Simultaneous removal of cyanobacterial blooms and production of clean water by coupling flocculation with a rotary drum filter

Environmental Science and Pollution Research - A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial...     

A comprehensive review on green buildings research: bibliometric analysis during 1998–2018

Environmental Science and Pollution Research - Buildings account for nearly 2/5ths of global energy expenditure. Due to this figure, the 90s witnessed the rise of green buildings (GBs) that were...     

The land carrying capacity and environmental risk assessment of livestock and poultry breeding considering crop planting

Environmental Science and Pollution Research - At present, the contradiction between survival and ecology necessitates the integration of crop planting, chemical fertilizer application, and...     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

Characteristic and mechanism of sorption and desorption of benzene on humic acid

Environmental Science and Pollution Research - The sorption/desorption behaviors of benzene, toluene, ethylbenzene, and xylene (BTEX) on soil organic matter (SOM) have a significant influence on...     

Comprehensive utilization of residues of Magnolia officinalis based on fiber characteristics

Journal of Material Cycles and Waste Management - The traditional Chinese medicinal plant Magnolia officinalis has a wide range of applications; including more than 200 kinds of patented Chinese...     

项目决策阶段清洁生产分析方法的研究

企业在建设项目决策时就应该按照清洁生产的原则，从源头控制污染。提出了在项目决策中，应从产品选择、工艺路线选择、主要设备选型和节能降耗4个方面进行清洁生产的分析方法，通过此分析方法的应用，可以避免项目决策中的环境失误和降低企业的环境风险。     

喜凉作物生长期对全球变暖停滞响应的时空差异——以中国绿洲为例

基于中国绿洲喜凉作物（chimonophilous crop）分布区39个站点1960~2016年逐日平均气温资料,运用线性趋势法、反距离加权插值（IDW）、Morlet小波、Mann-Kendall检验等方法,研究中国绿洲喜凉作物气候生长期的时空变化对变暖停滞的响应.结果表明：①变暖停滞期,中国绿洲喜凉作物气候生长期起、止日及生长期日数以-0.2d/10a、0.33d/10a、0.53d/10a的趋势变化,较1960~2016年起始日提前趋势减缓1.01d/10a,终止日推迟减缓1.28d/10a,生长期日数延长减缓2.3d/10a,对变暖停滞有响应.②中国绿洲喜凉作物气候生长期起始日对变暖停滞响应的站点有44%,终止日和生长期日数均为49%,主要分布在南疆、柴达木盆地和河西绿洲,其中河西绿洲对变暖停滞响应最明显,南疆次之,柴达木最小,而北疆绿洲不存在滞缓现象,显然空间差异明显.③M-K检验显示,中国绿洲喜凉作物气候生长期起、止日及生长期日数分别在2001年、1990年和1997年发生突变,起始日晚于变暖停滞起始年份,终止日和生长期日数早于变暖停滞起始年,且分绿洲生长期日数突变年与变暖停滞起始年相接近.④Morlet小波得出变暖停滞期其变化稳定存在2.4~4.3a的震荡周期,表明未来几年中国绿洲喜凉作物气候生长期仍持续延长.     

某型飞机外翼5—8肋损伤原因分析及修复探讨

目的 分析某型飞机外翼5—8肋油箱区结构不同程度损伤的原因,制定修复方案。方法采用受载分析、有限元仿真计算、静力试验数据分析等强度计算方法分析损伤产生的原因,采用扫描电子显微镜和光学显微镜对磨痕形貌进行观测等失效分析,对损伤结构件开展失效模式分析,根据损伤原因及失效模式制定科学简便的修复方案,同时对损伤长桁采取的修补措施进行强度校核。结果 通过对外翼油箱充压破坏理论分析、有限元仿真计算、静力试验数据反推,并结合飞机实际损伤情况,得出油箱破坏理论分析危险薄弱部位与真实破坏情况一致的结论。有限元仿真计算最危险结构部位与实际结构首先发生破坏部位吻合,可作为深入制定修复方案及推测实际加载压力的依据。通过静力试验数据反推、结构实际损伤及有限元仿真计算结论得出,外翼5—8肋结构出现损伤时油箱施加压力约0.5 MPa,针对损伤制定了更换外翼油箱内部第5—8肋损伤结构和贴补加强损伤长桁的修理方案,经结构强度校核,满足设计要求。结论 分析认为外翼5—8肋油箱区结构损伤原因为油箱压力超过设计值导致结构过载断裂,采用贴补加强修理损伤长桁和更换第5—8肋损伤结构的修复方案能够满足强度设计要求,可指导同类飞机类似结构损伤故障的原因分析和修理,提醒同类飞机维修人员在飞机维护时应关注外翼油箱压力超压问题。     

PM_(2.5)严重超标下户外运动的风险评估模型设计研究

PM_(2.5)严重超标下进行户外运动可能会导致肺部疾病的风险,建立户外运动的风险评估模型,通过定量分析PM_(2.5)含量与户外运动的身体机能指标参量的关系,实现数学建模,指导户外运动锻炼。提出基于最大摄氧量定量递归分析的PM_(2.5)严重超标下户外运动的风险评估模型。构建户外运动风险评估约束参量,采用模板参数对照法和定量递归分析方法进行风险评估优化求解,结合模糊决策方法进行PM_(2.5)超标环境下的户外运动的风险评估建模,求得最大摄氧量、最大通气量等参数的最优值,从而指导户外运动训练。