Design and evaluation of an inlet conditioner to dry particles for real-time particle sizers

Real-time particle sizers provide rapid information about atmospheric particles, particularly peak exposures, which may be important in the development of adverse health outcomes. However, these instruments are subject to erroneous readings in high-humidity environments when compared with measurements from filter-based, federal reference method (FRM) samplers. Laboratory tests were conducted to evaluate the ability of three inlet conditioners to dry aerosol prior to entering a real-time particle sizer for measuring coarse aerosols (Model 3321 Aerodynamic Particle Sizer, APS) under simulated highly humid conditions. Two 30 day field studies in Birmingham, AL, USA were conducted to compare the response of two APSs operated with and without an inlet conditioner to that measured with FRM samplers. In field studies, the correlation of PM(10-2.5) derived from the APS and that measured with the FRM was substantially stronger with an inlet conditioner applied (r2 ranged from 0.91 to 0.99) than with no conditioner (r2 = 0.61). Laboratory experiments confirmed the ability of the heater and desiccant conditioner to remove particle-borne moisture. In field tests, water was found associated with particles across the sizing range of the APS (0.5 microm to 20 microm) when relative humidity was high in Birmingham. Certain types of inlet conditioners may substantially improve the correlation between particulate mass concentration derived from real-time particle sizers and filter-based samplers in humid conditions.     

High-sensitivity direct analysis of aflatoxins in peanuts and cereal matrices by ultra-performance liquid chromatography with fluorescence detection involving a large volume flow cell

This paper reports a sensitive and cost effective method of analysis for aflatoxins B1, B2, G1 and G2. The sample preparation method was primarily optimised in peanuts, followed by its validation in a range of peanut-processed products and cereal (rice, corn, millets) matrices. Peanut slurry [12.5 g peanut + 12.5 mL water] was extracted with methanol: water (8:2, 100 mL), cleaned through an immunoaffinity column and thereafter measured directly by ultra-performance liquid chromatography-fluorescence (UPLC-FLD) detection, within a chromatographic runtime of 5 minutes. The use of a large volume flow cell in the FLD nullified the requirement of any post-column derivatisation and provided the lowest ever reported limits of quantification of 0.025 for B1 and G1 and 0.01 μg/kg for B2 and G2. The single laboratory validation of the method provided acceptable selectivity, linearity, recovery and precision for reliable quantifications in all the test matrices as well as demonstrated compliance with the EC 401/2006 guidelines for analytical quality control of aflatoxins in foodstuffs.     

Coping with the ‘Indian summer’: unique nesting cycle and nest architecture of the paper wasp,Polistes wattii

The Science of Nature - Leaf-cutting ants are highly successful herbivores in the Neotropics. They forage large amounts of fresh plant material to nourish a symbiotic fungus that sustains the...     

Screening of antibiotic residues in fresh milk of Kathmandu Valley,Nepal

The prevalence of two groups of antibiotics; namely penicillin and sulfonamides was studied in fresh milk available in Kathmandu Valley of Nepal. The milk samples (n = 140) were collected from three different sources; individual farmers, cottage dairies and organized dairies of Kathmandu valley. Qualitative and semi-quantitative analysis with rapid screening kits revealed that 23% samples were positive for antibiotic residues in the fresh milk for penicillin and sulfonamide groups (1–256 µg/kg). High performance liquid chromatography (HPLC) analyses detected 81% samples positive for amoxicillin (68–802 µg/kg), 41% for sulfadimethoxine (31–69 µg/kg), 27% for penicillin G (13–353 µg/kg), and 12% for ampicillin (0.5–92 µg/kg). Due to the precision and accuracy of liquid chromatography method, it detected more positive samples and consequently presented higher prevalence than the rapid screening kits. The antibiotic residues were found above the maximum residue limits that presented serious threat to consumer health and raised a serious concern regarding the implementation and monitoring of international regulations in developing countries.     

Bioccumulation and toxicity of Cu and Cd in Vallisneria spiralis (L.)

Accumulation of Cu and Cd by Vallisneria spiralis was studied under laboratory conditions. Plants showed ability to reduce 5 µg ml^–1 Cu background concentration to below 0.05 µg ml^–1 (m.p.l., WHO 1985) within 48 h. The Cd concentration of 1.0 µg ml^–1 was reduced to below m.p.l. (0.005 µg ml^–1) in 168 h. Cysteine synthesis was more under Cd stress condition. Both the metals were toxic to the plants at higher concentrations; more in the case of Cd.NBRI Rsearch Publication No. 417 (N.S.).     

Synthesis and characterisation of transition metal sulphide-loaded fly ash–based mesoporous EU-12 photocatalysts for degradation of rhodamine B

Transition metal sulphide-loaded fly ash–based EU-12 photocatalysts were synthesized by sono-hydrothermal method followed by ion exchange. The composites were characterized by XRD, FESEM, DSC-TGA, Raman spectroscopy, and BET surface area analysis. The XRD results imply 76.39% crystallinity of EU-12 and morphological studies by FESEM, and TEM revealed the shape and size of EU-12, i.e. rod-shaped with size ranging from 5 to 200 nm. Band gap of all synthesized photocatalysts were found to be?≤?3.44 eV. The photoactivities of the photocatalysts were examined by degrading rhodamine B (RhB). The results indicated that metal sulphide/EU-12 composite had the strong photoactivity under visible light compared to dark environment. Furthermore, the efficiency of photocatalysts was determined in terms of degradation efficiency towards RhB which was found to be maximum of 98.62% for 0.2 M CdS/EU-12 at 2 gL^?1 of catalyst dosage and 10 ppm of dye concentration within 3 h under visible light source of 200 W.

     

Load of Heavy Metals in the Airborne Dust Particulates of an Urban City of Central India

The geographical and temporal distribution patterns of airborne dust particulates have been studied in different representative areas of Raipur City. Dust fall samples from different sites were collected and some selected toxic metals namely Cr, Mn, Fe, Ni, Cu, Zn, Sb and Pb in them were determined by AAS. Total annual flux of 11.7, 541.4, 2751.0, 14.2, 9.8, 90.9, 17.6, and 17.7 kg km(-2) y(-1) were measured for Cr, Mn, Fe, Ni, Cu, Zn, Sb, and Pb respectively. The occurrence of metal concentration were generally in the order industrial > heavy traffic > commercial > residential area in Raipur city. The results of analysis show the existence of toxic metal concentration in the order Fe > Mn > Zn > Pb approximately Sb > Ni > Cr > Cu in Raipur city. These large levels of metal pollutants have also been correlated with some meteorological parameters like temperature, relative humidity and wind velocity, and strong positive correlations have been observed.     

Correcting common misconceptions to inspire conservation action in urban environments

Despite repeated calls to action, proposals for urban conservation are often met with surprise or scepticism. There remains a pervasive narrative in policy, practice, and the public psyche that urban environments, although useful for engaging people with nature or providing ecosystem services, are of little conservation value. We argue that the tendency to overlook the conservation value of urban environments stems from misconceptions about the ability of native species to persist within cities and towns and that this, in turn, hinders effective conservation action. However, recent scientific evidence shows that these assumptions do not always hold. Although it is generally true that increasing the size, quality, and connectivity of habitat patches will improve the probability that a species can persist, the inverse is not that small, degraded, or fragmented habitats found in urban environments are worthless. In light of these findings we propose updated messages that guide and inspire researchers, practitioners, and decision makers to undertake conservation action in urban environments: consider small spaces, recognize unconventional habitats, test creative solutions, and use science to minimize the impacts of future urban development.