Isolation and Identification of Enterococci from Seawater Samples: Assessment of Their Resistance to Antibiotics and Heavy Metals

A hundred Enterococcus strains were isolated from seawater samples collected from coastal areas of Istanbul. Isolates were identified to the species level using standard biochemical tests specified by Facklam and Collins. The species distribution was as follows Enterococcus faecalis (96%), Enterococcus gallinarum (3%) and Enterococcus solitarius (1%). The resistance of bacteria to both heavy metals (zinc [Zn], iron [Fe], cadmium [Cd], chrome [Cr], cobalt [Co]) and antibiotics (ampicillin 10 μg [AP], penicillin G 10 Units [PG], gentamycin 10 μg [GM], streptomycin 10 μg [S], chloramphenicol 10 μg [C], erythromycin 15 μg [E], kanamycin 30 μg [K], amikacin 30 μg [AK], nalidixic acid 30 μg [NA], and vancomycin 30 μg [VA]) was evaluated. None of the strains was resistant to VA. It was found that among the 100 isolates, those that exhibit resistance to antibiotics, particularly NA, S and K, were also resistant all the heavy metals tested. To our knowledge this is the first report focusing on determination of resistance of environmental enterococci found in Istanbul against heavy metals and antibiotics. Thus, combined expressions of antibiotic and heavy metal resistance may help to reinforce ecological and epidemiological studies and to determine the role of these strains in antibiotic and heavy metal resistance dissemination.     

Effect of Fenton treatment on the aquatic toxicity of bisphenol A in different water matrices

Battery tests serve as integral tools to decide whether a treatment process is ecotoxicologically safe or not. In the present study, a battery of toxicity tests was employed to elucidate the toxicity of the potential endocrine-disrupting pollutant bisphenol A (BPA) and its advanced oxidation products. For this purpose, BPA was subjected to Fenton treatment in the growth medium of the test organisms employed as well as in real lake water. Treatment results indicated that BPA removals were fast and complete within less than a minute, whereas total organic carbon (TOC) removals were rather incomplete, speaking for the accumulation of refractory degradation products. The presence of chloride and/or natural organic matter influenced H₂O₂ consumption rates and the treatment performance of the Fenton’s reagent as well. The sensitivity of the selected test organisms for BPA and its Fenton treatment products in different water matrices was found in the following decreasing order: the freshwater microalgae (Pseudokirchneriella subcapitata) > the freshwater cladoceran (Daphnia magna) > marine photobacteria (Vibrio fischeri).     

Estimation of spatial distrubition of groundwater level and risky areas of seawater intrusion on the coastal region in Çarşamba Plain,Turkey, using different interpolation methods

Groundwater level plays a significant role in coastal plains. Heavy pumping and excessive use of near-coast groundwater can increase the intrusion of seawater into the aquifers. In the present study, groundwater levels were measured at 59 groundwater wells at different times during pre- and post-irrigation seasons (April and September of the year 2012) in Çar?amba Plain, Turkey. To select the best method, two deterministic interpolation methods (inverse distance weighing (IDW) with the weights of 1, 2, and 3 and radial basis function (RBF) with spline with tension (SPT) and completely regularized spline (CRS)) and two stochastic methods (ordinary kriging (OK) with spherical, exponential, and Gaussian variograms) and cokriging (COK)) were compared and then the best interpolation method was used to evaluate the spatial distribution of groundwater levels in different seasons and seasonal changes. A total of nine different techniques were tested. Also, risky areas of seawater intrusion in coastal area were determined using the best methods for two periods. The performance of these interpolation methods is evaluated by using a validation test method. Statistical indices of correlation (R ²), mean absolute error (MAE), and root-mean-square error (RMSE) were used to select and validate the best methods. Comparisons between predicted and observed values indicated RBF as the optimal method for groundwater level estimation in April and September. When the best method RBF and the worst method IDW were compared, significant differences were observed in the spatial distribution of groundwater. Results of the study also revealed that excessive groundwater withdrawals during the post-irrigation season dropped the groundwater levels up to 2.0 m in some sections. With regard to seawater intrusion, 9,103 ha of land area was determined to be highly risky and risky.     

UV-C-activated persulfate oxidation of a commercially important fungicide: case study with iprodione in pure water and simulated tertiary treated urban wastewater

Recently, the European Food Safety Authority (EFSA) has banned the use of iprodione (IPR), a common hydantoin fungicide and nematicide that was frequently used for the protective treatment of crops and vegetables. In the present study, the treatment of 2 mg/L (6.06 μM) aqueous IPR solution through ultraviolet-C (UV-C)-activated persulfate (PS) advanced oxidation process (UV-C/PS) was investigated. Baseline experiments conducted in distilled water (DW) indicated that complete IPR removal was achieved in 20 min with UV-C/PS treatment at an initial PS concentration of 0.03 mM at pH?=?6.2. IPR degradation was accompanied with rapid dechlorination (followed as Cl^? release) and PS consumption. UV-C/PS treatment was also effective in IPR mineralization; 78% dissolved organic carbon (DOC) was removed after 120-min UV-C/PS treatment (PS?=?0.30 mM) compared with UV-C at 0.5 W/L photolysis where no DOC removal occurred. LC analysis confirmed the formation of dichloroaniline, hydroquinone, and acetic and formic acids as the major aromatic and aliphatic degradation products of IPR during UV-C/PS treatment whereas only dichloroaniline was observed for UV-C photolysis under the same reaction conditions. IPR was also subjected to UV-C/PS treatment in simulated tertiary treated urban wastewater (SWW) to examine its oxidation performance and ecotoxicological behavior in a more complex aquatic environment. In SWW, IPR and DOC removal rates were inhibited and PS consumption rates decreased. The originally low acute toxicity (9% relative inhibition towards the photobacterium Vibrio fischeri) decreased to practically non-detectable levels (4%) during UV-C/PS treatment of IPR in SWW.

     

Effect of diurnal changes in VOC source strengths on performances of receptor models

Introduction

The effect of diurnal changes in strengths of volatile organic compound (VOC) sources on the performances of positive matrix factorization (PMF) and principal component analysis (PCA) was investigated using ambient measurement results that were taken during daytime and nighttime hours between March 24 and May 14, 2011, within Davutpasa Campus of Yildiz Technical University (Istanbul, Turkey).

Methods

Forty-five VOC species, ranging from C₅ to C₁₁ in volatility, were measured in the samples, 40 of which are included in the analyses. Ambient samples were grouped as daytime, nighttime, and all day datasets, and both PMF and PCA were applied to each dataset. A total of six source groups were extracted from each dataset: solvent use, general industrial paint use, gasoline and diesel vehicle exhausts, and biogenic as well as evaporative emissions. Estimated source contributions showed great diurnal variations.

Results

The results suggested that extraction of possible sources by PCA depends greatly on the number of samples and the strength of the sources, while PMF produced stable results regardless of number of samples and source strengths.

Conclusion

Although PMF was unable to resolve gasoline vehicle and evaporative emissions, it was found to be successful in explaining diurnal fluctuations in source strengths, while the performance of PCA depends on the strength of emission source.     

Determination of heavy metals and metals levels in five fish species from I??kl? Dam Lake and Karaca?ren Dam Lake (Turkey)

The concentrations of heavy metals and metals (Zn, Pb, Bi, Cd, Ni, Co, Fe, Mn, Mg, Cu, Cr, Ca, Sr, Na, Li, K) were measured in muscle of five species Cyprinus carpio (from I??kl? dam), Scardinius erythrophthalmus (from I??kl? dam), Tinca tinca (from I??kl? dam), C. carpio (from Karaca?ren dam), Carassius carassius (from Karaca?ren dam) caught from I??kl? and Karaca?ren. The highest metal was Na (466.95 μg/g) in C. carassius, while the lowest levels were Fe (0.37 μg/g) and Cu (0.37 μg/g) in C. carpio from I??kl? dam. The mean concentrations μg/g d.w. some of heavy metals in muscle of C. carpio (from I??kl? dam), S. erythrophthalmus (from I??kl? dam), T. tinca (from I??kl? dam), C. carpio (from Karaca?ren dam), C. carassius (from Karaca?ren dam) were as follows: Cd 2.00-2.10-1.95-2.06-2.27, Zn 4.36-2.64-13.13-13.33-24.47, Pb 1.65-1.24-1.90-2.37-2.41, Co 2.46-2.37-2.48-2.58-2.80, Mg 138.51-154.35-218.59-204.58-202.16, Fe 0.37-2.62-3.17-3.01-12.33, respectively.     

Effects of aqueous suspensions of titanium dioxide nanoparticles on Artemia salina: assessment of nanoparticle aggregation, accumulation, and toxicity

Aquatic stability and impact of titanium dioxide nanoparticles (TiO₂ NPs, 10–30 nm) were investigated using Artemia salina. Acute exposure was conducted on nauplii (larvae) and adults in seawater in a concentration range from 10 to 100 mg/L TiO₂ NPs for 24 and 96 h. Rapid aggregation occurred in all suspensions of TiO₂ NPs to form micrometer size particles. Yet, both nauplii and adults accumulated the aggregates significantly. Average TiO₂ content in nauplii ranged from 0.47 to 3.19 and from 1.29 to 4.43 mg/g in 24 and 96 h, respectively. Accumulation in adults was higher ranging from 2.30 to 4.19 and from 4.38 to 6.20 mg/g in 24 and 96 h, respectively. Phase contrast microscopy images revealed that Artemia were unable to excrete the particles. Thus, the TiO₂ aggregates filled inside the guts. No significant mortality or toxicity occurred within 24 h at any dose. Lipid peroxidation levels characterized with malondialdehyde concentrations were not statistically different from those of the controls (p?>?0.05). These results suggested that suspensions of the TiO₂ NPs were nontoxic to Artemia, most likely due to the formation of benign TiO₂ aggregates in water. In contrast, both mortality and lipid peroxidation increased in extended exposure to 96 h. Highest mortality occurred in 100 mg/L TiO₂ NP suspensions; 18 % for nauplii and 14 % for adults (LC₅₀?>?100 mg/L). These effects were attributed to the particle loading inside the guts leading to oxidative stress as a result of impaired food uptake for a long period of time.     

In vitro activity of antimicrobial agents against Legionella isolated from environmental water systems: first results from Turkey

We evaluated the in vitro activity of antimicrobial agents against Legionella obtained from hotel and hospital water systems in three different regions of Turkey. Sixty-five Legionella strains (Legionella pneumophila serogroup 6 [n?=?32], L. pneumophila serogroup 1 [n?=?27], L. pneumophila serogroup 3 [n?=?2], and Legionella spp. [n?=?4]) were tested against levofloxacin, ciprofloxacin, clarithromycin, azithromycin, and rifampicin. The minimum inhibitory concentration (MIC) values of each antimicrobial agent for these strains was determined by the microdilution method using buffered yeast extract medium supplemented with 0.1% ketoglutarate broth. L. pneumophila ATCC 33152, Staphylococcus aureus ATCC 29213, and Escherichia coli ATCC 25922 were used as controls. Minimum inhibitory concentration values were in the following ranges: clarithromycin 0.001–0.5 mg/L, azithromycin 0.001–0.5 mg/L, levofloxacin 0.001–0.5 mg/L, ciprofloxacin 0.001–0.125 mg/L, and rifampicin 0.001– 0.5 mg/L. The MIC₉₀ for rifampicin, levofloxacin, ciprofloxacin, azithromycin, and clarithromycin were 0.015, 0.125, 0.06, 0.125, and 0.06 mg/L, respectively. To the best of our knowledge, this is the first study to determine in vitro activities of antimicrobial agents against Legionella species in Turkey. Rifampicin had the lowest MIC₉₀ value. It would seem that azithromycin and clarithromycin exhibit good activity as well as levofloxacin and ciprofloxacin against Legionella isolated from environmental water systems in Turkey.     

Combined chemical and biological oxidation of penicillin formulation effluent

Antibiotic formulation effluent is well known for its important contribution to environmental pollution due to its fluctuating and recalcitrant nature. In the present study, the chemical treatability of penicillin formulation effluent (average filtered COD(o)=830 mg/l; average soluble COD(o)=615 mg/l; pH(o)=6.9) bearing the active substances penicillin Amoxicillin Trihydrate (C(16)H(19)N(3)O(5)S.3H(2)O) and the beta-lactamase inhibitor Potassium Clavulanate (C(8)H(8)KNO(5)) has been investigated. For this purpose, the penicillin formulation effluent was subjected to ozonation (applied ozone dose=2500 mg/(lxh)) at varying pH (2.5-12.0) and O(3)+H(2)O(2) (perozonation) at different initial H(2)O(2) concentrations (=2-40 mM) and pH 10.5. According to the experimental results, the overall Chemical Oxygen Demand (COD) removal efficiency varied between 10 and 56% for ozonation and 30% (no H(2)O(2)) and 83% (20 mM H(2)O(2)) for the O(3)+H(2)O(2) process. The addition of H(2)O(2) improved the COD removal rates considerably even at the lowest studied H(2)O(2) concentration. An optimum H(2)O(2) concentration of 20 mM existed at which the highest COD removal efficiency and abatement kinetics were obtained. The ozone absorption rate ranged between 53% (ozonation) and 68% (perozonation). An ozone input of 800 mg/l in 20 min was sufficient to achieve the highest BOD(5)/COD (biodegradability) ratio (=0.45) and BOD(5) value (109 mg/l) for the pre-treated penicillin formulation effluent. After the establishment of optimum ozonation and perozonation conditions, mixtures of synthetic domestic wastewater+raw, ozonated and perozonated penicillin formulation effluent were subjected to biological activated sludge treatment at a food-to-microorganisms (F/M) ratio of 0.23 mg COD/(mg MLSSxd), using a consortium of acclimated microorganisms. COD removal efficiencies of the activated sludge process were 71, 81 and 72% for pharmaceutical wastewater containing synthetic domestic wastewater mixed with either raw, ozonated or perozonated formulation effluent, respectively. The ultimate COD value obtained after 24-h biotreatment of the synthetic domestic wastewater+pre-ozonated formulation effluent mixture was around 100 mg/l instead of 180 mg/l which was the final COD obtained for the wastewater mixture containing raw formulation effluent, indicating that pre-ozonation at least partially removed the non-biodegradable COD fraction of the formulation effluent.     

The effect of pre-ozonation on the biocompatibility of reactive dye hydrolysates

Pre-ozonation of 14 different reactive dyestuff hydrolysates at alkaline pH was investigated to assess possible relationships between ozone transfer efficiency, first order decolourization kinetics, release of initially complexed heavy metals and relative changes in the biodegradability of the partially oxidized dye waste samples. Biocompatibility of the raw (untreated) and ozonated dye hydrolysates was comparatively tracked through specific oxygen uptake rate measurements from which the respirometric inhibition of biological activated sludge imparted by raw and ozonated reactive dye wastewater with respect to synthetic domestic wastewater was determined. It could be demonstrated that preliminary ozonation of reactive azo dyes increases their biological compatibility more significantly than formazan copper complex, copper complex azo and phythalocyanine dyes as a consequence of heavy metal release associated with the cleavage of associated chromophoric groupings right at the initial stages of pre-ozonation.