负载型Mn-Co/TiO2催化剂的制备及其低温NH3选择催化还原NO

采用浸渍法制备了一系列以成型TiO2为载体的Mn-Co/TiO2低温SCR催化剂,研究分析了活性组分担载量、Mn含量、焙烧温度、焙烧时间等制备参数和进口NO浓度、空速、O2体积分数、NH3/N2摩尔比等操作条件对催化剂脱硝反应活性的影响.结果表明:活性组分担载量为30%,Mn/(Mn+Co)摩尔比为80%,在500℃下焙烧6 h得到的Mn-Co/TiO2催化剂具有较高的NO转化率;在进口NO浓度为600×10-6、O2体积分数6%、空速10000 h-1、150℃条件下,NO脱除率接近100%.     

负载型Mn-Ce/TiO2催化剂的制备及其低温脱硝活性简

以成型TiO₂作为载体，通过浸渍法制备了Mn-Ce/TiO₂低温SCR催化剂，并系统研究了制备方法、煅烧条件、活性组分担载量、Mn含量等参数对催化剂催化还原NO性能的影响。结果表明，煅烧温度的升高会促使活性组分结晶度的提高，从而引起催化活性的降低，在500℃和600℃下所得Mn-Ce/TiO₂催化剂活性组分为无定型态，表现出较高的脱硝活性。活性组分担载量的增加有利于催化活性的提高。Mn含量对Mn-Ce/TiO₂催化剂的活性有较大影响，当Mn/（Mn+Ce）摩尔比为40%和85%时，催化剂活性最高。     

制备方法对MgAl水滑石衍生氧化物负载钯催化剂丙烷完全氧化活性的影响

以沉积沉淀法(DP)、浸渍法(IM)和共沉淀法(CP)制备MgAl水滑石衍生氧化物负载钯催化剂,用ICP、XRD、SEM、TEM、EDS、TPR以及比表面测定等手段对催化剂进行了表征.ICP和XRD数据表明用上述3种方法均可成功制备水滑石为前体载钯催化剂.SEM、TEM、EDS数据表明不同方法制备的样品具有不同的形貌以及钯在其中的分散度.综合各类表征数据可知Pd在催化剂中暴露的活性位是影响其活性的主要因素.     

光助Fenton反应催化剂Fe/Al2O3的制备及其对六氯苯的催化活性研究

采用超声促进浸渍法制备了光助Fenton催化剂Fe/Al2O3,利用该催化剂对六氯苯（HCB）进行光助Fenton氧化降解,考察了浸渍液浓度、浸渍温度、灼烧温度和灼烧时间等制备条件对其催化降解六氯苯的活性的影响,确定了制备Fe/Al2O3的工艺条件,并对制得的催化剂进行表征。结果表明,超声促进浸渍法制备非均相光助Fenton反应催化剂Fe/Al2O3的最佳工艺条件为：浸渍液浓度25mmol/L,浸渍温度40℃,焙烧温度500℃,焙烧时间3h。在此条件下制备的催化剂对六氯苯的降解具有较高的催化活性。     

Heavy metal removal from aqueous solution using carbonaceous K2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K2S. Raw coal was mixed with K2S powder and then heated at 800°C for 30 min in nitrogen to produce K2S char. The sulfur content and form in K2S char were determined, and the ability of K2S char to adsorb Zn2+, Cd2+ and Pb2+ was examined. The K2S impregnation was e ective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K2S char was higher than those of raw coal and pyrolysis char. The Zn2+ removal in 2.4 mmol/L of Zn2+ solution by K2S char was higher than raw coal with the removal rate of 100%. K2S char adsorbed Pb2+ and Cd2+ in 24 mmol/L of Pb2+ and Cd2+ solution with the removal rate of 97% and 35%, respectively. The elution extents of adsorbed Pb2+ and Cd2+ were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an e ective adsorbent for heavy metal ions was prepared from coal using K2S sulfur impregnation, and that the adsorbed metals were strongly retained in K2S char.     

V2O5/CeO2催化剂用于低温NH3-SCR的性能研究

采用浸渍法制备了系列V2O5/CeO2催化剂,用于低温NH3选择性催化还原(NH3-SCR)NO.同时,考察了催化剂中V2O5负载量和煅烧温度对催化活性的影响,并运用SEM,BET和XRD物理化学技术对催化剂进行了表征.结果表明,V2O5/CeO2催化剂对模拟烟气中的NO转化呈现出较高的活性,但是V2O5负载量和催化剂的催化活性并不呈线性递增的关系.当V2O5负载量超过10%时,催化剂的催化活性开始下降.随着煅烧温度的升高,由于钒酸铈的生成,催化剂的催化活性下降.400℃为最佳煅烧温度.     

浸渍液pH值对V-Mo/Ti脱硝催化剂性能的影响研究

为提升V-Mo/Ti催化剂的脱硝性能,在催化剂制备过程中调节浸渍工艺参数,制备了一系列不同浸渍液pH值的催化剂,采用XRD、N2-吸附脱附、拉曼光谱、UV-Vis、H2-TPR、NH3-TPD等手段对催化剂进行表征,考察了pH值的变化对催化剂物理化学性能的影响,采用固定床微型反应器对催化剂的脱硝性能进行评价。结果表明,降低浸渍液pH值,可以抑制催化剂上VOx物种的聚合,提升催化剂的还原性能,有利于提升催化剂的脱硝效率,降低脱硝反应过程中N2O生成量。同时,浸渍液pH值的变化,也会影响催化剂的酸性性能。当浸渍液pH值低于3.64时,催化剂酸性性能显著降低,造成催化剂脱硝性能降低;当浸渍液pH值控制在3.64时,催化剂的还原性能和酸性性能匹配较好,从而显示了较高的脱硝性能。     

Comparative study on pyrolysis of bamboo in microwave pyrolysis-reforming reaction by binary compound impregnation and chemical liquid deposition modified HZSM-5

The deactivation of catalyst is a significant reason for its limited application during the catalytic fast pyrolysis (CFP) process. To reduce the coke formation, binary compound impregnation (BCI) and chemical liquid deposition (CLD) were used to modify HZSM-5 catalysts. At the same time, the self-designed microwave reactor separated the pyrolysis of bamboo and catalytic upgrading of primary vapor, which made the catalytic effect more thorough. Experimental results indicated that CLD used TiO₂ deposition to cover external acid sites, while BCI by phosphorus-nickel could cover and partly destroy superficial acid sites through two different ways. Within the scope of the loaded amount studied, the yield of aromatic hydrocarbons in the oil phase increased at first and then decreased, while the coke formation reduced continuously. BTX (benzene, toluene and xylene), the most valuable product in bio-oil, drastically increased by 39.1% and 22.6% respectively over the CLD and BCI modified catalysts. Considering the catalytic performance as well as cost, CLD over HZSM-5 has more advantages in the CFP process to upgrade bio-oil.     

双功能吸附剂的制备及其对水中毒死蜱的降解特性

对具有催化功能的负载Fe（Ⅲ）的活性炭进行了表征，与母体活性炭相比，其比表面积以及微孔体积均有所下降，酸性官能团的量有所增加；考察了普通浸渍法和超声浸渍法制备的双功能活性炭对毒死蜱的吸附和降解性能，结果表明，双功能活性炭对毒死蜱的吸附量有所降低，但对毒死蜱的降解能力增强，超声浸渍法所制备的活性炭对毒死蜱的降解能力要优于普通浸渍法所制备的活性炭。     

焙烧条件对CuO/ZSM-5催化剂脱硫脱硝性能的影响

以ZSM-5分子筛为载体,通过浸渍法制备10％ CuO/ZSM-5(金属氧化物质量占载体质量)催化剂,以CH4为还原气,考察不同焙烧温度和焙烧时间对催化剂脱硫脱硝性能的影响.XRD和TPR的表征结果显示,最佳焙烧条件为550℃下焙烧4h,在此焙烧条件下,10％ CuO/ZSM-5催化剂达到的最高脱硝脱硫率分别为90.6％和98.8％.