Al_2O_3光催化降解染料性能研究

液相加热法制备了Al2O3作为光催化剂,研究了不同光源、光照时间、催化剂用量和溶液酸度等条件对常见有机染料光催化降解性能影响。结果表明,用太阳光作为光源照射3h,50mL染料溶液中加入Al2O3 30mg,溶液pH8～10,孔雀石绿,酚藏花红,甲基紫等染料脱色率达93%以上。将使用过的Al2O3经过简单处理,孔雀石绿溶液脱色率仍达到94.1%,催化性能稳定,可以重复利用。通过紫外可见光谱分析,表明染料分子在催化剂和光照条件下发生了降解。     

无机高分子铝盐絮凝剂的研究进展

对近年来无机高分子复合铝盐絮凝剂的研究进展及其在水处理中的应用进行了综合评述，并对今后无机高分子复合铝盐絮凝剂的发展方向提出了建议。     

Effects of Ca2+ ions antagonistic to Al3+ ions poisoningin root growth , cell division and nucleolusin root tip cells of Allium cepa

The effects of different aluminium chloride concentrations together with varying calciumchloride concentrations on root growth, cell division and nucleoli in root tip cells of Allium cepa werestudied. The concentrations used for aluminium chloride were 10^-4, 10^-3 and 10^-2 mol/L ; and for calcium chloride were 10^-5 , 10^-4 , 10^-3 and 10^-2 mol/L, respectively. The results showed that after thetreatments with 10^-2 to 10^-3 mol/L Al³⁺ , root growth was severely inhibited , a large nurnber of thecells with c-mitosis were induced and the nucleolar material was extruded from the nucleus into the cytoplasm. However , the treatments with 10^-2 to 10^-3 mol/L of Al³⁺ together with 10^-2)to 10^-5 mol/LCa²⁺ suggested that Ca²⁺ gave the obviously protective effects against Al³⁺ poisoning in root growth.cell division and nucleoli of the root tip cells in A. cepa. The possible mechanism of these protective effects of Ca²⁺) is also briefly discussed.     

大型构件防腐喷砂(涂)车间通风除尘设计

考虑到大型构件喷砂（涂）车间铝粉尘污染的特点以及构件进出空间的限制，比较了各种类型的除尘器，选择了最合理的通风除尘方案，进行了通风除尘系统的设计。该设计方案实施后，除尘效果显著。     

一氯二乙基铝装置危险源辨识及预防措施

一氯二乙基铝装置为甲类火灾危险装置。通过对一氯二乙基铝装置工艺流程及各单元工艺特点的详细分析,危险源的辨识从物料危险性、工艺过程危险性、工艺操作危险性等角度展开,从而确定出该装置的重大风险因素。在对一氯二乙基铝装置危险源辨识和分析的基础上,对各工艺单元提出相应的控制措施,预防事故发生。     

Accumulation of Fluoride and Aluminium Related to Different Varieties of Tea Plant

Samples of young shoot, mature leaf, twig, root, and litter were taken from four recently bred varieties Zhe-nong 113, Zhe-nong 121, Zi-sun, and Bi-feng grown at two tea plantations located at Zhejiang and Jiangsu Provinces. The results showed that the concentrations of F and Al in tea plants were significantly different among the four varieties. It is therefore possible that F and Al concentrations in tea products can be reduced through variety selection. The results also revealed that old leaves would be the major contribution to the high levels of F and Al in brick tea since it is produced mainly for old leaves. Therefore, in order to eliminate the hazard of over-exposure to F and Al derived from tea, younger shoot should be used for making tea products while mature leaves should be avoided.     

电解铝生产含氟工业烟气湿法吸收治理中试装置设计实现

本文通过对国内外近几年有关电解铝含氟化氢工业尾气净化处理大量的参考文献的分析研究及国内外电解铝生产企业在尾气治理方面的技术应用和尾气净化装置运行状况的调研,结合自己的专业特长和工程经验,建立一套有关电解铝含氟化氢尾气在处理、净化氟化氢方面的技术方案,设计制作一套湿法氟化氢吸收中试装置,从工艺方案优化设计、安全运行、设备设计及选材、自动控制、建立相关的副产物检测方法和后续产物的综合利用等方面进行了研究和探讨。     

CuSnZr三元催化剂应用于NTP强化催化脱硫过程的特性

为高效地在低温下处理大量低浓度电解铝烟气, 采用浸渍法制备了Sn Zr型金属氧化物并添加Cu作为助剂的催化剂, 并首次测试了它在低温等离子体(NTP)技术上的脱硫效果, 结果表明负载了20wt% Cu老化温度为40℃的催化剂表现出最佳的脱硫性能.并对强化之后的催化剂进行了表征, 与新鲜的催化剂对比, X射线衍射分析(XRD)结果表明放电对催化剂晶型基本不产生影响; 扫描电子显微镜(SEM), 氮吸附和脱吸(BET)表明放电会使催化剂的吸附脱附能力与孔道结构有较大提升; X射线光电子光谱(XPS)也表明放电会使催化剂表面元素价态变化, 从而使其氧化还原性能改变, 反应路径发生偏向; 催化剂性能理论计算表明铜含量的上升会导致催化剂能带结构改变, 更好利用于激发气体.     

污泥热解残渣制备聚合氯化铝的实验研究＊

含铝污泥热解或焚烧残渣制备聚合氯化铝的研究,有利于实现污水处理过程投加的铝盐絮凝药剂的回收与高效循环利用,减少污染物排放和资源消耗。针对辽河油田欢三联稠油污水处理污泥的热解残渣具有较高铝含量的特点,开展采用盐酸进行铝溶出及制备聚合氯化铝的实验研究。结果表明:焙烧温度为700～750℃,焙烧时间控制在1h即可。将经过焙烧活化的残渣在常温下进行酸溶,酸溶时间为2～5h,选用25%～30%盐酸,氧化铝与盐酸的摩尔比为1∶1.0～1∶1.2为宜。将溶出的铝溶液制备聚合氯化铝,在常温下采用CaO粉末来调节pH值为3.5,聚合反应时间为1d,即可得聚合氯化铝溶液。     

青海桥头铝电有限公司炭素企业安全管理经验

从安全管理网络的建立、定期安全活动、事故预想的开展、安全目标责任制的落实、安全素质教育的推行、安全文化建设、营造安全氛围等8个方面,对青海桥头铝电有限公司安全管理工作经验进行了介绍.