Solubility parameters for determining optimal solvents for separating PVC from PVC-coated PET fibers

Poly(vinyl chloride) (PVC) in PVC-coated poly(ethylene terephthalate) (PET) fabrics can be separated through dissolution in a suitable solvent, leaving only the PET fibers. We investigated the solubility of PVC in 30 solvents using swelling tests. The results were compared with those obtained using the Hansen, Gutmann, Swain, E _T(30), and Kamlet–Taft parameters. For this purpose, Gaussian plots of the PVC swellability versus solubility parameter were used to decide the applicability of the solubility parameter system. Only Gutmann’s electron acceptor–donor parameter (AN + DN) and the Kamlet–Taft parameters β and π* could describe the PVC-solvent system satisfactorily. Tetrahydrofuran (THF), methyl ethyl ketone (MEK), N,N-dimethylformamide (DMF), cyclohexanone, and cyclopentanone were tested for separating PVC from PET at different temperatures. THF dissolved PVC at 20 °C, while cyclohexanone and cyclopentanone did so at 40 °C. Traces of PVC remained on the PET fibers when DMF was used. Complete dissolution of PVC was not achieved at any temperature with MEK. The present work shows that solubility parameters are a helpful tool for the search for suitable solvents. It shows also that solubility parameters have to be selected carefully, since their usefulness depends strongly on the polymer properties.     

Levels and tissue-dependent distribution of dioxin in Japanese domestic leafy vegetables--from the 1999 national investigation

In 1999, Japanese domestic leafy vegetables were successively investigated for levels of dioxins, including 17 dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), four non-ortho co-planar PCBs (co-PCBs) and eight mono-ortho co-PCBs, all of which had been assigned toxic equivalency factors (TEFs) by WHO in 1997. The mean levels of dioxins in the edible portions were 0.07 (0.09) pg TEQ/g in spinach, 0.13 (0.14) pgTEQ/g in garland chrysanthemum, 0.01 (0.04) pg TEQ/g in mitsuba (marsh parsley) and 0.01 (0.03) pg TEQ/g in chingentsuai (Brassica Campestris var. chinesis), when non-detects were set to zero (and set to half the limit of detection). In order to understand the dioxin pollution of leafy vegetables in detail, a further investigation of dioxin levels in the tissues of spinach was conducted. As a result, the dioxin levels in the leaves were found to be higher than those in the stem and red collar, but they were much lower than those found in the primary and secondary roots, which are considerably affected by the soil, which is recognized as a sink of airborne dioxins. The dioxin levels in edible portions (leaves, stem and red collar) were obviously lower than those in non-edible portions (primary and secondary roots). In addition, from the finding that several lower-chlorinated PCDD/Fs and co-PCBs, namely 2,3,7,8-TCDD/F, 1,2,3,7,8-PeCDD, 1,2,3,7,8/2,3,4,7,8-PeCDFs, 1,2,3,7,8,9-HxCDD, 1,2,3,4,7,8-/1,2,3,6,7,8-HxCDFs, 3,3',4,4'-TCB, 2,3,3',4,4'-/2,3',4,4',5-PeCBs, and 2,3',4,4',5,5'-HxCB, were more highly represented in the dioxins in the leaves than in those in the secondary roots, it was suggested that in leafy vegetables the deposition of gaseous, presumably moderately volatile dioxins in leaf wax is another pollution pathway in addition to the adhesion of dioxin-contaminated particles including soil.     

Modification of carbon-coated TiO2 by iron to increase adsorptivity and photoactivity for phenol

Carbon-coated TiO(2) modified by iron, were prepared from TiO(2) of anatase structure and PET modified by FeC(2)O(4). Catalysts were prepared by mixing powders of TiO(2) and modified PET and heating at different temperatures, from 400 to 800 degrees C under flow of Ar gas. High adsorption of phenol was observed on the catalyst heated at 400 degrees C, confirmed by FT-IR analysis. On this catalyst, fast rate of phenol decomposition was achieved by addition of small amount of H(2)O(2) to the reaction mixture. Phenol decomposition proceeded mainly through the direct oxidation of phenol species adsorbed on the catalyst surface due to the photo-Fenton reaction. Iron-modified carbon-coated TiO(2) catalysts heated at 500-800 degrees C showed almost no phenol adsorption or oxidation.     

Polychlorinated biphenyls (PCBs) analysis using a miniaturized high-resolution time-of-flight mass spectrometer "MULTUM-S II"

In this study, we conducted polychlorinated biphenyls (PCBs) analysis using fast gas chromatography (GC)/high-resolution mass spectrometry (HRMS). Mass spectrometry (MS) was performed with a miniature multi-turn time-of-flight (TOF) analyzer called "MULTUM-S II". MULTUM-S II is truly a portable high resolution mass spectrometer. The mass spectrometer's high resolution capability is due to its theoretical infinite flight path utilizing perfect space and time focusing within a closed flight orbit. Mass resolution above 10?000 was easily achievable employing this portable system. This mass resolution is comparable to magnetic sector mass spectrometers, which have traditionally performed PCB analyses in the past. At a resolution of 10?000, a limit-of-detection of 1 ppb was determined using a heptachlorinated biphenyl standard sample. Using this fast GC/HRMS, 66 PCB congeners were analyzed within 5 min. In addition experiments aimed at confirming interference of PCB signal peaks and matrix peaks in diluted dielectric coolant fluids were performed. We found that the PCB signal peaks were detected without matrix interference via high mass resolution.     

Pathways and Kinetics on Photocatalytic Destruction of Aqueous Phenol

In this study, the TiO₂ photocatalytic decomposition process of aqueous phenol was investigated. The intermediate products generated in the elementary reaction steps in the mineralization process were experimentally identified as hydroquinone, catechol and hydroxyhydroquinone. The concentration variations of these intermediate products with time passage were traced by high performance liquid chromatograph. The pathways of the decomposition process were given. Based on Langmuir isothermal theory and Langmuir-Hinshelwood mechanism, the multi-compounds competition kinetic model was established. In this model, the observed time-dependent concentrations of phenol and the intermediate products were simulated.     

Update of daily intake of PCDDs, PCDFs, and dioxin-like PCBs from food in Japan

Total diet study (TDS) samples of 14 food groups from 16 locations in Japan, collected in 1999 and 2000, were analyzed for polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (dioxin-like PCBs) to estimate the update of daily intake of these contaminants from food. The mean daily intake of toxic equivalency (TEQ) for an adult weighing 50 kg, calculated at non-detected isomer concentrations equal to zero (ND=0), was estimated to be 2.25 pg TEQ/kg b.w./day. When non-detected isomer concentrations are assumed to be equal to half of the limits of detection (ND=1/2 LOD), the mean daily intake was estimated to be 3.22 pg TEQ/kg b.w./day. These values were below the tolerable daily intake (TDI) of 4 pg TEQ/kg b.w. for PCDD/Fs and dioxin-like PCBs set in Japan. In both the estimates, the mean daily intakes were highest from fish and shellfish (76.9% at ND=0 and 53.9% at ND=1/2 LOD of the total TEQs), followed by those from meat and eggs (15.5% at ND=0 and 11.7% at ND=1/2 LOD of the total TEQs). Congener specific data revealed that these total TEQ levels were dominated by 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and 3,3^′,4,4^′,5-PeCB in each case (71.7% at ND=0 and 63.1% at ND=1/2 LOD of the total TEQs). The dioxin-like PCBs (non-ortho and mono-ortho PCBs) accounted for about 50% of these total TEQs. These data will be very useful in the risk assessment of PCDD/Fs and dioxin-like PCBs from food in Japan.     

Alkaline hydrolysis of PVC-coated PET fibers for simultaneous recycling of PET and PVC

Journal of Material Cycles and Waste Management - Polyvinyl chloride (PVC)-coated poly(ethylene terephthalate) (PET) woven fibers are one of the hardest-to-recycle polymeric materials. Herein we...     

Antibiotic removal from waste milk by electrochemical process: degradation characteristics in concentrated organic solution

Journal of Material Cycles and Waste Management - The use of antibiotics in lactating dairy cows produces waste milk containing antibiotic residues. Antibiotics have been one of the emerging...     

Effect of the carbon coating in Fe-C-TiO(2) photocatalyst on phenol decomposition under UV irradiation via photo-Fenton process

Fe-C-TiO(2) photocatalysts which contained the residue carbon (0.2-3.3 mass%) were prepared from a mixture of TiO(2) and FeC(2)O(4) through the heating at 673-1173 K in Ar. These photocatalysts did not show a high adsorption of phenol, but they were active in photo-Fenton reactions during decomposition of phenol under UV irradiation with addition of H(2)O(2). It was proved that Fe(2+) governed the photoactivity of Fe-C-TiO(2) photocatalysts, it decreased with heat-treatment temperature above 773 K. For comparison, Fe-TiO(2) photocatalyst was prepared by heating TiO(2) and FeC(2)O(4) at 823 K in air for 3h. Phenol decomposition was going much slower on Fe-TiO(2) photocatalyst in comparison with Fe-C-TiO(2), of which mechanism was different, on the former phenol was decomposed by the radical reaction, on the latter through a complex reaction with iron and intermediates of phenol decomposition. Therefore carbon-coating TiO(2) was found to be advantageous for mounting iron and its application for the phenol decomposition via photo-Fenton process.