A hybrid model for human factor analysis in process accidents: FBN-HFACS

Human factors are the largest contributing factors to unsafe operation of the chemical process systems. Conventional methods of human factor assessment are often static, unable to deal with data and model uncertainty, and to consider independencies among failure modes. To overcome the above limitations, this paper presents a hybrid dynamic human factor model considering Human Factor Analysis and Classification System (HFACS), intuitionistic fuzzy set theory, and Bayesian network. The model is tested on accident scenarios which have occurred in a hot tapping operation of a natural gas pipeline. The results demonstrate that poor occupational safety training, failure to implement risk management principles, and ignoring reporting unsafe conditions were the factors that contributed most failures causing accident. The potential risk-based safety measures for preventing similar accidents are discussed. The application of the model confirms its robustness in estimating impact rate (degree) of human factor induced failures, consideration of the conditional dependency, and a dynamic and flexible modelling structure.     

Reflections on the use of Bayesian belief networks for adaptive management

A broad range of tools are available for integrated water resource management (IWRM). In the EU research project NeWater, a hypothesis exists that IWRM cannot be realised unless current management regimes undergo a transition toward adaptive management (AM). This includes a structured process of learning, dealing with complexity, uncertainty etc. We assume that it is no longer enough for managers and tool researchers to understand the complexity and uncertainty of the outer natural system-the environment. It is just as important, to understand what goes on in the complex and uncertain participatory processes between the water managers, different stakeholders, authorities and researchers when a specific tool and process is used for environmental management. The paper revisits a case study carried out 2001-2004 where the tool Bayesian networks (BNs) was tested for groundwater management with full stakeholder involvement. With the participation of two researchers (the authors) and two water managers previously involved in the case study, a qualitative interview was prepared and carried out in June 2006. The aim of this ex-post evaluation was to capture and explore the water managers' experience with Bayesian belief networks when used for integrated and adaptive water management and provide a narrative approach for tool enhancement.     

Comparison of models of simazine transport and fate in the subsurface environment in a citrus farm

Contamination of groundwater by agrochemicals is now widely recognized as an extremely important environmental problem. Modern agricultural practices involve the combined use of irrigation with the application of large amounts of agrochemicals to maximize crop yield. Due to flood irrigation and natural runoff, agricultural activities might generate soil, surface water and groundwater contamination problems and leaching of pesticides. Modeling of the transport and fate of pesticides, such as simazine, may help understand the long-term potential risk to the subsurface environment. This paper illustrates a comparative study via the use of three different pesticide transport simulation models and the applicability of those models in determining the groundwater vulnerability to pesticides contamination in a citrus orchard located at the Lower Rio Grande Valley (LRGV). The three models used in the study are the pesticide root zone model-3 (PRZM-3), the pesticide analytical model (PESTAN) and integrated pesticide transport modeling (IPTM). The concentration values obtained from all three models are in agreement, and they show a decreasing trend from the surface through the vadose zone. The problem is how to use this information and, specifically, how to combine the testimony of a number of experts into a single useful judgment. With the aid of the fuzzy multiattribute decision making method, PRZM-3 is deemed as the most promising one for such precision farming applications.     

A Sensitivity Analysis of an Integrated Modelling Approach to Assess the Risk of Wind-borne Spread of Foot-and-mouth Disease Virus from Infected Premises

The sensitivity of an integrated model to assess the potential for wind-borne spread of foot-and-mouth disease (FMD) to variations in key parameters controlling different physical and biological processes was evaluated. The estimated number of farms at risk is sensitive to the virus strain used and the accompanying effective contact rate. The C Noville strain increased the estimated number of exposed farms ranked as high and medium risk of being infected by a factor of 5, compared to the baseline, based on the O UKG 2001 strain. The inclusion of a model for biological ageing of the virus can also have a significant effect on the concentration patterns arising from transport and dispersion of the virus. Its inclusion has the practical advantage of markedly reducing the time required for the calculations. The estimated number of farms affected by exposure to high and medium virus concentrations is not grossly sensitive to attenuation caused by temperature or relative humidity effects. Changes in susceptibility to infection, as determined by the parameter θ in the exposure-risk model, does not change the configuration of the virus plumes, but it does change the distribution of farms at risk by risk category. These findings suggest that a good understanding of characteristics (excretion rates from infected animals, susceptibility of different species to infection, virus survival, etc.) of the virus strain involved in an FMD outbreak is necessary to provide a reliable assessment of the risk of wind-borne spread. In the event of an incursion of FMD, provision for laboratory studies on the virus will be an essential component of the disease response and should be factored into contingency plans.

Particulate matter exchange between atmosphere and roads surfaces in urban areas

The deposition and the re-suspension of particulate matter (PM) in urban areas are the key processes that contribute not only to stormwater pollution, but also to air pollution. However, investigation of the deposition and the re-suspension of PM is challenging because of the difficulties in distinguishing between the resuspended and the deposited PM. This study created two Bayesian Networks (BN) models to explore the deposition and the re-suspension of PM as well as the important influential factors. The outcomes of BN modelling revealed that deposition and re-suspension of PM10 occurred under both, high-traffic and low-traffic conditions, and the re-suspension of PM2.5 occurred under low-traffic conditions. The deposition of PM10 under low-volume traffic condition is 1.6 times higher than under high-volume traffic condition, which is attributed to the decrease in PM10 caused by relatively higher turbulence under high-volume traffic conditions. PM10 is more easily resuspended from road surfaces compared to PM2.5 as the particles which larger than the thickness of the laminar airflow over the road surface are more easily removed from road surfaces. The increase in wind speed contributes to the increase in PM build-up by transporting particulates from roadside areas to the road surfaces and the airborne PM2.5 and PM10 increases with the increase in relative humidity. The study outcomes provide a step improvement in the understanding of the transfer processes of PM2.5 and PM10 between atmosphere and urban road surfaces, which in turn will contribute to the effective design of mitigation measures for urban stormwater and air pollution.     

基于SVR的长江经济带水环境承载力评价

基于DPSIRM模型构建区域水环境承载力评价指标体系,并基于SVR模型构建了区域水环境承载力评价模型,利用交叉验证法对SVR模型参数进行优化选择,进一步提高模型预测精度.运用该模型研究了长江经济带2009~2018年的水环境承载力演变趋势及空间差异,结果表明：长江经济带水环境承载力等级整体呈现升高趋势,其中上游城市群承载等级由II级（超载）提升到了IV级（弱可承载）;中游城市群承载等级由II级（超载）提升到了IV级（弱可承载）;下游长三角区域承载等级由I级（重超载）提升到了IV级（弱可承载）.将评价结果与熵权-TOPSIS法的评价结果相比较,相同率达到91.7%,说明SVR模型评价区域水环境承载力可行,评价结果可靠.以下游区域为例,分别对其6个子系统的承载力进行剖析,并运用单因素轮换OAT法对各子系统内的评价指标进行敏感性分析,便于决策者识别指标敏感性.     

化工区环境突发事件的数学预测及应对措施

通过对某市化工区环境污染物概况的调查,建立了污染风险模型,并且根据模型获得的结果确定了区域内的主要污染物。在此基础上提出了化工区环境突发事件的应对措施,为今后的应急监测提供的理论保证。     

ASM1中废水和污泥组分浓度的测定方法研究

对呼吸计量法应用于校准ASM1作了简明的阐述。在呼吸速率与模型组分关系的基础上,介绍了ASM1中废水与污泥各组分浓度的测定方法,并指出模型组分细化的意义。     

关于室内装修有害气体烘焙排风稀释技术数值研究

依据实测数据,应用数值计算手法,对烘焙排风稀释技术不同工况下总挥发性有机化合物的排除量、烘焙排风稀释阶段室内空气中总挥发性有机化合物的浓度变化进行计算并讨论烘焙温度、换气次数对去除效果的影响。     

托盘式烟气脱硫喷淋塔空塔冷态流场数值模拟

以600MW机组多孔合金托盘喷淋塔为研究对象,利用国际流行的商用CFD(ComputationalFluidDynamics)软件Fluent及其前处理软件Gambit对烟气脱硫立式喷淋空塔的流场进行二维数值模拟。计算中选用模型作为计算模型,用SIMPLE算法进行计算。计算结果表明,喷淋塔的烟气入口角度以及多孔合金托盘的安装高度对塔内流场分布有一定的影响,安装托盘后气速明显均匀化,斜切式烟气进口流场分布较直进式均匀,还获得了合适的托盘安装高度。