Distribution Characteristics and Implication of n-alkanes in Soils and Plants in Alpine Meadow

Russian Journal of Ecology - The present study was conducted to investigate the n-alkane composition of typical alpine meadows. Plant and soil samples were collected and analyzed to characterize...     

原子荧光法测定水中汞的原子化条件研究

分别采用热原子化原子荧光法(热汞法)和冷原子化原子荧光法(冷汞法)测定水中汞,比较了两种方法的检出限、线性相关系数、准确度和精密度的差异。冷汞法和热汞法的检出限分别为0.003和0.01μg/L,标准曲线相关系数分别为0.999 9和0.999 7,加标回收率范围分别为102%~106%和106%~113%。结果表明,冷汞法比热汞法具有更低的检出限,灵敏度和准确度也略优于热汞法。对于冷汞法,提高负高压有利于提高方法的灵敏度、准确度,并具有更低的方法检出限。     

生物滞留池对屋面径流基本污染物的控制

快速的城市化导致不透水性下垫面急剧增加,进而加剧了径流污染,尤其是屋面径流污染。生物滞留池作为低影响开发理念的核心措施之一,对径流的净化效果显著。以屋面径流为控制对象,设计了3个生物滞留池用于探究不同土壤层厚度和不同进水方式对生物滞留池出水的影响。结果表明,实验收集的屋面径流污染严重,COD和TN为《地表水环境质量标准》(GB 3838—2002)劣Ⅴ类。经生物滞留池处理后发现,3个生物滞留池对悬浮物(SS)的去除效果较好,去除率为92.2%～98.7%,装填20cm土壤的表层进水生物滞留池较装填15cm土壤的生物滞留池出水污染物浓度低。装填20cm土壤的表层进水和侧向进水的生物滞留池对COD、TN和TP的去除能力总体相当,表层进水和侧向进水的生物滞留池对COD的去除率分别为91.7%、90.4%,对TN的去除率分别为93.8%、86.5%,对TP的去除率分别为70.1%和72.7%。     

K_2Cr_2O_7法和紫外分光光度法测定污水COD的对比研究

分别利用重铬酸钾法、重铬酸钾紫外分光光度法和紫外分光光度法测定污水的COD极差分别为2.43mg/L、1.19 mg/L和4.72 mg/L,RE%分别为0.84%、0.53%和1.36%,重铬酸钾紫外分光光度法和紫外分光光度法的线性范围分别在0~280 mg/L和0~400 mg/L.结果表明:重铬酸钾紫外分光光度法测定的准确度和精密度最高,简化了用标准溶液进行标定的步骤,缩短了实验时间;紫外分光光度法测定的结果准确度和精密度相对差一些,但是快速、操作简单、节省试剂,为广大环境工作者提供借鉴参考的实例。     

3种酚酸对中肋骨条藻生长的抑制作用

采用外源添加方式,通过监测藻细胞数量变化,分析了香草酸、对羟基苯甲酸和焦性没食子酸对中肋骨条藻生长的抑制作用。结果表明,在32~256mg/L浓度范围内,随着浓度的增大,3种酚酸对中肋骨条藻的抑制作用明显增强。当浓度为192mg/L时,3种酚酸对中肋骨条藻的生长抑制率超过50%。香草酸、对羟基苯甲酸和焦性没食子酸对中肋骨条藻的半抑制浓度分别为153mg/L、145mg/L和108.0mg/L。进一步,研究发现3种酚酸的半抑制浓度作用下,藻细胞内叶绿素、蛋白质和多糖含量明显低于对照组,胞外蛋白质和胞外多糖含量没有明显差异,但二者比值与对照组相比,有明显的增大趋势。3种酚酸显著降低了藻细胞SOD和POD比活力,尤其是显著降低了POD比活力,使其比活力降低为对照组的18%~39%。香草酸、对羟基苯甲酸和焦性没食子酸均致使藻细胞MDA含量明显升高,其数值增大为对照组的1.6、2.2和2.4倍。上述研究表明,3种酚酸通过影响某些主要生化成分的合成及其活性的影响,从而实现对中肋骨条藻生长的抑制作用。     

基于模糊数学方法的矿区空气质量综合评价

以泰和矿为研究背景,采用模糊综合评价的数学方法,分析了二氧化碳,二氧化氮、总悬浮物颗粒TSP、可吸入颗粒物PM₁₀和一氧化碳对矿区空气质量的影响,得出每个影响因素的权重和隶属度。研究发现,CO和TSP对矿区空气质量影响较大,NO₂较小,矿区空气质量综合评价属轻污染。     

消费电子产品生产过程中挥发性有机物(VOCs)排放特征的研究

选取塑胶零件、印刷线路板及主板3类消费电子产品部件为研究对象,利用活性炭管采样,样品溶剂解吸后采用GC/MS分析,获得了各排气筒及车间内VOCs含量水平与组分特征.通过计算排放量,得出了分物种VOCs排放系数.结果表明,塑胶零件生产线排气筒总挥发性有机物(TVOCs)浓度为48.01~115.05 mg·m-3,印刷线路板为6.08~11.36 mg·m-3,主板为29.81~30.21 mg·m-3.塑胶零件生产车间内TVOCs浓度为4.23~120.58 mg·m-3,印刷线路板为1.50~2.02 mg·m-3,主板为7.01~9.93 mg·m-3.环烷烃类、酯类、苯类为主要排放物质.对于不同产品生产线的排气筒及车间废气,浓度和物种均有很大差异;对于相同产品,浓度有差异但物种基本相同.按产品分类,共计算得出了36个分物种VOCs排放系数,其中,塑胶零件、印刷线路板及主板TVOCs排放系数分别为0.626 kg·kg-1涂料用量、0.123 kg·kg-1油墨用量、0.028 kg·kg-1印刷线路板用量.通过排放量计算结果分析,3种产品中,塑胶零件生产为VOCs主要排放源,车间内无组织排放为主要排放方式.     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

防弹材料保护套现状及性能测试分析

本文介绍了现代软质防弹材料发展历程及种类,简述了防弹材料防水布使用的作用与目的 ,研究比较了PU、PVC两种涂层的防水布材料的撕破强力、热合牢度、耐静水压、渗水等性能,最终得出使用PU涂层防水布可成为软质防弹材料保护外套的结论。     

含汞气田污水脱汞新技术

国内气田含汞污水处理主要采用硫化物沉淀法,辅以水处理絮凝剂增加沉淀效果。国外研究了一些含汞污水脱汞新工艺:沉淀一絮凝法、活性炭吸附法、离子交换法等,组合使用效果更佳,可脱除单质汞、离子汞和有机汞,脱汞深度可达1.0×10~(-9)mg/L级。借鉴国外含汞气田污水处理工艺,研究经济高效的脱汞工艺,减少汞污染,对我国含汞气田的合理开发具有重要的现实意义。