Research on transesterification parameters for producing plant sterols with supercritical methanol

The supercritical fluid method, regarded as a type of individual production process in the course of preparing plant sterols, has become a promising technology, which possesses advantages of high conversion rate without any pretreatment and need of a catalyst. This study examined the reaction process of the deodorizer distillate (DOD), which mainly included the direct transesterification of DOD to convert into free sterols. The effects of the ratio of methanol to DOD, reaction temperature and time on transesterification were studied. Furthermore, the interactions between different factors were also assessed using the response surface methodology. The optimal conditions obtained were as follows: reaction temperature 553 K, reaction time 80 min, and CH₃OH: DOD = 25:1 (mass ratio). Under these conditions, 36.42% sterol concentration was obtained, which is significantly higher in comparison with the initial sterols’ concentration in raw material (22.45%).     

A real-time simulating non-isothermal mathematical model for the passive feed direct methanol fuel cell

In order to understand the complex transport phenomena in a passive direct methanol fuel cell (DMFC), a theoretical model is essential. The analytical model provides a computationally efficient framework with a clear physical meaning. For this, a non-isothermal, analytical model for the passive DMFC has been developed in this study. The model considers the coupled heat and mass transport along with electrochemical reactions. The model is successfully validated with the experimental data. The model accurately describes the various species transport phenomena including methanol crossover and water crossover, heat transport phenomena, and efficiencies related to the passive DMFC. It suggests that the maximum real efficiency can be achieved by running the cell at low methanol feed concentration and moderate current density. The model also accurately predicts the effect of various operating and geometrical parameters on the cell performance such as methanol feed concentration, surrounding temperature, and polymer electrolyte membrane thickness. The model predictions are in accordance with the findings of the other researchers. The model is rapidly implementable and can be used in real-time simulation and control of the passive DMFC. This comprehensive model can be used for diagnostic purpose as well.     

MTBE装置潜在危险性分析及物料泄漏扩散后果模拟研究

MTBE装置处理的物料（混合C4、甲醇）具有易燃易爆性,若发生物料泄漏,将导致装置发生火灾爆炸。为了确保装置安全平稳、长周期运行,基于MTBE装置工艺技术特点,全面系统分析了装置的潜在危险性,总结出导致装置发生火灾爆炸事故的主要因素-物料泄漏;在此基础上,采用挪威DNV公司的SAFETI定量风险评价软件,建立混合C4、甲醇泄漏扩散模型,对物料泄漏导致的主要事故类型（喷射火、池火等）进行模拟,得出泄漏扩散引发火灾爆炸事故的危害范围。结果表明：该模拟研究能够反映出泄漏扩散过程和破坏范围,取得了较真实的事故影响范围曲线图,可以为设计人员更加详细了解MTBE装置发生事故的危害性及企业加强重点部位监控、制定防范措施、编制事故应急预案提供重要参考依据。     

大力推广清洁能源——甲醇(M15)汽油

随着国际原油价格持续高位运行,实施能源的多元化战略已是当前世界各国政府做出的重要抉择.我国是一个缺油少气、相对富煤的国家,合理、高效、节能、安全的发展煤基替代燃料是我国能源发展的惟一出路,甲醇汽油是车用燃料替代,是新能源的重要组成部分.本文对此进行了论述.     

喷射时刻对柴油甲醇组合燃烧发动机颗粒物排放的影响

为了进一步减少甲醇掺烧后的柴油机颗粒物排放,在一台由增压中冷的高压共轨柴油机改造成的柴油甲醇组合燃烧(DMCC—diesel/methanol compound combustion)发动机上详细研究了柴油喷射时刻对两种燃料共燃时的颗粒物生成及其排放的影响.试验工况选择重型柴油机常用的A50工况.试验结果表明,当柴油在上止点后喷射时,颗粒物排放的数量浓度随着甲醇替代率的增加而减少,当上止点前喷射时,颗粒物的数量浓度先减少后增加.随着喷射时刻的提前,颗粒中超细颗粒所占比例增大.随着喷射时刻的推迟,甲醇替代率降低颗粒物质量浓度的作用增强,同时甲醇替代率降低颗粒物几何平均直径的作用减弱.     

好氧+物化组合工艺处理甲醇废水的工程应用研究

通过邳州某二甲醚生产企业的工程实例，介绍了好氧＋物化组合工艺在处理甲醇废水中的应用。该工艺具有处理设施运行稳定、处理效果好的优点，系统出水水质能够达到国家循环冷却水系统补充水水质标准的排放要求，可对二甲醚生产行业的废水处理有一定参考价值。     

Direct methanol fuel cell bubble removal mechanism using magnetic actuation

This article develops a direct methanol fuel cell (DMFC) with a magnet-actuated bubble removal mechanism. A micro-DC motor is used to control the bubble removal mechanism. The lower magnetic device is operated to extrude a Polydimethylsiloxane (PDMS) runner to compress the liquid fuel in the anode flow channel, forcing the CO₂ bubbles in the runner to flow toward the outlet end. The bubble retention in the anode flow channel is thereby improved, enhancing the cell performance. The proposed mechanism stability and performance and Polymethylmethacrylate (PMMA) runner are also discussed.     

正交法优化顶空—毛细管气相色谱法测定水中甲醇的实验条件

用顶空进样-毛细管气相色谱法测定水中甲醇，实验结果受到顶空条件影响因素较多。本文使用正交试验方法对顶空进样的加盐量、炉温、恒温时间等5个因素进行了优化，确定了顶空进样气相色谱法测定水中甲醇的最佳操作条件，配合DB-624石英毛细管柱和氢火焰离子化检测器，检出限可达到0．33mg/L。用本方法选择实验条件更加科学合理，测定结果更加可靠。     

光催化氧化处理低浓度含醇废水实验

室内实验了TiO2紫外光催化氧化处理废水中的低浓度甲醇。通过对TiO2催化剂活性及添加方式、溶液pH、紫外光强与催化剂加量等参数优化,在TiO2加入浓度为300mg/L和120 W紫外灯照射条件下,对6.8L甲醇浓度为2.77%的低浓度含醇废水持续处理70min后,废水中的甲醇去除率可达98.31%。该实验为进一步处理低浓度含醇废水提供了方法依据。     

SO2对Ag/Al2O3催化剂上CH3OH还原NO性能的影响

用溶胶-凝胶混合法制备了Ag负载量为5%的Ag/A1₂O₃催化剂.研究了富氧条件下,SO₂对CH₃OH在催化剂上还原NO性能的影响.结果表明,反应气不含SO₂和H₂O时,NO还原活性温度较低,有显著量N₂O生成,这被归因为反应过程中,部分氧化态Ag被还原为金属Ag.添加SO₂或同时添加SO₂和H_{2相似文献}