废旧电池掩埋处理方法初探

以分别种植小叶黄杨和八角金盘的2块试验土地与1块贫瘠裸露土地作为对照,试验植物吸收处理废旧电池的重金属污染的掩埋方法。文章介绍了将废旧电池内部的糊状物分别掩埋在小叶黄杨,八角金盘和贫瘠裸露土地3块试验土中,选用电池内部含量较多的 Zn 等重金属元素为跟踪元素,经一定时间后分析土壤中重金属元素的残留量。测定结果发现,小叶黄杨能很好地吸收掩埋入土的重金属元素,而八角金盘则对重金属没有明显的吸收作用。     

Material flow analysis of lubricating oil use in California

Petroleum lubricating oils, used throughout the economy, are distinct among petroleum products in their capacity to be recovered and recycled at the end of their useful life. Used lubricating oil is regulated at the state and federal level because of concerns about environmental impacts arising from improper disposal, although rates of recovery are not known. We present a material flow analysis of lubricants through California's economy in the years 2007–2012. We introduce a novel technique for computing aggregate waste generation from a collection of hazardous waste manifest records, and apply it in order to determine a recovery rate for used oil and to estimate the quantity of oil managed informally in the state. The records also offer a detailed view of the fate of used oils after they are recovered. We find that around 62% of lubricants are recoverable at end of life, of which 70–80% is being recovered. This rate shows a slight downward trend. If the trend is accurate, measures should be taken to improve the performance of the used oil management system. Policy opportunities exist to reduce the quantity of oil managed informally through improving access to responsible used oil management methods. These include increasing the collection of used oil from industrial sources as well as “do it yourself” oil changes, expanding in-state reprocessing capacity, and promoting increased out-of-state reprocessing of used oil. Our methods introduce new possibilities to make use of direct observation in material flow analysis, potentially improving data availability and quality and increasing the relevance of material flow methods in policy applications.     

Valorisation of used cooking oil sludge by codigestion with swine manure

The addition of lipid wastes to the digestion of swine manure was studied as a means of increasing biogas production. Lipid waste was obtained from a biodiesel plant where used cooking oil is the feedstock. Digestion of this co-substrate was proposed as a way of valorising residual streams from the process of biodiesel production and to integrate the digestion process into the biorefinery concept.Batch digestion tests were performed at different co-digesting proportions obtaining as a result an increase in biogas production with the increase in the amount of co-substrate added to the mixture. Semi-continuous digestion was studied at a 7% (w/w) mass fraction of total solids. Co-digestion was successful at a hydraulic retention time (HRT) of 50 d but a decrease to 30 d resulted in a decrease in specific gas production and accumulation of volatile and long chain fatty acids. The CH₄ yield obtained was 326 ± 46 l/kg VS_feed at an HRT of 50 d, while this value was reduced to 274 ± 43 l/kg VS_feed when evaluated at an HRT of 30 d. However these values were higher than the one obtained under batch conditions (266 ± 40 l/kg VS_feed), thus indicating the need of acclimation to the co-substrate. Despite of operating at low organic loading rate (OLR), measurements from respirometry assays of digestate samples (at an HRT of 50 d) suggested that the effluent could not be directly applied to the soil as fertiliser and might have a negative effect over soil or crops.     

Effects of activated carbon types and service life on removal of endocrine disrupting chemicals: amitrol, nonylphenol, and bisphenol-A

Removal performances of endocrine disrupting chemicals (EDC) such as amitrol, nonylphenol, and bisphenol-A were evaluated in this study using granular activated carbon (GAC) adsorption. This study found that GAC adsorption was effective in removal of EDCs with high K_ow value. Nonylphenol and bisphenol-A were effectively adsorbed onto all carbons (including the used carbons) tested in this study. As indicated by K_ow value, nonylphenol was more effectively adsorbed than bisphenol-A. The coal-based carbon was found more effective than other carbons in the adsorption of nonylphenol and bisphenol-A due to its larger pore volume. The adsorption capacity reduced with the operation year, and the extent of the reduction was different depending upon the carbon type and the operation year. Amitrol was effectively removed by biological degradation, but was poorly adsorbed. Since the microbes residing at the used carbons already accustomed to amitrol, the used carbons removed amitrol better than the virgin carbons. Although the coal-based carbon showed the best removal performance of amitrol, GAC adsorption could not be recommended for amitrol removal because considerable portion of incoming amitrol (9–87%) passed through GAC adsorption column. According to this study, pore volume mainly influenced the adsorption capacity, but the surface charge was also important due to electrical interaction. The adsorption parameters for nonylphenol and bisphenol-A provided by this study could be valuable when GAC adsorption was considered to handle an accidental spill of nonylphenol and bisphenol-A.     

秦皇岛市废矿物油资源化初探

在分析秦皇岛市废矿物油的产生和排放现状的基础上，指出废矿物油资源化是解决近岸海域油污染的最佳条件，并提出了一些可操作性的废矿物油资源化对策。     

控制在用车排放恶化的有效措施

针对我国在用车排放比较严重的现状，我们认为：短期内易于实现，花费不高，不用对现有车辆作重大技术变动的有效措施是完善在用车Ｉ／Ｍ计划和进行在用国的加速淘汰工作。而且，对于用率和高污染车辆，完善的Ｉ／Ｍ计划也是更有效控制机动车排放污染所必需的。     

Life cycle assessment of an industrial symbiosis based on energy recovery from dried sludge and used oil

Recovering energy from wastes is a useful strategy for integrated waste and energy management in an eco-industrial park (EIP) and gives promising reduction of wastes, total energy consumption and operation cost. In Jinqiao EIP, Pudong New Area, Shanghai, an industrial symbiosis, based on the energy recovery from municipal sewage sludge and re-refined oil, was proposed in the central heat-supplying company of Jinqiao EIP. It is expected that hot off-gas or part of the steam from the central heat-supplying company could be used for sludge drying and used oil re-refining while the dried sludge and refined oil can be partial substitution for fossil fuel. For the purpose of assessing the environmental performance of this industrial symbiosis, life cycle assessment (LCA) was used and different scenarios were set up in this study to evaluate the Global warming Potential (GWP), Acidification Potential (AP), Eutrophication Potential (EP), Human toxicity air (HTA) and Total Environmental Impact Potential (TEIP) of the system. Results indicate that when the substitute ratio of coal by sludge is 14%, the proposed industrial symbiosis has the least environmental impact. Compared with the current situation (sludge is landfilled), co-combustion of dried sludge and re-refined oil with coal at optimal scale will release less CO₂, CH₄, NO_x, N₂O and CO, but more SO₂, H₂S, NH₃, HCl, polycyclic aromatic hydrocarbons (PAHs), non-methane volatile organic compounds (NMVOC) and heavy metals.     

活性白土对餐饮业废油脂脱色工艺的探索

选用活性白土对餐饮业废油脂进行脱色研究,对脱色率的影响因素进行了讨论。摸索出活性白土的最佳脱色条件：活性白土用量5％;初始脱色温度60C;终止脱色温度120C;脱色时间25min。     

我国废旧轮胎的再循环利用

总结了我国废旧轮胎的再循环利用技术及利用途径 ,指出我国废旧轮胎的回收利用应以生产胶粉或其他方式为主 ,再生胶将逐渐减少     

Virgin and recycled engine oil differentiation: a spectroscopic study

As a result of the changes that occur during their use, used engine oils tend to differ in chemical and physical composition from a virgin oil. In general recycled oils have: much higher water and sediment levels than virgin oil; relatively higher concentrations of organic compounds (oxidation products); and relatively higher levels of metals such as Fe, Cd, Cr, Pb, etc. Therefore, the aim of this work was to investigate, assess and to observe, by means of the physical and the chemical properties of the oils, atomic absorption (AA), inductive couple plasma (ICP) and Fourier transform infrared (FTIR) analyses the extent of the differences occurring between the virgin and recycled oil. In important part of this work was also the development of analytical techniques based on the use of FTIR spectroscopy; in relation to the rapid analysis of lubricants; in particular for the differentiation of virgin and recycled oil. The results obtained were expected to be useful for differentiation purposes, providing information on whether the metal concentrations and oxidation products could be an appropriate feature for differentiating a particular oil sample from the others. This work is categorized into a two-step procedure. Firstly, an evaluation of a typical FTIR spectrum of an engine oil sample (mono- and multigrade) is presented. The broad feature centered at 1716 cm(-1) is due to the presence of carbonyl containing degradation products of oil. A band observed at 1732, 1169, 1154 and 1270 cm(-1) assigned to the polymethacrylate stretching vibrations, allows the determination of viscosity modifier and pour point depressant additives. The observed differences in the specific spectral bands (1732, 1169, 1154 and 1270 and 1716 cm(-1)) are investigated and discussed. Secondly, an analytical technique for the measurement of the levels of the wear metals is also applied.