Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

中国生态环境科技创新体系建设研究

分析国内外生态环境科技创新的发展现状，相比较国外以市场机制为导向、以企业为创新主体、政府通过政策和管辖支撑创新的体系特征，我国已形成四大类环境类科创载体，但尚未形成成熟有效的技术成果产业化机制以及市场与政策协同促进科技创新的发展模式。本文根据生态环境科技创新的强政策驱动性、技术验证放大周期长以及集成性强的特点，重点通过环境技术研发、技术成果转化、技术放大与赋能、产业拓展与推广四个方面阐述了生态环境科技创新体系建设的主要环节：环境技术的研发由以科研机构为主的传统自发性研发、企业迭代性研发和联合应用型研发组成；技术成果的转化经历挖掘发现、技术识别与判断、知识产权评估评价后进入已成立的企业或新设公司，在这一过程中，成果转化专业队伍起着至关重要的作用；技术放大与赋能旨在为有创新技术的企业提供科技创新政策、二次研发中试验证、首台套工程案例、投融资等资源的对接，以协助初创企业成长；产业的拓展与推广则通过为解决环境问题形成集成方案、孵化平台为企业背书和产业政策匹配等方式助力企业长期发展。最后从加强专业化创新平台、技术评估体系、成果转化人才培养体系建设以及疏通投融资渠道等方面对中国未来生态环境科技创新发展提出相关建议。     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

How does population structure affect pollutant discharge in China? Evidence from an improved STIRPAT model

Environmental Science and Pollution Research - China is the most populous country in the world, and the pollution caused by the excessive population should not be underestimated. In recent years,...     

冻融循环作用下尾矿砂抗剪强度和变形特性研究

为探究冻融循环后尾矿物理力学特性的变化特征,使用高低温试验箱和应变控制式三轴剪力仪对处于不同初始条件下的尾矿砂进行不排水不固结试验,揭示了尾矿砂的抗剪强度参数、不同围压条件下的变形模量与冻融循环次数、含水率之间的关系。结果表明:相同含水率条件下,随冻融循环次数增加,尾矿砂黏聚力先减小后趋于稳定,内摩擦角先增大后减小,围压100 k Pa和200 k Pa时变形模量逐渐减小,围压300 k Pa时变形模量呈现先减小后缓慢增大的趋势;相同冻融循环次数条件下,随尾矿砂含水率增加,其黏聚力先增加后减小、内摩擦角不断减小;不同围压条件下变形模量在总体上均呈现出不断减小的变化趋势,围压200 k Pa时变形模量总的衰减量最大,100k Pa次之,300 k Pa最小。     

基于SHERPA的环境空气质量减排情景模拟评估

分析了SHERPA综合评价模型的基本原理和主要建模理念,重点介绍了其在环境空气质量减排情景模拟评估方面的作用,以及在排放源与受体关系(SRR)方面的处理方法,比较了其与欧盟常用的其他情景模拟模型的优缺点。SHERPA模型的特点是空间灵活性较好,对于任何给定地点,可以快速评估不同地区对该研究地点空气质量的影响。SHERPA模型的3个主要功能为污染物来源分析、决策支持和情景模拟。基于SHERPA模型对法国环境空气中PM_(2.5)、PM_(10)和NO_2年均浓度进行污染来源分析、决策支持分析和减排情景模拟评估,展示了模型在环境治理措施优先级筛选和政府间联合治理措施协调建议方面的功能和作用,以期为中国环境空气质量预测预报、环境质量管理措施的制定和成效评估等环境服务与管理工作提供借鉴。     

我国中部城市环境全要素生产率的时空演变——基于Malmquist-Luenberger生产率指数分解方法

采用Malmquist-Luenberger生产率指数模型对我国中部地区80个地级市2003～2015年的城市环境全要素生产率及其分解部分进行了核算,在此基础上计算累积环境全要素生产率,运用核密度法分析了我国中部城市环境全要素生产率的地区差距和动态变化。研究发现:中部城市环境全要素生产率和技术进步分别以年均1. 39%、1. 85%的速度增长,技术效率以年均0. 02%的速度减少,中部城市环境全要素生产率增长主要由技术进步推动,技术效率出现退步迹象。中部地区环境全要素生产率、技术效率和技术进步率城市间差距在逐渐缩小,中部城市间出现明显技术"追赶效应"。     

The associations of air pollution exposure during pregnancy with fetal growth and anthropometric measurements at birth: a systematic review and meta-analysis

Environmental Science and Pollution Research - Fetal growth has been demonstrated to be an important predictor of perinatal and postnatal health. Although the effects of maternal exposure to air...     

显色条件对纳氏试剂分光光度法测定水中氨氮的影响

氨氮是水质监测和评价的重要指标之一。本文探讨了纳氏试剂光度法测定水中氨氮时显色温度和显色时间对测定结果的影响,并从空白测定、显色速率及校准曲线等方面进行了分析,提出了对测定方法的改进建议。     

单宁为模板制备纳米二氧化钛 及其对钍的吸附性能

以杨梅单宁(BT)为模板,水热法合成纳米二氧化钛(BT-NTO)。采用XRD、FTIR、SEM和TEM技术对BT-NTO的结构及形貌进行了表征。将BT-NTO用于吸附溶液中的Th~(4+),在溶液pH为3.5、温度为25℃、Th~(4+)初始浓度为0.5 mmol/L的条件下,BT-NTO对Th~(4+)的吸附量为0.905 8 mmol/g;吸附过程符合准二级动力学方程和Langmuir等温吸附方程;溶液中共存的Zn~(2+)、Ni~(2+)、Co~(2+)、Sr~(2+)、Yb~(3+)、Nd~(3+)、Sm~(3+)、Gd~(3+)、La~(3+)、Cl-、ClO4-离子对Th~(4+)吸附量影响较小;BT-NTO的重复使用性能较好。