Modeling the long-term transport and accumulation of radionuclides in the landscape for derivation of dose conversion factors

To evaluate the radiological impact of potential releases to the biosphere from a geological repository for spent nuclear fuel, it is necessary to assess the long-term dynamics of the distribution of radionuclides in the environment. In this paper, we propose an approach for making prognoses of the distribution and fluxes of radionuclides released from the geosphere, in discharges of contaminated groundwater, to an evolving landscape. The biosphere changes during the temperate part (spanning approximately 20,000 years) of an interglacial period are handled by building biosphere models for the projected succession of situations. Radionuclide transport in the landscape is modeled dynamically with a series of interconnected radioecological models of those ecosystem types (sea, lake, running water, mire, agricultural land and forest) that occur at present, and are projected to occur in the future, in a candidate area for a geological repository in Sweden. The transformation between ecosystems is modeled as discrete events occurring every thousand years by substituting one model by another. Examples of predictions of the radionuclide distribution in the landscape are presented for several scenarios with discharge locations varying in time and space. The article also outlines an approach for estimating the exposure of man resulting from all possible reasonable uses of a potentially contaminated landscape, which was used for derivation of Landscape Dose Factors.     

Occurrence of UV filter compounds from sunscreens in surface waters: regional mass balance in two Swiss lakes

Consumer care products often contain UV filters, organic compounds which absorb ultraviolet light. These compounds may enter surface waters directly (when released from the skin during swimming and bathing) or indirectly via wastewater treatment plants (when released during showering or washed from textiles). Predicted and measured UV filter concentrations were compared in a regional mass balance study for two Swiss lakes: Lake Zurich, a typical midland lake which is also an important drinking water resource, and Hüttnersee, a small bathing lake. Both lakes are extensively used for recreational activities and considerable direct input of UV filters is thus expected. This input was estimated from the number of visitors at swimming areas around the lakes and a survey of the usage of sunscreen products among these visitors. Possible additional indirect input via wastewater treatment plants was not considered in this study. The quantitatively most important UV filters, as indicated by the survey data, ethylhexyl methoxycinnamate, octocrylene, 4-methylbenzylidene camphor, butyl methoxydibenzoylmethane, and benzophenone-3, all lipophilic compounds, were selected for analysis by gas chromatography-mass spectrometry. Concentrations of individual UV filters in water from Lake Zurich were low, ranging from <2 ng l(-1) (detection limit) to 29 ng l(-1), and somewhat higher at Hüttnersee, ranging from <2 to 125 ng l(-1), with the highest concentrations found in summer, consistent with direct inputs to the lakes during this time. The concentrations were clearly lower than predicted from input estimates based on the surveys. This may be in part due to (i) an overestimation of these inputs (e.g. less than the 50% wash-off of UV filters assumed to occur during swimming), and (ii) some removal of these compounds from the lakes by degradation and/or sorption/sedimentation. UV filters were also detected in semipermeable membrane devices (SPMDs) deployed at Lake Zurich and Greifensee, another midland lake, at concentrations of 80-950 ng SPMD(-1), confirming the presence of the compounds in surface waters and indicating a certain potential for bioaccumulation. SPMD-derived water concentrations were in the range of 1-10 ng l(-1) and thus corresponded well with those determined in water directly. No UV filters were detected above blank levels in SPMDs deployed at a remote mountain lake used for background measurements.     

Dioxin concentrations in sediments of the Baltic Sea--a survey of existing data

Recent survey results for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs, dioxins) in Baltic Sea sediments from Finland, Sweden and Denmark were merged with previously published Baltic Sea data. Regional distribution of concentration levels, differences in congener patterns, and temporal changes in sediment profiles were examined. One of the main objectives was to study if any major point sources for different PCDD/F congeners could be identified on a regional scale, based on sediment records. The survey confirmed the impact of chlorophenol production derived highly chlorinated PCDF-congeners on the total toxicity in sediments in the Gulf of Finland near the Kymijoki river estuary. Signatures of other point sources or combined point sources pertinent to specific industry branches or particular production processes (such as pulp bleaching, vinyl chloride production, thermal processes) may be discerned. However, the findings did not support any of the known point sources significantly influencing those congeners that are most abundant in Baltic herring and salmon. Instead, regional distributions in the Baltic Sea indicate that atmospheric deposition may act as a major source for those congeners and especially for 2,3,4,7,8-PeCDF. There were clear indications of declines in levels in sediment in some areas, but generally the levels of highly chlorinated PCDD/Fs on the northern coast of the Gulf of Finland were still high when compared with other areas of the Baltic Sea. Major areas with data gaps cover the south-eastern and eastern coastal regions of the Baltic Proper and the southern Gulf of Finland.     

Model of the Long-Term Transport and Accumulation of Radionuclides in Future Landscapes

Assessments of radiological impacts on humans and other biota from potential releases to the biosphere from a deep geologic repository for spent nuclear fuel are associated with several challenges. Releases, if any, will likely occur in a far future and to an environment that will have experienced substantial transformations. Such releases would occur over very long periods during which environmental conditions will vary continuously due to climate change and ecosystem succession. Assessments of radiological impacts must therefore be based on simulations using models that can describe the transport and accumulation of radionuclides for a large variety of environmental conditions. In this paper we describe such a model and show examples of its application in a safety assessment, taking into account results from sensitivity and uncertainty analyses of the model predictions.     

The use of semipermeable membrane devices as passive samplers to determine persistent organic compounds in indoor air

In the study reported here semipermeable membrane devices (SPMDs) were used to sample 28 PAHs and 19 PCBs in the gas phase in 15 single-family houses located in an area where domestic wood burning is widespread. Eight of the households used wood burning appliances whereas the others used other systems for residential heating. Most of the studied compounds were found in the houses: the PAHs at levels that were similar to or slightly higher than published SPMD-sampled levels for background or urban sites in Sweden, and the PCBs at levels that were somewhat lower than those recently found in both indoor and outdoor urban locations. A principal component analysis revealed that wood-burning heating systems may contribute to PAHs in indoor air. The sources may be emissions indoors or penetration from outdoors. The convenience of SPMD technology facilitates its use for semi-quantitative screening and monitoring of various persistent organic compounds indoors in dwellings and working environments.     

Sustainable innovation journeys: exploring the dynamics of firm practices as part of transitions to more sustainable food and farming

Deep structural and sustained change is necessary to tackle contemporary environmental challenges. How such change emerges and can be governed has been explored through the notion of sustainable innovation journeys. To date research had conceptualised such journeys as transitions to more sustainable socio-technical systems, e.g. mobility, shelter, food and farming. However, there is a paucity of how innovation proceeds in firms as part of sustainable innovation journeys. This paper begins to address this gap in knowledge. A longitudinal case study was completed of a medium-sized food-processing firm in the UK. Qualitative data were collected using ethnographic methods such as participant observation. Drawing on practice theory, a conceptual framework was developed which enabled us to explore and make sense of the firm's sustainable innovation journey conceptualised as practices. Findings show that we can usefully treat a firm as a flow of practices that either resist or otherwise accommodate new practices deemed more sustainable.     

Evidence-Based Knowledge Versus Negotiated Indicators for Assessment of Ecological Sustainability: The Swedish Forest Stewardship Council Standard as a Case Study

Assessing ecological sustainability involves monitoring of indicators and comparison of their states with performance targets that are deemed sustainable. First, a normative model was developed centered on evidence-based knowledge about (a) forest composition, structure, and function at multiple scales, and (b) performance targets derived by quantifying the habitat amount in naturally dynamic forests, and as required for presence of populations of specialized focal species. Second, we compared the Forest Stewardship Council (FSC) certification standards’ ecological indicators from 1998 and 2010 in Sweden to the normative model using a Specific, Measurable, Accurate, Realistic, and Timebound (SMART) indicator approach. Indicator variables and targets for riparian and aquatic ecosystems were clearly under-represented compared to terrestrial ones. FSC’s ecological indicators expanded over time from composition and structure towards function, and from finer to coarser spatial scales. However, SMART indicators were few. Moreover, they poorly reflected quantitative evidence-based knowledge, a consequence of the fact that forest certification mirrors the outcome of a complex social negotiation process.     

National Inventory of Landscapes in Sweden (NILS)��scope, design, and experiences from establishing a multiscale biodiversity monitoring system

The landscape-level and multiscale biodiversity monitoring program National Inventory of Landscapes in Sweden (NILS) was launched in 2003. NILS is conducted as a sample-based stratified inventory that acquires data across several spatial scales, which is accomplished by combining aerial photo interpretation with field inventory. A total of 631 sample units are distributed across the land base of Sweden, of which 20% are surveyed each year. By 2007 NILS completed the first 5-year inventory phase. As the reinventory in the second 5-year phase (2008?C2012) proceeds, experiences and insights accumulate and reflections are made on the setup and accomplishment of the monitoring scheme. In this article, the emphasis is placed on background, scope, objectives, design, and experiences of the NILS program. The main objective to collect data for and perform analyses of natural landscape changes, degree of anthropogenic impact, prerequisites for natural biological diversity and ecological processes at landscape scale. Different environmental conditions that can have direct or indirect effects on biological diversity are monitored. The program provides data for national and international policy and offers an infrastructure for other monitoring program and research projects. NILS has attracted significant national and international interest during its relatively short time of existence; the number of stakeholders and cooperation partners steadily increases. This is constructive and strengthens the incentive for the multiscale monitoring approach.