Simultaneous determination of parathion and p-nitrophenol in vegetable tissues by derivative spectrophotometry

A first derivative spectrophotometric method has been developedfor the determination of parathion and p-nitrophenol in vegetabletissues. Ethanol was used as solvent for extracting the compoundsfrom the tissues and subsequently the samples were evaluated against a vegetable tissue blank, directly by derivative spectrophotometry. The simultaneous determination of these compounds can be carried out using the zero-crossing approach for parathion at 253.0 nm and for p-nitrophenol at 273.1 nm. In the samples each analyte was determined in the presence of one another in the ranges between 4.9 to 3883.5 g g^-1 forparathion and 4.9 to 3285.3 g g^-1 for p-nitrophenol.The detection limits (3) were found to be 1.5 and 1.4 g g^-1 for parathion and p-nitrophenol, respectively. The relative standard deviations were in all instances less than1.8%. The proposed method was applied to the determination ofthe analytes in spiked leafs of corn. The results show a goodrecovery and they are in agreement with those obtained bypolarography.     

Regional Variations in the Implementation of the Local Air Quality Management Process within Great Britain

The UK National Air Quality Strategy has required local authorities to review and assess air quality in their area of jurisdiction and determine locations in their areas where concentrations of specific air quality pollutants are predicted to exceed national air quality objectives in the future. Statutory air quality management areas (AQMAs) are designated where air quality is predicted to be above specified objective concentrations by specific target dates, and statutory air quality action plans will be necessary to improve the local air quality within these areas. Over 124 local authorities in England (including London), Wales and Scotland anticipate declaring AQMAs following the conclusion of the statutory air quality review and assessment process. However, other influences are being exerted on the local air quality management process and AQMA decision-making processes. Such influences include regional and sub- regional collaborative working between local authorities and government agencies and wider political decision-making processes. Some regions of Great Britain (encompassing England (including London), Scotland and Wales) anticipate many AQMA designations, whilst other regions are not anticipating any such designations despite apparently similar air quality circumstances. Evidence for regional or sub-regional variations in the locations of anticipated AQMAs are examined through an evaluation of the outcomes of the scientific review and assessment process undertaken by local authorities declaring AQMAs, and through a local authority survey to identify influences on decision-making processes at a level above that of the local authority. Regional variation is reported in the type of pollutant causing AQMAs to be declared, in the numbers of AQMAs in regions and in the spatial distribution of AQMAs across Great Britain.     

Evidence of integration of air quality management in the decision-making processes and procedures of English local government

The air quality management (AQM) framework in the UK is a risk management approach using effects-based objectives for air pollutants to determine the need for action. The Environment Act 1995 required a National Air Quality Strategy to be published, setting out health-based standards and objectives for eight pollutants, of which seven are to managed at a local scale. Because of the variety of sources of air pollution, if the AQM process is to succeed in the long term, solutions to identified problems will be required from transport, land use and economic planning sectors of local government in liaison with various other agencies, regulators and outside bodies. As such the task is inherently multi-disciplinary and an integrated, collaborative approach will be necessary. Although this observation is now fairly well documented, there is still little guidance relating to how, in relation to air quality management, integration can actually be accomplished. This paper presents some observations from case studies undertaken as part of a longer-term research study and in particular focuses on the identified problems of involving non-air-quality professionals in a highly technical scientific process. Various approaches to the collaborative aspects of air quality management will be presented. These case studies represent local authorities of different sizes in different political and organisational situations facing a range of air quality challenges. The creation of project teams or task forces is judged particularly useful for local air quality management. Methods that could be applied more widely include appointing individuals as integrators, and rotation of key personnel.     

Designating Air Quality Management Areas (AQMAs) in the UK Implications for Securing UK Air Quality Objectives

Across the United Kingdom, the majority of local authoritieshave now completed their first phase of local air qualityreview and assessment work, as required under the AirQuality Strategy for England, Scotland, Wales and NorthernIreland (DETR, 2000a). Emerging from this first phasework is an anticipated suite of over 110 Air QualityManagement Areas (AQMAs). These areas are identifiedlocations where one or more of the national air qualityobjectives are predicted to exceed by specific target dates,and their spatial extent and shape is emerging as highlyvariable. Local authorities are guided to use a variety ofscientific tools to underpin the scientific assessments, anda consideration of uncertainty in both the tools used andsubsequent delineation of AQMAs is likely to affect theemerging management areas significantly. With subsidiarity underpinning the process of local air qualitymanagement (LAQM), local decision-making is anticipated toinfluence the outcome of the LAQM process in its entirety,with the declaration of AQMAs necessitating the preparationand implementation of air quality action plans. UKexperience of the effective management of local air quality,through the designation of AQMAs, demonstrates a valuableframework for other European countries developing mechanismsto manage air quality locally.     

Bioremediation of tributyltin contaminated sediment: degradation enhancement and improvement of bioavailability to promote treatment processes

Bioremediation of tributyltin (TBT) contaminated sediment was studied and degradation enhancement and improvement of bioavailability were also investigated. In TBT spiked sediment, the half-life of TBT in the control sample, representing natural attenuation, was 578 d indicating its persistence. In the stimulated sample (pH 7.5, aeration and incubated at 28 °C), the half-life was significantly reduced to 11 d. Further stimulation by nutrient addition (succinate, glycerol and l-arginine) or inoculation with Enterobacter cloacae (∼10⁷ viable cells g⁻¹ of sediment) resulted in half-life reduction to 9 and 10 d, respectively. In non-spiked sediment, the indigenous microorganisms were able to degrade aged TBT, but the extended period of contamination decreased the degradation efficiency. To improve bioavailability, addition of surfactant, adjustment of salinity and sonication were studied. The highest percentage solubilisation of TBT in water was obtained by adjusting salinity to 20 psu, which increased the solubility of TBT from 13% to 33%. Half-lives after bioavailability was improved were 5, 4 and 4 d for stimulation, stimulation w/nutrient addition and stimulation w/inoculation, respectively. However, natural attenuation in the control sample was not enhanced. The results show that providing suitable conditions is important in enhancing TBT biodegradation, and bioavailability improvement additionally increased the rate and degraded amount of TBT. Unfortunately, nutrient addition and inoculation of the degrader did not enhance the degradation appreciably.     

Local air quality management as a risk management process: assessing, managing and remediating the risk of exceeding an air quality objective in Great Britain

Air quality is managed in Great Britain via an effects-based, risk management process designed to provide a dynamic solution to public health issues associated with elevated concentrations of seven specified air pollutants. This paper is concerned with an examination and evaluation of the process of Local Air Quality Management (LAQM) in Great Britain from the late 1980s to date as a risk management process. The statutory basis of LAQM process is provided by the Environment Act 1995. The Act provides a framework in which national and local actions are required to identify and remediate areas of poor air quality. Within this framework, the implementation of the process at national and local levels is considered, leading to an identification and assessment of risks in the formulation and implementation of air quality management policy and practice. Local Authorities began the process of Review and Assessment in 1999 and the first round of the process concluded in 2001. Following this, some 129 Local Authorities declared one or more Air Quality Management Areas (AQMAs). The Review and Assessment elements of the framework were subjected to an evaluation in 2001 and the essential elements of it were confirmed as fit for purpose. The evaluation led to a confirmation of the process of LAQM but also a simplification based on the experience of Round 1. Now, a two step process is required comprising of an Updating and Screening Assessment and, where a risk of exceeding an Air Quality Objective (AQO) is identified, a Detailed Assessment follows. The Government has identified a time scale for Review and Assessment through to 2010 and also introduced the requirement of a regular Progress Report in order that a Local Authority is able to address routine matters of air quality management. The risks inherent in epidemiological or scientific uncertainty are factored into the LAQM process at an early stage of the process and, by identifying the risks and subjecting them to regular review, the process provides a 'level playing field' across spatial and temporal scales. Whilst the process of LAQM described in this paper has been developed for Great Britain, the generic elements of the process are applicable to other countries challenged by air pollution problems which require both national and local action to resolve them.     

Invertebrate Morphospecies as Surrogates for Species: A Case Study

Environmental monitoring and conservation evaluation in terrestrial habitats may be enhanced by the use of invertebrate inventories, but taxonomic and logistic constraints frequently encountered during conventional taxonomic treatment have greatly restricted their use. To overcome this problem we suggest that nonspecialists may be used to classify invertebrates to morphospecies without compromising scientific accuracy. To test this proposition, large pitfall and litter samples of ants, beetles, and spiders from four forest types were sorted to morphospecies by a nonspecialist and to species by specialists. These data were used to generate morphospecies and species inventories and to estimate richness (α diversity) and turnover (β diversity), information frequently used in the above activities. Our results show that the estimates of richness of ants and spiders varied little between morphospecies and species inventories. Differences between estimates of beetle richness were largely influenced by errors of identification in two families, Curculionidae and Staphylinidae. But morphospecies and species inventories yielded identical ranking of forest type using richness. Turnover was assessed by sample ordination, which revealed similar clusters regardless of the type of inventory. Analysis of similarities of assemblages of ants and beetles showed significant differences between all forest types. Spider assemblages showed a lower level of discrimination. The assessment of turnover was consistent among inventories but different between the major taxa. Our findings suggest that morphospecies may be used as surrogates for species in some environmental monitoring and conservation, in particular when decisions are guided by estimates of richness and the assessment of turnover.     

A Possible Method for the Rapid Assessment of Biodiversity

Inventories of vertebrate and flowering plants are frequently used as surrogates for estimates of total biodiversity. This is in part because the inclusion of invertebrates and nonflowering plants is perceived as being too time-consuming, costly, and difficult because of the shortage of specialists. Estimates of the species richness of field samples of spiders, ants, polychaetes, and mosses made by a biodiversity technician and by specialist taxonomists were compared. The biodiversity technician received a few hours training in the taxonomy of each group and separated specimens into recognizable taxonomic units (RTUs). The specialists sorted to species. For the three animal groups the biodiversity technician recorded 165 taxa and the specialists 147, with the error for the ants and spiders being 13% or less. A small amount of splitting and lumping of species was detected. The concordance of estimates remained very similar when small subsamples were used. The procedure was repeated by 13 undergraduates using a subsample of spiders. Their average error was 14.4%. The greatest similarity in estimates was for the mosses, but with high levels of splitting and lumping this result was entirely fortuitous. The results suggest that RTU estimates made by biodiversity technicians may be sufficiently close to formal taxonomic estimates of species richness to be useful for the rapid assessment of biodiversity. They also show, however, that the procedures outlined here should be used on invertebrate and nonflowering plant groups before they can be confidently included in biodiversity surveys.     

Outcomes of the first round of local authority air quality Review and Assessments under the UK's air quality strategy

In 1997, the UK government instigated the practice of Local Air Quality Management (LAQM) in the UK. This process is based on local authorities undertaking Review and Assessments of air quality within their areas. The first round of Review and Assessments have now been completed and represents the most extensive and coordinated analysis of air pollution ever undertaken in the UK, and probably in Europe. This paper takes a broad look at the outcomes of this process so far and identifies some of the key areas where lessons have/can be learnt both about patterns of air pollution in the UK and about the framework for investigating these that has been implemented under the LAQM regime. The process has led to a much higher number of local authorities finding problems with air pollution than initially expected. It has also challenged many assumptions about the significance of various pollutants and their sources.