The pollution halo effect of technology spillover and pollution haven effect of economic growth in agricultural foreign trade: two sides of the same coin?

Environmental Science and Pollution Research - The existing literature on the environmental Kuznets curve (EKC) fails to investigate the spatial attribute of the “pollution halo” effect...     

衡阳市区和衡山背景站臭氧浓度变化规律的对比分析

选取衡阳市区和衡山背景站臭氧自动监测数据,分析两地的臭氧污染特征。对空气质量的优良率情况、臭氧作为首要污染物的变化情况、臭氧浓度的日变化特征、典型时段的浓度变化特征、臭氧浓度的月际变化特征和臭氧与PM_(2.5)的关联情况等进行了分析。结果表明,多云及阴雨天气时,衡阳市区的臭氧浓度日变化幅度大于衡山背景站。夏季,衡阳市区和衡山背景站的臭氧浓度的日变化特征规律差异较大,臭氧浓度分布比较分散,前者为典型的单峰形,后者则波动平缓。冬季,日变化幅度不大,但衡阳市区的臭氧浓度明显低于衡山背景站。衡山背景站和衡阳市区的臭氧基本同步变化,但日均值高于衡阳市区。     

The application of system dynamics in different practices of a waste management system

The continuous increase in waste generation warrants global management of waste to reduce the adverse economic, social, and environmental impact of waste while achieving goals for sustainability. The complexity of waste management systems due to different waste management practices renders such systems difficult to analyze. System dynamics (SD) approach aids in conceptualizing and analyzing the structure, interactions, and mode of behavior of the complex systems. The impact of the underlying components can therefore be assessed in an integrated way while the impact of possible policies on the system can be studied to implement appropriate decisions. This review summarizes various applications of SD pertinent to the waste management practices in different countries. Practices may include waste generation, reduction, reuse/recovery, recycling, and disposal. Each study supports regional-demanding targets in environmental, social, and economic scopes such as expanding landfill life span, implementing proper disposal fee, global warming mitigation, energy generation/saving, etc. The interacting variables in the WMS are specifically determined based on the defined problem, ultimate goal, and the type of waste. Generally, population and gross domestic product can increase the waste generation. An increase in waste reduction, source separation, and recycling rate could decrease the environmental impact, but it is not necessarily profitable from an economic perspective. Incentives to separate waste and knowledge about waste management are variables that always have a positive impact on the entire system.

     

武汉地区夏季和秋冬季大气污染的天气概念模型

利用2013～2019年武汉市生态环境局监测数据、L波段雷达探空资料、NCEP/NCAR逐日再分析资料,对夏季和秋冬季武汉地区污染日的大气污染特征、边界层结构、环流形势、物理量场进行研究,建立了武汉地区大气污染的天气概念模型.主要结论如下:(1)武汉市空气质量具有季节性变化特征,大气污染程度四季分布表现为冬＞秋＞春＞夏.夏季首要污染物是臭氧,冬季首要污染物是PM2.5.(2)比较挑选出的夏季清洁日和污染日的气象要素特征,污染日逆温的平均强度约为清洁日的一倍,逆温底高一般在600 m以下,空气质量一般为轻度-中度污染;静风频率(37.1％)明显高于清洁日的静风频率(2.9％);污染日平均风速小(0.8 m/s),边界层内相对湿度较低.同样比较秋冬季两类天气的气象要素特征,污染日逆温底高低、厚度小,不及清洁日的一半,不利于污染物的扩散,易出现重度污染天气.静风频率(20％)高于清洁日的静风频率(7.5％),风速小(1.6 m/s),污染日边界层内呈明显上千下湿的格局.(3)建立了夏季大气污染的天气概念模型,污染日副高偏弱位置偏东,长江流域易少雨干旱;地面我国东部大范围地区处于均压场中,武汉地区为偏东北异常小风,不利于大气污染物的扩散.(4)建立了秋冬季大气污染的天气概念模型,长江流域环流平直少波动,配合地面弱低压的天气形势和较强的逆温使得大气污染物聚集在近地面.蒙古冷高压强度偏弱,使得入侵我国的冷空气强度偏弱;武汉地区为偏北小风,对雾霾的移除和稀释扩散作用差.该研究结论可供大气污染预测预警研究和环境管理部门大气污染的联防联控参考.     

A comparison analysis of the decoupling carbon emissions from economic growth in three industries of Heilongjiang province in China

Environmental Science and Pollution Research - Growing environmental pressure urges China to develop in a sustainable and low carbon way, and thus China strives to achieve a carbon peak by 2030 and...     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Association between air pollution and COVID-19 infection: evidence from data at national and municipal levels

Environmental Science and Pollution Research - The impact of high concentrations of air pollution on COVID-19 has been a major air quality and life safety issue in recent studies. This study aimed...     

Injection-Molded Bioblends from Lignin and Biodegradable Polymers: Processing and Performance Evaluation

This paper investigates the effects of the incorporation of lignin and small quantities of epoxidized natural rubber (ENR) as an impact modifying agent on blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL). The addition of lignin resulted in a slight improvement of flexural strength and modulus of the ternary blending system. Incorporation of ENR into the blend resulted in an increase in notched Izod impact strength from 40 to 135% depending on the concentration of ENR. The addition of lignin into the blend resulted in an improvement of thermal stability of the ternary blend system. Morphological analysis showed a good dispersion of PHBV phases and lignin within the PCL matrix. Rheological characterization revealed that the presence of lignin resulted in increased storage modulus of the bioblend.     

Modelling and Optimization of Uranium (VI) Ions Adsorption Onto Nano-ZnO/Chitosan Bio-composite Beads with Response Surface Methodology (RSM)

Nano-ZnO-chitosan bio-composite beads were prepared for the sorption of \({\text{UO}}_{2}^{{2+}}\) from aqueous media. The resulting nano-ZnO/CTS bio-composite beads were characterized by TEM, XRD etc. The sorption of \({\text{UO}}_{2}^{{2+}}\) by bio-composite beads was optimized using RSM. The correlation between four variables was modelled and studied. According to RSM data, correlation coefficients (R²?=?0.99) and probability F-values (F?=?2.24?×?10^??10) show that the model fits the experimental data well. Adsorption capacity for nano-ZnO/CTS bio-composite beads was obtained at 148.7 mg/g under optimum conditions. The results indicate that nano-ZnO/CTS bio-composite beads are appropriate for the adsorption of \({\text{UO}}_{2}^{{2+}}\) ions from aqueous media. Also, the suitability of adsorption values to adsorption isotherms was researched and thermodynamic data were calculated.     

Preparation of Viscose Fibres Stripped of Reactive Dyes and Wrinkle-Free Crosslinked Cotton Textile Finish

The chemical recycling of cellulosic fibres may represent a next-generation fibre–fibre recycling system for cotton textiles, though remaining challenges include how to accommodate fibre blends, dyes, wrinkle-free finishes, and other impurities from finishing. These challenges may disrupt the regeneration process steps and reduce the fibre quality. This study examines the impact on regenerated viscose fibre properties of a novel alkaline/acid bleaching sequence to strip reactive dyes and dimethyloldihydroxyethyleneureas (DMDHEU) wrinkle-free finish from cotton textiles. Potentially, such a bleaching sequence could advantageously be integrated into the viscose process, reducing the costs and environmental impact of the product. The study investigates the spinning performance and mechanical properties (e.g., tenacity and elongation) of the regenerated viscose fibres. The alkaline/acid bleaching sequence was found to strip the reactive dye and DMDHEU wrinkle-free finish from the cotton fabric, so the resulting pulp could successfully be spun into viscose fibres, though the mechanical properties of these fibres were worse than those of commercial viscose fibres. This study finds that reactive dyes and DMDHEU wrinkle-free finish affect the viscose dope quality and the regeneration performance. The results might lead to progress in overcoming quality challenges in cellulosic chemical recycling.