Co-development of an integrated assessment framework to evaluate the effectiveness and impact of selected nature-based water treatment technologies in Sri Lanka,The Philippines,and Vietnam

Water quality is a critical challenge in Asia in the context of growing industrialization, urbanization, and climate change. Nature-based solutions (NbS) could play an important role in reducing urban water pollution, while generating multiple co-benefits that could make cities more liveable and resilient. In this regard, a number of pilot and demonstration projects have been set up to explore their potential across cities in Asia. Their effectiveness and impacts, however, have not been adequately documented, thus how they can be sustained, replicated and up-scaled remain poorly understood. This study aims to contribute to addressing this challenge by co-developing an integrated assessment framework and employing it to understand how existing evaluations of NbS in the region can be improved. It focuses specifically on a set of nature-based solutions that have been employed for water treatment across six cities in Southeast Asia (two in each Sri Lanka, the Philippines, and Vietnam), namely, floating wetlands, constructed wetlands and maturation ponds. The study also suggests specific methodologies for capturing a set of core indicators considered relevant for assessing the effectiveness and capturing the multi-faceted impacts of the examined NbS.     

High photocatalytic removal of NO gas over SnO2 nanoparticles under solar light

Environmental Chemistry Letters - Tin oxide nanoparticles (SnO2 NPs) with a diameter less than 10 nm are usually used in waste water treatment via the photocatalytic reaction. However,...     

Runoff and sediment losses from 27 upland catchments in Southeast Asia: Impact of rapid land use changes and conservation practices

Rapid changes in upland farming systems in Southeast Asia generated predominantly by increased population pressure and ‘market forces’ have resulted in widespread land degradation that has been well documented at the plot scale. Yet, the links between agricultural activities in the uplands and downstream off-site effects remain largely unknown because of the difficulties in transferring results from plots to a larger scale. Many authors have thus pointed out the need for long-term catchment studies. The objective of this paper is to summarize the results obtained by the Management of Soil Erosion Consortium (MSEC) over the last 5 years from 27 catchments in five countries (Indonesia, Laos, Philippines, Thailand, and Vietnam). The purpose of the study was to assess the impacts of cultivation practices on annual runoff and erosion rates. Initial surveys in each catchment included topography, soils and land use. Monitoring included climatic, hydrologic and erosion (total sediment yield including bed load and suspended sediment load) data, land use and crop yields, and farmers’ income. In addition, new land management options were introduced through consultations with farmers and evaluated in terms of runoff and erosion. These included tree plantations, fruit trees, improved fallow with legumes, maize intercropped with legumes, planted fodder, native grass strips and agro-ecological practices (direct sowing and mulch-based conservation agriculture). Regressions analyses showed that runoff during the rainy season, and normalized runoff flow coefficient based on erosive rainfall during the rainy season (rainfall with intensity exceeding 25 mm h⁻¹) increase with the percentage of the catchment covered by maize. Both variables decrease with increasing soil depth, standard deviation of catchment slope (that reflects terrain roughness), and the percentages of the catchment covered by fallow (regular and improved), tree plantations and planted fodder. The best predictors of sediment yield were the surface percentages of maize, Job's tears, cassava and footpaths. The main conclusions generated from this study were: (i) soil erosion is predominantly influenced by land use rather than environmental characteristics not only at the plot scale but also at the catchment scale; (ii) slash-and-burn shifting cultivation with sufficiently long rotations (1 year of cultivation, 8 years of fallow) is too often unjustly blamed for degradation; (iii) in its place, continuous cropping of maize and cassava promotes high rates of soil erosion at the catchment scale; (iv) conservation technologies are efficient in reducing runoff and total sediment yield at the catchment scale; (v) the adoption of improved soil management technologies by upland farmers is not a function of the degree of intensification of their farming system and/or of their incomes. The results suggest that if expansion of maize and cassava into already degraded upland systems were to occur due to increased demand for biofuels, there is a risk of higher runoff and sediment generation. A failure to adopt appropriate land use management strategies will result in further rapid resource degradation with negative impacts to downstream communities.     

Validation of atmospheric aerosols parallel sampling in a multifold device

In this work, particulate matter was collected using an active sampling system consisting of a PM₁₀ (<10 μm) inlet coupled to a multifold device containing six channels, connected to a vacuum pump. Each channel was equipped with a filter holder fitted with adequately chosen filters. The system was fixed on a metallic structure, which was placed on the roof of the laboratory building, at the Faculty of Sciences, in Lisbon. Sampling took place under flow-controlled conditions. Aerosols were extracted from the filters with water, in defined conditions, and the water-soluble fraction was quantified by ion chromatography (IC) for the determination of inorganic anions (Cl^?, NO₃ ^? and SO₄ ^2?). Equivalent sampling through the various channels was validated. Validation was based on the metrological compatibility of the content results for the various filters. Ion masses are metrologically equivalent when their absolute difference is smaller than the respective expanded uncertainty. When this condition is verified, the studied multifold device produces equivalent samples.     

Effective adsorbent for arsenic removal: core/shell structural nano zero-valent iron/manganese oxide

Recently, nano zero-valent iron (nZVI) has emerged as an effective adsorbent for the removal of arsenic from aqueous solutions. However, its use in various applications has suffered from reactivity loss resulting in a decreased efficiency. Thus, the aim of this study was to develop an effective arsenic adsorbent as a core/shell structural nZVI/manganese oxide (or nZVI/Mn oxide) to minimize the reactivity loss of the nZVI. As the major result, the arsenic adsorption capacities of the nZVI/Mn oxide for As(V) and As(III) were approximately two and three times higher than that of the nZVI, respectively. In addition, the As(V) removal efficiency of the nZVI/Mn oxide was maintained through 4 cycles of regeneration whereas that of the nZVI was decreased significantly. The enhanced reactivity and reusability of the nZVI/Mn oxide can be successfully explained by the synergistic interaction of the nZVI core and manganese oxide shell, in which the manganese oxides participate in oxidation reactions with corroded Fe²⁺ and subsequently retard the release of aqueous iron providing additional surface sites for arsenic adsorption. In summary, this study reports the successful fabrication of a core/shell nZVI/Mn oxide as an effective adsorbent for the removal of arsenic from aqueous solutions.     

Glass–ceramic from mixtures of bottom ash and fly ash

Along with the gradually increasing yield of the residues, appropriate management and treatment of the residues have become an urgent environmental protection problem. This work investigated the preparation of a glass–ceramic from a mixture of bottom ash and fly ash by petrurgic method. The nucleation and crystallization kinetics of the new glass–ceramic can be obtained by melting the mixture of 80% bottom ash and 20% fly ash at 950 °C, which was then cooled in the furnace for 1 h. Major minerals forming in the glass–ceramics mainly are gehlenite (Ca₂Al₂SiO₇) & akermanite (Ca₂MgSiO₇) and wollastonite (CaSiO₃). In addition, regarding chemical/mechanical properties, the chemical resistance showing durability, and the leaching concentration of heavy metals confirmed the possibility of engineering and construction applications of the most superior glass–ceramic product. Finally, petrurgic method of a mixture of bottom ash and fly ash at 950 °C represents a simple, inexpensive, and energy saving method compared with the conventional heat treatment.     

Status of water use and potential of rainwater harvesting for replacing centralized supply system in remote mountainous areas: a case study

Environmental Science and Pollution Research - The failure of the centralized water supply system forced XY community to become more dependent on uncertain and unstable water sources. The results...