Contamination status and potential release of trace metals in a mangrove forest sediment in Ho Chi Minh City,Vietnam

Can Gio district is located in the coastal area of Ho Chi Minh City, southern Vietnam. Discharge of wastewater from Ho Chi Minh City and neighboring provinces to the rivers of Can Gio has led to concerns about the accumulation of trace metals (As, Cu, Cr, Ni, Pb, and Zn) in the coastal sediments. The main objective of this study was to assess the distribution of As, Cu, Cr, Ni, Pb, and Zn in surface and core sediments and to evaluate the contamination status in relation to local background values, as well as the potential release of these selected trace metals from sediments to the water environment. Sediment characteristization, including determination of fine fraction, pH, organic matter, and major elements (Al, Fe, Ca, K, Mg, and S), was carried out to investigate which parameters affect the trace metal enrichment. Fine fraction and Al contents were found to be the controlling proxies affecting the distribution of trace metals while other sediment characteristics did not show any clear influence on trace metals’ distribution. Although As concentrations in the sediments were much higher compared to its reference value in other areas, the enrichment factor based on local background values suggests minor contamination of this element as well as for Cr, Cu, and Pb. Risk assessment suggested a medium to very high risk of Mn, Zn, and Ni under acidification. Of importance is also that trace metals in sediments were not easily mobilized by organic complexation based on their low extractabilities by ammonium-EDTA extraction.

     

Potentially toxic elements in bottom ash from hazardous waste incinerators: an integrated approach to assess the potential release in relation to solid-phase characteristics

Journal of Material Cycles and Waste Management - Understanding the chemical and mineralogical characteristics of bottom ash (BA) containing Potentially Toxic Elements (PTEs, e.g., As, Cd, Co, Cu,...     

Classification of alluvial soils according to their potential environmental risk: a case study for Belgian catchments

Alluvial soils may represent important sinks of contaminants as a result of the deposition of contaminated sediments along the river by overbank flooding or after dredging. Because of the erosion of alluvial deposits or the release of contaminants from sediments, alluvial soils can also be a source of contamination. In this paper, a risk assessment for contaminated (alluvial) soils is presented. The approach, mainly based on physico-chemical soil characteristics, single extractions and leaching tests, is illustrated by means of a case study from four Belgian catchments. The extractions and leaching tests that were used have been validated by European testing programs and can provide valuable information for classifying the potential environmental risks of soils. Irrespective of the location, pH, organic carbon content and 'mobilisable' metal concentrations were the most important factors explaining 'mobile' metal concentrations in the alluvial soils. Additionally, the data of the physico-chemical soil characterization, extractions and leaching tests were combined with local and regional factors to classify the alluvial soils in different categories according to their actual and potential risk for the environment.     

Persistent organochlorine pollutants in human serum of 50-65 years old women in the Flanders Environmental and Health Study (FLEHS). Part 2: Correlations among PCBs,PCDD/PCDFs and the use of predictive markers

In 1999, the FLEHS was set by the Flemish Ministry of Health, Belgium to assess pollutant concentrations and related health effect biomarkers in humans living in Flanders. Concentrations of selected organochlorine pesticides, polychlorinated biphenyls (PCB) and polychlorinated dibenzo-p-dioxins (PCDD) and furans (PCDF) were measured by gas chromatography-mass spectrometry and Chemical-Activated LUciferase gene eXpression (CALUX) bioassay in 47 serum pools of 200 women between 50 and 65 years living in two areas of Flanders. Correlation between TEQ values of different groups of compounds were computed in these pool results and it was found that total toxic equivalencies (TEQs) correlated well with the values of the groups of contributing compounds: mono-ortho PCBs (r = 0.77), non-ortho PCBs (r = 0.65) and PCDD/Fs (r = 0.88). The total TEQ was lower correlated to the CALUX-TEQ (r = 0.57). When calculating associations between those classes of compounds in the two studied regions separately, they were all higher correlated in the urban area compared to the more rural region. High correlation coefficients (r > 0.80) were also calculated between individual compounds and groups of compounds. It was suggested that in this studied background-exposed population, some compounds could be good predictors for a group: e.g. PCB 153 for indicator and total PCBs, PCB 118 for total PCB TEQ, PCB 156 for mono-ortho PCB-TEQs and total TEQ, 2,3,4,7,8-P5CDF for PCDD/F TEQs and total TEQs. This means that in pooled serum samples correlations between persistent organochlorine compounds are as strong as for individual POP measurements observed in earlier studies.     

Climate change collaboration among natural resource management agencies: lessons learned from two US regions

It has been argued that regional collaboration can facilitate adaptation to climate change impacts through integrated planning and management. In an attempt to understand the underlying institutional factors that either support or contest this assumption, this paper explores the institutional factors influencing adaptation to climate change at the regional scale, where multiple public land and natural resource management jurisdictions are involved. Insights from two mid-western US case studies reveal that several challenges to collaboration persist and prevent fully integrative multi-jurisdictional adaptation planning at a regional scale. We propose that some of these challenges, such as lack of adequate time, funding and communication channels, be reframed as opportunities to build interdependence, identify issue-linkages and collaboratively explore the nature and extent of organisational trade-offs with respect to regional climate change adaptation efforts. Such a reframing can better facilitate multi-jurisdictional adaptation planning and management of shared biophysical resources generally while simultaneously enhancing organisational capacity to mitigate negative effects and take advantage of potentially favourable future conditions in an era characterised by rapid climate change.     

Empirical relationship between precision and ultra-trace concentrations of PCDD/Fs and dioxin-like PCBs in biological matrices

Dioxin analysis in food and feed can be characterized as an analytical application where very high accuracy is required at very low levels of contamination. Gas chromatography (GC) in combination with 13C-label isotope dilution (ID) high resolution mass spectrometry (HRMS) is the reference congener-specific technique characterized by pronounced selectivity, precision and trueness at parts-per-trillion (ppt) and sub-parts-per-trillion (sub-ppt) levels. The quality of the analytical data produced routinely by a laboratory should be adequate for its intended purpose, i.e., one will seek a compromise between the cost and time needed and the consequences of incorrect decisions due to erroneous results. The requirements for reproducibility are usually dependent on the analyte concentrations and have been expressed in various empirical functions. While Horwitz or modified functions are widely useful for many purposes, it would be difficult to expect these functions to cover every analytical problem. This study reports on precision characteristics achieved by the GC-ID-HRMS reference method for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in food and feed in two interlaboratory method-performance studies among expert laboratories with long-standing experience in this field. Striking linear functions in log scale between reproducibility standard deviation and congener's level over a concentration range of 10(-8)-10(-14)g per g fresh weight are observed. The data fit very well to a Horwitz-type function of the form sR=0.153c0.904, where sR and c are dimensionless mass ratios expressed in pg g(-1) on fresh weight, regardless of the nature of the toxic congeners, food and feed matrices, or sample preparation methods. We demonstrate that the proposed function is suitable for use as a fitness-for-purpose criterion for proficiency assessment in interlaboratory comparisons on dioxins and related compounds in food.     

Influence of ripening on pHstat leaching behaviour of heavy metals from dredged sediments

The influence of oxidation and ripening on the kinetics of heavy metal release from anoxic sediments was investigated by means of porewater analysis and pH(stat) leaching tests. During simulated land disposal of an anoxic river sediment, a considerable heavy metal (Cd, Zn and Ni) release into the porewater was observed after 25 days of exposure of the sediment to the air. The release kinetics of Cd and Zn during pH(stat) leaching indicated that their release was related to the oxidation of Cd- and Zn-sulfides. It was not completely clear whether the release of Ni was due to the oxidation of Ni-sulfides or to the introduction of H(+)(generated by the oxidation of sulfides or introduced by titration). The release of Cu seemed to be explained by the oxidation of both Fe-sulfides and Cu-sulfides. As such, pH(stat) experiments provided an indirect way to assess the mineralogy of the anoxic sediment. During ripening of the sediment, the release rate of Zn and Cd in pH(stat) leaching tests increased. For Ni, however, a similar release pattern was observed in the anoxic sediment and in the ripened sediments. Two weeks' drying at 100 degrees C resulted in an increase in the leachability of Cu. Nevertheless, at pH 4 and 6, the thermally treated sediment displayed a slower leaching of Cd and Zn than the ripened sediment. Although thermal treatment is often used to simulate ageing in soils, it cannot be used to simulate ripening of anoxic sediments.     

The evaluation of dioxin and dioxin-like contaminants in selected food samples obtained from the Belgian market: comparison of TEQ measurements obtained through the CALUX bioassay with congener specific chemical analyses

A limited number of different foods were analysed for dioxin-like compounds by the CALUX bioassay which is an in vitro luciferase reporter gene assay measuring chemical activation of the aryl hydrocarbon receptor. Sixty-two milk samples were obtained from a surveillance campaign, 34 meat samples and 34 fishery products were purchased from the Belgian market. Bio-analytical and chemo-analytical dioxin toxicity equivalents (TEQ) values of the same milk samples were compared. Spearman's Rank correlation coefficients of 0.72, 0.67, 0.73 were obtained respectively between CALUX-TEQ and PCDD/F-TEQ, DL-PCB-TEQ and PCDD/F+DL-PCB-TEQ. The bioassay limit of detection was 0.1 pg TEQ from 1 g animal lipid, the limit of quantification was 0.4 pg TEQ. The repeatability of the CALUX bioassay (variability of butter fat samples analysed in the same run) showed a coefficient of variation (CV) of 10%, intra laboratory reproducibility based on independent runs of the same butter fat samples showed more variation (CV of 26% for samples above 2 pg TEQ/g lipid). All milk samples with a chemical TEQ value above the current limit value in Belgium showed an elevated CALUX-TEQ concentration, above 6 pg TEQ/g lipid. No false negative results were obtained. Based on the good correlation between CALUX-TEQ and chemically measured TEQ levels, the CALUX bioassay can be recommended as a screening tool for routine measurement of potentially toxic PHAHs in milk samples. Chemical analyses could then largely be restricted to positive samples, in order to identify the nature and to quantify the concentration of the chemicals that give the positive signal. Meat samples showed lower CALUX-TEQ values per gram lipid compared to fish samples. The fish samples showed a wider range of CALUX-TEQ values than the meat samples.     

Large-scale diversity and biogeography of benthic copepods in European waters

A large-scale database concerning benthic copepods from the Arctic, Baltic Sea, North Sea, British Isles, Adriatic Sea and Crete was compiled to assess species richness, biodiversity, communities, ecological range size and biogeographical patterns. The Adriatic showed the highest evenness and the most species-rich communities. Assemblages from the North Sea, British Isles, Baltic and Crete had a lower evenness. The British Isles were characterised by impoverished communities. The ecological specificity of copepod species showed two diverging trends: higher specificity of species in more diverse assemblages was observed in the Adriatic, North Sea and Baltic. A uniformly high species specificity disregarding sample diversity was found on Crete and in the British Isles. Benthic copepod communities showed distinct patterns that clearly fit the predefined geographical regions. Communities were distinguishable and β-diversity was found to be high around Europe, indicating a high species turnover on the scale of this investigation. The British Isles and the North Sea were found to be faunistic links to the Baltic and the Arctic.