策取向;总量控制法的基本原理和程序;总量控制结合排放标准控制.     

建立土壤硫释放过程的人工神经网络模型

以温度、土壤含水率、胱氨酸添加量和土壤pH值作为土壤释放挥发性含硫化合物的主要影响因素,采用正交实验方法分析这些因素与土壤硫释速率的关系,利用BP神经网络算法对实验结果建模,并用模型对不同影响因素下的土壤硫释放情况进行预测。结果表明,网络模型对学习过的样本有较高预测精度,预测结果相对误差在2％以下,对未学生过的样本,误差为10％左右,表明人工神经网络方法建立的模型适用于土壤硫释放预测。