Effect of humic deposit (leonardite) on degradation of semi-volatile and heavy hydrocarbons and soil quality in crude-oil-contaminated soil

In order to investigate the bioremedial potential of humic deposit (leonardite), the effects of the treatments of leonardite and a commercial bioaugmentation agent on the degradation of a variety of petroleum hydrocarbons (C13–C31) and soil enzyme activities (urease acid-alkaline phosphatase and dehydrogenase) were tested within a soil incubation experiment lasting 120 days. Experimentally crude-oil-contaminated soil (2.5%) was regulated to a C:N:P ratio (100:15:1; Oilcon), amended with 5% of leonardite and regulated to the same C:N:P ratio (Oilcon-L) or mixed with a commercial bioaugmentation product (Oilcon-B), respectively. In the short period of incubation (60 days), Oilcon and Oilcon-B treatments showed higher hydrocarbon degradations, whereas Oilcon-L showed higher hydrocarbon degradation over Oilcon and Oilcon-B treatments in the long-term (120 days). Applying contaminated soil with leonardite increased urease (LSD, 4.978, *P?<?0.05) and dehydrogenase (LSD, 0.660, *P?<?0.05) activities. However, acid and alkaline phosphatase activities showed no certain inclination between different treatments. Dehydrogenase seemed to be more related to hydrocarbon degradation process. Overall results showed that leonardite enhanced biodegradation of petroleum hydrocarbons and also stimulated soil ecological quality measured as soil enzyme activities.     

Classification of residential areas according to physical vulnerability to natural hazards: a case study of Çanakkale,Turkey

The selection of new settlement areas and the construction of safe buildings, as well as rendering built‐up areas safe, are of great importance in mitigating the damage caused by natural disasters. Most cities in Turkey are unprepared for natural hazards. In this paper, Çanakkale, located in a first‐degree seismic zone and sprawled around the Sartçay Delta, is examined in terms of its physical vulnerability to natural hazards. Residential areas are analysed using GIS (geographic information system) and remote‐sensing technologies in relation to selected indicators. Residential areas of the city are divided into zones according to an evaluation of geological characteristics, the built‐up area's features, and urban infrastructure, and four risk zones are determined. The results of the analysis show that the areas of the city suitable for housing are very limited. In addition, the historical centre and the housing areas near Sartçay stream are shown to be most problematic in terms of natural disasters and sustainability.     

Properties of Biocomposite Films From PLA and Thermally Treated Wood Modified with Silver Nanoparticles Using Leaf Extracts of Oriental Sweetgum

Journal of Polymers and the Environment - The technological, thermal, and antimicrobial properties of biocomposite films produced from polylactic acid (PLA) and thermally treated wood flour with in...     

Determination of air quality zones in Turkey

In this study, the particulate matter (with an aerodynamic diameter <10 μm; PM₁₀) profile of Turkey with data from the air quality monitoring stations located throughout the country was used. The number of stations (119) was reduced to 55 after a missing data treatment for statistical analyses. First, a classification method was developed based on ongoing national and international (European Commission directives) legislations to categorize air zones into six groups, from a “Very Clear Air Zone” to a “Polluted Air Zone.” Then, a Geographic Information System (GIS)-based interpolation technique and statistical analyses (correlation analysis and factor analysis) were used to generate PM₁₀ pollution profiles of the annual heating time and nonheating time periods. Finally, the coherent air pollution management zones of Turkey, based on air quality criteria and measured data using a GIS-based model supported by statistical analyses, were suggested. Based on the analysis, four hot spots were identified: (i) the eastern part of the Black Sea region; (ii) the northeastern part of inland Anatolia; (iii) the western part of Northeastern Anatolia; and (vi) the eastern part of Turkey. The possible reasons for the elevated PM₁₀ levels are discussed using topographic, climatologic, land use, and energy utilization parameters. Finally, the suggested air zones were compared with the administrative air zones, which were newly developed by the Turkish Ministry of Environment and Forestry, to evaluate the level of agreement between the two.

Implications: The evaluation of air quality profiles of specific regions is important in the development and/or application of an effective air quality management strategy. Factor analysis (FA), together with correlation analysis (CA), provides useful information to classify air pollution management areas over regional networks that have historical time-series air quality data. In this study, which relied on a FA- and CA-based methodology, the coherent air pollution management zones of Turkey after using a GIS-based model were suggested. Policy makers and scientist can use these suggested zones to construct better air quality management strategies.     

Effect of vegetation change from native broadleaf forest to coniferous plantation on selected soil properties

The objective of this study was to examine the effects of vegetation change from a native broadleaf forest to a coniferous plantation on selected soil properties, including soil texture, pH, organic matter, total nitrogen (N), total phosphorus (P), exchangeable cations (Ca²⁺, K⁺, Na⁺), and cation exchange capacity (CEC). Results showed that the amount of clay particles, Ca²⁺, and K⁺ values significantly increased, whereas Na⁺, total N, and organic matter and soil pH values decreased on the treatment plot after vegetation change. Soil acidity also increased and soil textural group changed from moderately fine-textured soils (clay loam) to medium-textured soils (loam) under both control and treatment plots. Organic matter, total N, and Na⁺ values increased, whereas Ca²⁺ concentration decreased through time on the control plot. Soil pH, total P, K⁺, and CEC did not show significant changes through time on the control plot.     

Properties of steel foundry electric arc furnace dust solidified/stabilized with Portland cement

Electric arc furnace dust from steel production is generated in considerable amounts worldwide and needs to be treated as hazardous waste. The aim of this study was to investigate the properties of electric arc furnace dust solidified/stabilized by using Portland cement. Mortar and paste samples were prepared with varying waste-to-binder ratios between 0% and 90%. A comprehensive experimental program was designed including XRF characterization, setting time, unconfined compressive strength, and toxicity characteristics leaching procedure (TCLP), synthetic precipitation leaching procedure (SPLP), and acid neutralization capacity (ANC) tests. The results were evaluated in order to determine if the solidified /stabilized product can be disposed of at a landfill site with domestic waste or at a segregated landfill. The effect of using sand on S/S performance was also investigated. The results indicated that the solidification /stabilization process using PC helps the heavy metals to be bound in the cement matrix, but the TCLP leaching results exceeded the EPA landfilling limits. The SPLP leaching results conformed to the limits implying that the waste or S/S products can be disposed of at a segregated landfill; however the low ANC of the S/S products reveals that there may be leaching in the long-term. The sand used in the mortar samples adversely affected the S/S performance, causing higher heavy metal leaching levels, and lower pH levels in the leachate after the TCLP extraction than those measured in the leachate of the paste samples.     

Migration of polycyclic aromatic hydrocarbons (PAHs) in urban treatment sludge to the air during PAH removal applications

In the present study, the amounts of polycylic aromatic hydrocarbons (PAHs) penetrating into air during PAH removal applications from the urban treatment sludge were investigated. The effects of the temperature, photocatalyst type, and dose on the PAH removal efficiencies and PAH evaporation were explained. The sludge samples were taken from an urban wastewater treatment plant located in the city of Bursa, with 585,000 equivalent population. The ultraviolet C (UV-C) light of 254 nm wavelength was used within the UV applications performed on a specially designed setup. Internal air of the setup was vacuumed through polyurethane foam (PUF) columns in order to collect the evaporated PAHs from the sludge during the PAH removal applications. All experiments were performed with three repetitions. The PAH concentrations were measured by gas chromatography–mass spectrometry (GC-MS). It was observed that the amounts of PAHs penetrating into the air were increased with increase of temperature, and more than 80% of PAHs migrated to the air consisted of 3-ring compounds during the UV and UV-diethylamine (DEA) experiments at 38 and 53 °C. It was determined that 40% decrease was ensured in Σ₁₂ (total of 12) PAH amounts with UV application and 13% of PAHs in sludge penetrated into the air. In the UV-TiO₂ applications, a maximum 80% of Σ₁₂ PAH removal was obtained by adding 0.5% TiO₂ of dry weight of sludge. The quantity of PAH penetrating into air did not exceed 15%. UV-TiO₂ applications ensured high levels of PAH removal in the sludge and also reduced the quantity of PAH penetrating into the air. Within the scope of the samples added with DEA, there was no increase in PAH removal efficiencies and the penetration of PAHs into air was not decreased. In light of these data, it was concluded that UV-TiO₂ application is the most suitable PAH removal alternative that restricts the convection of PAH pollution.

Implications: Polycyclic aromatic hydrocarbon (PAH) evaporation rates from sludge samples obtained from an urban wastewater treatment plant were investigated here for the first time by employing removal applications. TiO₂ and diethylamine were used as photocatalysts in this study. A special device was designed and successfully used in this study. Treatment sludge can be a significant source of PAHs for the atmosphere. The data highlight the need for removal of PAHs in treatment sludge via methods limiting their evaporation to the air. It was observed that UV-TiO₂ application was the most suitable PAH removal alternative that restricts the convection of PAH pollution.     

Distant source contributions to PM10 profile evaluated by SOM based cluster analysis of air mass trajectory sets

This paper evaluates the effects of long-range transport patterns of air masses to the regional PM profile in a megacity, Istanbul, Turkey. Five-day hourly backward trajectories were obtained by the HYSPLIT model for selected episodic events in 2008. Self Organizing Maps (SOM), a very powerful classification tool, was used to cluster these trajectories. In total, eight cluster groups were obtained. All of the clusters were evaluated with respect to inhalable particulate matter (PM₁₀) concentrations observed in Istanbul for the arrival times of the trajectories. Istanbul is generally under the effect of trajectories in three clusters (1, 2 and 4) (52% of all pre-selected episodic events), which have higher mean concentration values than the mean value of all the samples. These clusters typically make significant PM contributions to Istanbul's air quality. PM loadings of the trajectories in these clusters were attributed to massive anthropogenic activity over all of Europe and southwestern air flow most likely carrying PM₁₀ atmospheric particles originating from the Saharan Desert and other global dust generation regions located in the northern part of Africa.     

Long-range potential source contributions of episodic aerosol events to PM10 profile of a megacity

This paper evaluates possible long-range source contributions to the PM₁₀ profile of Istanbul, Turkey. A novel method for classifying PM₁₀ episodic events resulting from long-range transport, as opposed to local ones, was implemented. Hourly PM₁₀ mass concentrations from ten stations distributed throughout Istanbul during the year 2008 were used for this purpose. Hourly backward trajectories for the arrival of air masses to the center of Istanbul for the year 2008 were calculated using the HYSPLIT (Hybrid Single-Particle Lagrangian Integrated Trajectory) model. Significant episodes from these backward trajectories were selected and employed in Potential Source Contribution Function (PSCF) analysis to estimate the possible contribution of long-range PM₁₀ transport (LRPMT) to observed PM₁₀ concentrations. The PSCF results showed significant seasonal variations. Based on the results obtained, PM₁₀ concentrations observed in Istanbul during summer and autumn are not heavily affected by LRPMT. Mediterranean countries, especially those of the central part of northern Africa (northern Algeria and Libya) are the most significant potential PM₁₀ contributors to Istanbul's atmosphere during springtime. During winter, Balkan countries, including the Aegean part of Turkey, Greece, Bulgaria, Serbia, and Croatia, as well as northern Italy, eastern France, southern Germany, Austria and the eastern part of Russia, were the most important LRPMT source regions for high PSCF values.