2016—2017年武汉市城区大气PM2.5污染特征及来源解析

利用2016年1月至2017年9月湖北省环境监测中心站大气复合污染自动监测站的在线监测数据，对武汉市城区PM_2.5的污染特征及主要来源进行解析。结果表明，武汉市城区PM_2.5质量浓度呈现出明显的季节差异，季节变化规律为冬季>春季>秋季>夏季。水溶性离子的主要成分SO₄^2-、NO₃^-和NH₄⁺占总离子质量浓度的82.0%。PM_2.5中阴离子相对阳离子较为亏损，颗粒整体呈碱性。夏季气态污染物的氧化程度较高且SO₂较NO₂氧化程度高。后向轨迹分析结果表明，区域传输是武汉市PM_2.5的一个重要来源，在4个典型重污染阶段，武汉市分别受到局地、东北、西北及西南方向气团传输的影响。PMF模型解析出武汉市PM_2.5五大主要来源及平均贡献率：扬尘22.0%、机动车排放27.7%、二次气溶胶21.6%、重油燃烧14.9%和生物质燃烧13.8%。     

地下水中污染物的迁移传输及排泄通量研究

以辽宁某化工污染场地为研究对象,结合场地调查结果,应用地下水模型系统软件(GMS)中的MODFLOW和RT3D模型,建立了地下水中污染物的数值模型,探讨其迁移传输及排泄通量。根据模拟结果,地下水中苯、二氯苯和三氯苯的污染羽约在20年后达到动态平衡,污染羽不再随时间变化,污染物的自然衰减速率与污染源释放速率达到平衡。排泄通量估算表明:地下水向河流排泄的量在20年时达到稳定,地下水中苯、二氯苯和三氯苯向河流的排泄通量分别为每天180 g、6 100 g和5.5 g。由于污染物会导致污染生态环境和健康风险,建议从控制污染源、实施污染源区修复和切断迁移传输途径等多种措施控制风险。     

不同离子对黑土胶体在土壤中运移的影响

黑土样品采自于黑龙江海伦市,提取胶体并对其主要理化性质进行定性定量表征,通过淋滤实验研究胶体在土柱中的运移特征以及不同离子及其强度对胶体运移的影响。结果显示:所提取胶体粒径与理论计算基本吻合,粒径主要分布在2~5μm;当pH由4上升到9时,胶体的zeta电位则由-26.43mV降低到-34.52mV;红外光谱显示胶体颗粒的有机机团主要为-OH、CH-、C=O、多糖;X射线衍射表明其主要矿物组成是石英(56.9%)。不同离子及其强度对胶体的在土壤中的运移有较为明显的影响,当pH由4增加到9时,k值由6.020×10-4降低至3.858×10-4,Ca2+、K+、Na+当离子强度由0.5mmol/L变化到0.001mmol/L时,k值分别由6.087×10-4降低至4.024×10-4、5.518×10-4降低至3.818×10-4、5.401×10-4降低至4.109×10-4。     

典型沙尘回流天气过程对北京市空气质量影响的特征分析

利用不同方位监测数据和气象资料,结合后向轨迹模型和激光雷达观测结果,对2011年3月18—21日北京市空气污染过程的天气形势、沙尘输送路径、污染物浓度的变化特征进行了分析.结果表明,这次污染过程主要是由于沙尘在上游沙源地起沙后先直接输送穿过北京,然后停留在渤海湾和朝鲜半岛区域,在渤海弱高压系统作用下,沙尘又回流至北京所致,其中,沙尘回流直接造成北京市空气质量达到重度污染天气.在沙尘回流影响过程中,PM10浓度呈现青龙山-北京市区-八达岭逐步升高的变化特征,国控站点PM10小时浓度持续16 h超过350μg·m-3,最大值达到571μg·m-3.SO2、NO2与PM10的小时浓度表现为同步变化规律,沙尘回流影响时,除了沙尘粒子外,周边地区的人为排放也是一个重要因素.     

城市交通大气污染物与温室气体协同控制效应评价

针对乌鲁木齐城市交通领域12项减排措施开展协同控制效应评估,构建空气污染物与温室气体协同减排当量(APeq)指标进行减排效果归一化,识别措施是否具有协同减排效果,并进一步计算单位APeq减排成本,从成本有效性角度对各项减排措施进行排序.研究结果表明,出租车、私家车油改气以及纯电动轿车替代汽油轿车3项措施不具有协同控制效应;而提高尾气排放标准、天然气公交替代柴油公交、提升小客车燃油经济性、油品升级、淘汰黄标车、发展轨道交通、引入快速公交等措施可以实现局地大气污染物与温室气体的协同减排.费用-效果分析表明,提高小客车燃油经济性的单位APeq减排成本最低,具有良好的成本有效性;而发展轨道交通虽然单位APeq减排成本较高,但总体减排效果较好.     

纳米Ag粒子在我国主要类型土壤中的迁移转化过程与环境效应

随着纳米技术的快速发展,纳米材料进入环境并不断累积,因此开展纳米材料的环境安全性研究具有重要意义.纳米银(Ag NP)是目前应用最广泛的人工纳米材料之一.本课题组拟以Ag NP为研究对象,系统研究其在我国主要类型土壤中的迁移、转化过程及其生态环境效应;基于同步辐射技术、同位素技术和量子化学计算等方法,揭示Ag NP与土壤中主要矿物或有机质之间的相互作用规律;探明Ag NP对土壤中微生物、动物和植物的致毒过程及其作用机制;发展Ag NP在土壤中迁移的数学模型,预测其在土壤中的迁移、滞留通量进而评价其淋溶风险,为Ag NP的安全利用提供重要理论基础和技术支撑.     

Reducing the risk level for pipelines transporting carbon dioxide and hydrogen by means of optimal safety valves spacing

In many countries where electricity generation is based on their natural resources of fossil fuels a need arises to implement new power engineering technologies that allow carbon dioxide capture. Simultaneously, efforts are made to find new energy carriers which, if fired, do not involve carbon dioxide emissions. Hydrogen is one of such fuels with this future potential which is now becoming increasingly popular. Obviously, this means that the two gases mentioned above – carbon dioxide and hydrogen – will be produced in large quantities in future, which in many cases will necessitate their transport over considerable distances. If a pipeline failure occurs, the transport of the gases may pose a serious hazard to people in the immediate vicinity of the leakage site. This paper presents an analysis of the possibility of reducing the level of risk related to pipelines transporting CO₂ and H₂ by means of safety valves. It is shown that for a 50 km long and a 0.4 m diameter pipeline transporting gas with the pressure of 15 MPa the individual risk level can be reduced from 1·10⁻⁴ to 6.5·10⁻⁷ for CO₂ and from 1·10⁻⁶ to 6·10⁻¹⁰ for H₂. The social risk can be diminished in similar proportions.     

The Real-World Safety Potential of Connected Vehicle Technology

Objective: This article estimates the safety potential of a current commercially available connected vehicle technology in real-world crashes.

Method: Data from the Centre for Automotive Safety Research's at-scene in-depth crash investigations in South Australia were used to simulate the circumstances of real-world crashes. A total of 89 crashes were selected for inclusion in the study. The crashes were selected as representative of the most prevalent crash types for injury or fatal crashes and had potential to be mitigated by connected vehicle technology. The trajectory, speeds, braking, and impact configuration of the selected in-depth cases were replicated in a software package and converted to a file format allowing “replay” of the scenario in real time as input to 2 Cohda Wireless MK2 onboard units. The Cohda Wireless onboard units are a mature connected vehicle technology that has been used in both the German simTD field trial and the U.S. Department of Transport's Safety Pilot project and have been tuned for low false alarm rates when used in the real world. The crash replay was achieved by replacing each of the onboard unit Global Positioning System (GPS) inputs with the simulated data of each of the involved vehicles. The time at which the Cohda Wireless threat detection software issued an elevated warning was used to calculate a new impact speed using 3 different reaction scenarios and 2 levels of braking.

Results: It was found that between 37 and 86% of the simulated crashes could be avoided, with highest percentage due a fully autonomous system braking at 0.7 g. The same system also reduced the impact speed relative to the actual crash in all cases. Even when a human reaction time of 1.2 s and moderate braking of 0.4 g was assumed, the impact speed was reduced in 78% of the crashes. Crash types that proved difficult for the threat detection engine were head-on crashes where the approach angle was low and right turn–opposite crashes.

Conclusions: These results indicate that connected vehicle technology can be greatly beneficial in real-world crash scenarios and that this benefit would be maximized by having the vehicle intervene autonomously with heavy braking. The crash types that proved difficult for the connected vehicle technology could be better addressed if controller area network (CAN) information is available, such as steering wheel angle, so that driver intent can be inferred sooner. More accurate positioning in the real world (e.g., combining satellite positioning and accelerometer data) would allow the technology to be more effective for near-collinear head-on and rear-end crashes, because the low approach angles that are common in such crashes are currently ignored in order to minimize false alarms due to positioning uncertainty.     

Compromising sustainable mobility? The case of the Gothenburg congestion tax

Congestion charging is widely considered an effective policy measure to regulate and reduce car traffic demand and associated environmental and health problems in cities. However, introducing restrictive measures to constrain individual choice and behaviour for the common good has often proven difficult. Using a specific case, the Gothenburg congestion tax introduced in 2013, we study the policy process behind the introduction of the tax and assess to what extent green values were compromised along the way. The tax was made possible by co-financing infrastructure investments, including roads, which seemingly contradicts stated goals of reducing car traffic and emissions. We show how the tax was ‘muddled through’ in a top-down political compromise by a grand coalition where different interests could legitimate their support in relation to the achievement of partially conflicting objectives and projects. However, to declare the regulatory goals fully neutralised would be to underestimate the scheme's direct environmental effects and restrictive potential. Finding a compromise with powerful political and economic interests was necessary to get it off the ground. Once launched, however, it can over time regain its restrictive properties and lead to more profound long-term effects.     

Sources and Transport of Phosphorus to Rivers in California and Adjacent States,U.S., as Determined by SPARROW Modeling

The SPARROW (SPAtially Referenced Regression on Watershed attributes) model was used to simulate annual phosphorus loads and concentrations in unmonitored stream reaches in California, U.S., and portions of Nevada and Oregon. The model was calibrated using de‐trended streamflow and phosphorus concentration data at 80 locations. The model explained 91% of the variability in loads and 51% of the variability in yields for a base year of 2002. Point sources, geological background, and cultivated land were significant sources. Variables used to explain delivery of phosphorus from land to water were precipitation and soil clay content. Aquatic loss of phosphorus was significant in streams of all sizes, with the greatest decay predicted in small‐ and intermediate‐sized streams. Geological sources, including volcanic rocks and shales, were the principal control on concentrations and loads in many regions. Some localized formations such as the Monterey shale of southern California are important sources of phosphorus and may contribute to elevated stream concentrations. Many of the larger point source facilities were located in downstream areas, near the ocean, and do not affect inland streams except for a few locations. Large areas of cultivated land result in phosphorus load increases, but do not necessarily increase the loads above those of geological background in some cases because of local hydrology, which limits the potential of phosphorus transport from land to streams.