Application of nanobalance technique and principal component analysis for detection of the soil fumigant Telone residues in the air

Quartz crystal nanobalance (QCN) technique is considered as a powerful mass sensitive sensor for monitoring of materials in the sub-nanogram level. In the current study, a method based on QCN technique developed to determine Telone in air. Various coating materials including methyl phenyl silicon, 75% phenyl (OV25) and molecularly imprinted polymer (MIP) were employed. The frequency shift of OV25-modified quartz crystal was found to be linear against organohalogen compounds [Telone (soil fumigant), Koril (Herbicide), Endosulfan (organochlorine insecticide) and Chloroform (solvent)] concentrations in the range of 2.4 to 48 mg L(-1) for Telone vapor and 4.8-24 mg L(-1) for three other vapors. The correlation coefficients for Telone, Koril, Endosulfan and Chloroform were 0.992, 0.996, 0.989 and 0.991, respectively. The principal component analysis was also utilized to process the frequency response data of the organic vapors. Using principal component analysis, it was found that more than 93.85% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful discrimination of Telone and other compounds was quite possible through the principal component analysis of the transient responses of the OV25-modified electrode. In the second method, a molecularly imprinted polymer-coated sensor for Telone was developed. Molecularly imprinted polymer coated quartz crystal (MIP-QCN) showed a selective response to Telone and gave a linear relationship between frequency shift and amount of Telone from 1 to 48 mg L(-1). In this investigation, the proficiency of MIP-QCN and OV25-modified QCN sensors were compared.     

Measurement of the pesticide methomyl by modified quartz crystal nanobalance with molecularly imprinted polymer

A simple and cost-effective analysis method based on quartz crystal nanobalance (QCN) coated with a molecularly imprinted polymer (MIP) for measurement of methomyl was investigated. In the first part of this study, a sensitive, selective and reliable quartz crystal nanobalance (QCN) sensor was designed for the selective determination of methomyl in aqueous solutions. In the second part, in order to demonstrate the applicability and performance of the fabricated sensor in the real world situation, it was successfully applied for the determination of methomyl residual in photo catalytic degradation by ZnO powders in aqueous solutions. The fabricated sensor presents a high selectivity and sensitivity (4.56 Hz per mg L^?1) for methomyl and it can be used for determination of methomyl concentration ranged between 1 to 45 mg L^?1. Furthermore, good reproducibility, R.S.D. = 2.14% (n = 5) was observed. To investigate the performance of the sensor, the change in the insecticide concentration during the photocatalytic degradation of methomyl by ZnO was investigated by QCN and UV/Vis spectroscopy. Results obtained from QCN sensor and UV/Vis spectroscopy measurement are in good mutual agreement. So the fabricated sensor may provide an efficient, low cost, easy-to-use method for the in-field evaluation of specific targeted analytes in aqueous solutions which in turn may lead to improved food and water safety.     

Molecularly imprinted polymer for analysis of trace atrazine herbicide in water

A molecularly imprinted polymer (MIP) for atrazine was synthesized by non-covalent method. The binding capacity of MIP was 1.00 mg g^{? 1} polymer. The selectivity and recovery were investigated with various pesticides which are mostly, found in the environment, for both similar and different chemical structure of atrazine. The competitive recognition between atrazine and structurally similar compounds was evaluated and it was found that the system provided highest recovery and selectivity for atrazine while low recovery and selectivity were obtained for the other compounds. The highest recovery was obtained from MIP compared with non-imprinted polymer (NIP), a commercial C₁₈ and a granular activated carbon (GAC) sorbent. The method provided high recoveries ranged from 94 to 99% at two spiked levels with relative standard deviations less than 2%. The lower detection limit of the method was 80 ng L^{? 1}. This method was successfully applied for analysis of environmental water samples.     

Assessment of Organochlorine Pesticide Residues in Water,Sediment, and Fish of the Songhua River,China

This study examined residual concentrations and associated ecological risks of the organochlorine pesticides (OCPs) hexa- chlorocyclohexane (HCH) and dichloro-diphenyl-trichloroethane (DDT) in water, sediment, and fish of the Songhua River in Zhaoyuan County, China. In June 2012, 10 water, 10 sediment, and 20 fish samples were collected. Residual concentrations of ΣHCH and ΣDDT ranged from 10.0–35.59 ng L^?1 (mean 28.03 ± 11.66 ng L^?1) and 5.12–39.66 ng L^?1 (mean 32.36 ± 11.58 ng L^?1) for water. Residual concentrations of ΣHCH and ΣDDT ranged from 0.52–3.00 ng g^?1 (mean 2.04 ± 0.73 ng g^?1) and 0.34–3.41 ng g^?1 (mean 2.38 ± 0.92 ng g^?1) for sediment. The ratios of α-HCH/γ-HCH were close to 1 at the majority of sampling points, indicating considerable new pollution from the use of lindane. The ratios of p,p′-DDE + p,p′-DDD/ΣDDT were less than 0.5, indicating recent inputs from DDT impurities in dicofol. All HCH and DDT isomers except for p,p′-DDD were detected in fish tissue samples, but the associated ecological risks were estimated to be below levels of concern. The study revealed a historical usage of OCPs in the Zhaoyuan section of the Songhua River and new OCP from the use of lindane and dicofol.     

Influence of tetracycline exposure on the growth of wheat seedlings and the rhizosphere microbial community structure in hydroponic culture

In this study, the effects of tetracycline exposure on wheat growth and the microbial community structure in the rhizosphere were investigated under hydroponic culture conditions. Exposure to various concentrations of tetracycline resulted in significant suppression of the growth of wheat roots and shoots, with minimum doses of 0.8 mg L^?1 and 4 mg L^?1 resulting in inhibition rates of 32% and 15.4%, respectively. Complete inhibition of the growth of these two parts of wheat plants was observed in response to treatment with tetracycline at 20 mg L^?1 and 100 mg L^?1, respectively. However, the germination of wheat seeds was not sensitive to exposure to tetracycline. The effects of tetracycline exposure on the microbial community in the wheat rhizosphere were evaluated through traditional cultivation and molecular biological analyses. The cultivation results indicated that bacteria were the dominant population, being present in concentrations of 1× 10⁸–2.45× 10⁹CFUs mL^?1, although 39% to 87% inhibition occurred in response to tetracycline. The concentration of fungi increased in all tetracycline treated samples to 2.5 to 15.8 times that of the control. The highest concentration of fungi (4.27× 10⁸ CFU mL^?1) was observed in response to 60 mg L^?1 tetracycline after 15 days of cultivation. In this stage, a large amount of fungal colonies was observed on the surface of the culture solution, the wheat roots became rotted and the plants became atrophic or even died. Molecular biological analysis indicated that the bacterial community structure was significantly different in samples that were exposed to high levels of tetracycline (over 20 mg L^?1) than in samples that were exposed to lower concentrations. As the concentration of tetracycline increased, the diversity of the bacteria decreased. Additionally, several dominant sensitive species such as Sphingobacterium multivorum were suppressed by tetracycline, while some resistant species such as Acinetobacter sp. appeared or were conserved. The bacteria population tended to stabilize when the drug concentration exceeded 40 mg L^?1.     

Remediation of alachlor and atrazine contaminated water with zero-valent iron nanoparticles

Zero-valent iron nanoparticles (nZVI, diameter < 90 nm, specific surface area = 25 m² g^?1) have been used under anoxic conditions for the remediation of pesticides alachlor and atrazine in water. While alachlor (10, 20, 40 mg L^?1) was reduced by 92–96% within 72 h, no degradation of atrazine was observed. The alachlor degradation reaction was found to obey first-order kinetics very closely. The reaction rate (35.5 × 10^?3–43.0 × 10^?3 h^?1) increased with increasing alachlor concentration. The results are in conformity with other researchers who worked on these pesticides but mostly with micro ZVI and iron filings. This is for the first time that alachlor has been degraded under reductive environment using nZVI. The authors contend that nZVI may prove to be a simple method for on-site treatment of high concentration pesticide rinse water (100 mg L^?1) and for use in flooring materials in pesticide filling and storage stations.     

Fast determination of sulfonamides and their acetylated metabolites from environmental water based on magnetic molecularly imprinted polymers

Group-selective magnetic molecularly imprinted polymers (MMIPs) that can extract four widely used sulfonamide antibiotics and their acetylated metabolites from environmental water were synthesized in this study. The MMIPs with saturation magnetization value of 16.7 emu g^-1 could be separated from the environmental water samples easily by the application of an adscititious magnetic field, reducing the time consumption of pretreatment. The extraction conditions were evaluated, and optimal extraction conditions were as follows: extraction time, 25 min; amount of polymers, 90 mg; washing solvent, 30 % methanol aqueous solution; and elution solvent, methanol–acetic acid (95:5, v/v). The target analytes were detected by liquid chromatography–tandem mass spectrometry, and the detection limits of the method are in the range of 0.38–1.32 ng L^-1. The relative standard deviations of intra- and inter-day are in the range of 1.3–6.8 % and 1.7–9.1 %, respectively. The proposed method is suitable for the analysis of environmental water samples.     

Electrochemical study of the fungicide acibenzolar-s-methyl and its voltammetric determination in environmental samples

The electrochemical behavior of new generation fungicide acibenzolar-s-methyl (S-methyl 1,2,3-benzothiadiazole-7-carbothioate, ASM) on the hanging mercury drop electrode (HMDE) was investigated using square wave adsorptive stripping voltammetry. This method of determination is based on the irreversible reduction of ASM at the HMDE. The well-defined ASM peak was observed at ?0.4 V (vs. Ag/AgCl) in BR buffer at pH 2.2. The reduction peak current was proportional to concentration of ASM from 1.0 × 10^?8 to 6.0 × 10^?8 mol L^?1 with detection and quantification limit 3.0 × 10^?9 and 1.0 × 10^?8 mol L^?1, respectively. The applicability of the developed method for analysis of spiked samples of tap water, river water, and soil is illustrated. The effect of adsorption on the mercury electrode was studied in detail using the AC impedance method. Possible interferences with other common pesticides and heavy metal ions were examined. Clarification of the electrode mechanism was made using cyclic voltammetry (CV) technique.     

Principal component analysis to assess the efficiency and mechanism for enhanced coagulation of natural algae-laden water using a novel dual coagulant system

A novel dual coagulant system of polyaluminum chloride sulfate (PACS) and polydiallyldimethylammonium chloride (PDADMAC) was used to treat natural algae-laden water from Meiliang Gulf, Lake Taihu. PACS (Al_n(OH)_mCl_3n-m-2k(SO₄)_k) has a mass ratio of 10 %, a SO₄ ^2?/Al₃ ⁺ mole ratio of 0.0664, and an OH/Al mole ratio of 2. The PDADMAC ([C₈H₁₆NCl]_m) has a MW which ranges from 5?×?10⁵ to 20?×?10⁵ Da. The variations of contaminants in water samples during treatments were estimated in the form of principal component analysis (PCA) factor scores and conventional variables (turbidity, DOC, etc.). Parallel factor analysis determined four chromophoric dissolved organic matters (CDOM) components, and PCA identified four integrated principle factors. PCA factor 1 had significant correlations with chlorophyll-a (r?=?0.718), protein-like CDOM C1 (0.689), and C2 (0.756). Factor 2 correlated with UV₂₅₄ (0.672), humic-like CDOM component C3 (0.716), and C4 (0.758). Factors 3 and 4 had correlations with NH₃-N (0.748) and T-P (0.769), respectively. The variations of PCA factors scores revealed that PACS contributed less aluminum dissolution than PAC to obtain equivalent removal efficiency of contaminants. This might be due to the high cationic charge and pre-hydrolyzation of PACS. Compared with PACS coagulation (20 mg L^?1), the removal of PCA factors 1, 2, and 4 increased 45, 33, and 12 %, respectively, in combined PACS–PDADMAC treatment (0.8 mg L^?1?+?20 mg L^?1). Since PAC contained more Al (0.053 g/1 g) than PACS (0.028 g/1 g), the results indicated that PACS contributed less Al dissolution into the water to obtain equivalent removal efficiency.     

Biodegradation of imidacloprid in liquid media by an isolated wastewater fungus Aspergillus terreus YESM3

In the present study, a new fungal strain capable of imidacloprid degradation was isolated from agricultural wastewater drain. The fungal strain of YESM3 was identified as Aspergillus terreus based on ITS1-5.8S rDNA-ITS2 gene sequence by PCR amplification of a 500 bp sequence. Screening of A. terreus YESM3 to the insecticide imidacloprid tolerance was achieved by growing fungus in Czapek Dox agar for 6 days at 28°C. High values (1.13 and 0.94 cm cm^?1) of tolerance index (TI) were recorded at 25 and 50 mg L^?1 of imidacloprid, respectively in the presence and absence of sucrose. However, at 400 mg L^?1 the fungus did not grow. Effects of the imidacloprid concentration, pH, and inoculum size on the biodegradation percentage were tested using Box–Behnken statistical design and the biodegradation was monitored by HPLC analysis at different time intervals. Box–Behnken results indicated that optimal conditions for biodegradation were at pH 4 and two fungal discs (10 mm diameter) in the presence of 61.2 mg L^?1 of imidacloprid. A. terreus YESM3 strain was capable of degrading 85% of imidacloprid 25 mg L^?1 in Czapek Dox broth medium at pH 4 and 28°C for 6 days under static conditions. In addition, after 20 days of inoculation, biodegradation recorded 96.23% of 25 mg L^?1 imidacloprid. Degradation kinetics showed that the imidacloprid followed the first order kinetics with half-life (t₅₀) of 1.532 day. Intermediate product identified as 6-chloronicotinic acid (6CNA) as one of the major metabolites during degradation of imidacloprid by using HPLC. Thus, A. terreus YESM3 showed a potential to reduce pollution by pesticides and toxicity in the effected environment. However, further studies should be conducted to understand the biodegradation mechanism of this pesticide in liquid media.     

Human milk contamination by nine organochlorine pesticide residues (OCPs)

Abstract

Organochlorine pesticides (OCPs) are widely used around the world as insecticides, herbicides, fungicides, nematicides, and rodenticides. Despite banned in Brazil, the usage remains occurring in many countries. The persistence and extreme mobility of OCPs contribute to the contamination of the environment and the human body. The OCPs bioaccumulation in adipose tissue triggers the excretion into human milk during breastfeeding. Hence, the present study determined eighteen OCPs residues in the breast milk of mothers from the Western Region of Bahia State, Brazil. Nine different residue species were found, including beta-Hexachlorocyclohexane (9.24?±?0.00?ng g^?1 fat), delta- Hexachlorocyclohexane (22.15?±?10.48?ng g^?1 fat), Heptachlor (58.08?±?74.13?ng g^?1 fat), Aldrin (142.65?±?50.65?ng g^?1 fat), Dieldrin (774.62?±?472.68?ng g^?1 fat), Endosulfan I (408.44?±?245.51?ng g^?1 fat), Dichloro-diphenyl-dichloro-ethylene (29.17?±?22.42?ng g^?1 fat), Dichloro-diphenyl-trichloro-ethane (28.87?±?0.00?ng g^?1 fat) and Methoxychlor (1699.67?±?797.43?ng g^?1 fat). The Methoxychlor presence in all samples may reveal a recent exposure, while Dieldrin and Endosulfan I analyses can point to distant past exposure.     

Preparation of activated carbon from dried pods of Prosopis cineraria with zinc chloride activation for the removal of phenol

Utilization of agrowaste materials for the production of activated carbon, as an excellent adsorbent with large surface area, is well established industrially, for dephenolation of wastewater. In the present work, dried pods of Prosopis cineraria—a novel and low-cost agrowaste material—were used to prepare activated carbons by zinc chloride activation. Batch adsorption experiments were carried out to study the effects of various physicochemical parameters such as initial phenol concentration, adsorbent dose, initial solution pH, and temperature. Pseudo-first-order second-order and diffusion kinetic models were used to identify the possible mechanisms of such adsorption process. The Langmuir and Freundlich equations were used to analyze the adsorption equilibrium. Maximum removal efficiency of 86 % was obtained with 25 mg?L^?1 of initial phenol concentration. The favorable pH for maximum phenol adsorption was 4.0. Freundlich equation represented the adsorption equilibrium data more ideally than the Langmuir. The maximum adsorption capacity obtained was 78.32 mg?g^?1 at a temperature of 30 °C and 25 mg?L^?1 initial phenol concentration. The adsorption was spontaneous and endothermic. The pseudo-second-order model, an indication of chemisorption mechanism, fitted the experimental data better than the pseudo-first-order Lagergren model. Regeneration of spent activated carbon was carried out using Pseudomonas putida MTCC 2252 as the phenol-degrading microorganism. Maximum regeneration up to 57.5 % was recorded, when loaded phenol concentration was 25 mg?L^?1. The data obtained in this study would be useful in designing and fabricating an efficient treatment plant for phenol-rich effluents.     

Effect of vegetation in pilot-scale horizontal subsurface flow constructed wetlands treating sulphate rich groundwater contaminated with a low and high chlorinated hydrocarbon

In order to characterize the effect of vegetation on performance of constructed wetlands (CWs) treating low and high chlorinated hydrocarbon, two pilot-scale horizontal subsurface flow (HSSF) CWs (planted with Phragmites australis and unplanted) treating sulphate rich groundwater contaminated with MCB (monochlorobenzene, as a low chlorinated hydrocarbon), (about 10 mg L⁻¹), and PCE (perchloroethylene, as a high chlorinated hydrocarbon), (about 2 mg L⁻¹), were examined. With mean MCB inflow load of 299 mg m⁻² d⁻¹, the removal rate was 58 and 208 mg m⁻² d⁻¹ in the unplanted and planted wetland, respectively, after 4 m from the inlet. PCE was almost completely removed in both wetlands with mean inflow load of 49 mg m⁻² d⁻¹. However, toxic metabolites cis-1,2-DCE (dichloroethene) and VC (vinyl chloride) accumulated in the unplanted wetland; up to 70% and 25% of PCE was dechlorinated to cis-1,2-DCE and VC after 4 m from the inlet, respectively. Because of high sulphate concentration (around 850 mg L⁻¹) in the groundwater, the plant derived organic carbon caused sulphide formation (up to 15 mg L⁻¹) in the planted wetland, which impaired the MCB removal but not statistically significant. The results showed significant enhancement of vegetation on the removal of the low chlorinated hydrocarbon MCB, which is probably due to the fact that aerobic MCB degraders are benefited from the oxygen released by plant roots. Vegetation also stimulated completely dechlorination of PCE due to plant derived organic carbon, which is potentially to provide electron donor for dechlorination process. The plant derived organic carbon also stimulated dissimilatory sulphate reduction, which subsequently have negative effect on MCB removal.     

Trace phthalate and adipate esters contaminated in packaged food

A method for trace analysis of two plasticizers, di-2-ethylhexyl phthalate (DEHP) and di-2-ethylhexyl adipate (DEHA), contaminated in packaged curry paste were investigated by gas chromatography with flame ionization detector (GC-FID). Curry paste samples were extracted by ultrasonic and solid phase extraction using Florisil® cartridge. Analysis by the GC-FID system provided limits of detection for DEHA and DEHP at 12 and 25 μ g L^{? 1} and a linear dynamic range between 25 μ g L^{? 1} to 60 mg L^{? 1} with a coefficient of determination (R²) greater than 0.99. High recoveries were obtained, ranged from 91 to 99% and 88 to 98% for DEHP and DEHA with RSD lower than 7 and 10% respectively. The method detection limit and limits of quantitation were ranged from 27 to 30 and 90 to 100 μ g L^{? 1}. The analysis of curry paste samples showed concentrations of DEHP and DEHA in the range of 4.0 ng g^{? 1} to 0.61 μg g^{? 1}.     

Assessment of the allelopathic effect of leaf and seed extracts of Canavalia ensiformis as postemergent bioherbicides: A green alternative for sustainable agriculture

The herbicidal potential of aqueous extracts prepared from leaves and seeds of Canavalia ensiformis was tested by applying them postemergence to the crop weeds Ipomoea grandifolia and Commelina benghalensis. Considering the possible objective of using this bioherbicide on soybean fields, the extracts were also tested for deleterious effects on both transgenic and conventional soybean (Glycine max). In addition, the concentrations of four phenolic compounds and alkaloids with allelopathic properties in these extracts were estimated by high-performance liquid chromatography. The seed extract at concentrations of 25 g L^?1 and 50 g L^?1 was the most efficient postemergent bioherbicide. By applying these extracts, the development of the weed seed was progressively hindered until no recovery was observed. The application of 3.5 mL of crude extract on a plant that takes 30 days after germination of the seed to develop is sufficient for full control of the species within 5 days. Since both Ipomoea grandifolia and Commelina benghalensis are broadleaf dicotyledons, it is possible that other species with these characteristics can also be controlled or suffer the same effects under the action of the seed extract, if the same volume and mode of application are used. The selectivity of the treatments with 25 g L^?1 and 50 g L^?1 was assessed on transgenic and conventional cultivars. The treatments did not visibly affect the soybean cultivars, which developed normally during the observation period that continued up to 15 days after the death of the weeds.     

Biodegradation of triazine herbicide metribuzin by the strain Bacillus sp. N1

By enrichment culturing of soil contaminated with metribuzin, a highly efficient metribuzin degrading bacterium, Bacillus sp. N1, was isolated. This strain grows using metribuzin at 5.0% (v/v) as the sole nitrogen source in a liquid medium. Optimal metribuzin degradation occurred at a temperature of 30ºC and at pH 7.0. With an initial concentration of 20 mg L^?1, the degradation rate was 73.5% in 120 h. If the initial concentrations were higher than 50 mg L^?1, the biodegradation rates decreased as the metribuzin concentrations increased. When the concentration was 100 mg L^?1, the degradation rate was only 45%. Degradation followed the pesticide degradation kinetic equation at initial concentrations between 5 mg L^?1 and 50 mg L^?1. When the metribuzin contaminated soil was mixed with strain N1 (with the concentration of metribuzin being 20 mg L^?1 and the inoculation rate of 10¹¹ g^?1 dry soil), the degradation rate of the metribuzin was 66.4% in 30 days, while the degradation rate of metribuzin was only 19.4% in the control soil without the strain N1. These results indicate that the strain N1 can significantly increase the degradation rate of metribuzin in contaminated soil.     

Evaluation of growth and biochemical indicators of Salvinia natans exposed to zinc oxide nanoparticles and zinc accumulation in plants

The adverse effects of zinc oxide nanoparticles (ZnO NPs) with an average diameter of 25 nm on the aquatic plant Salvinia natans (L.) All. were determined. Growth, superoxide dismutase (SOD) activity, catalase (CAT) activity, peroxidase activity, and chlorophyll content of the plants were measured after 7 days of exposure to different concentrations of ZnO NPs (1 to 50 mg L^?1). The particle distribution in the culture medium (without plants) during the first 24 h was determined using a Nanotrac 250 particle analyzer. We also investigated the zinc accumulation in leaves and roots of the plant after 7 days of exposure. Exposure to 50 mg L^?1 ZnO NPs significantly increased SOD and CAT activities (P?<?0.05) and significantly depressed photosynthetic pigments (P?<?0.05). However, plant growth was not significantly affected (P?>?0.05). NPs completely precipitated at the bottom of the container at 8 h except for the portions of dissolution and aggregation on the roots. ZnO NPs at a concentration of 50 mg L^?1 can adversely affect S. natans, and their stress is affected by their aggregation and dissolution.     

Responses of phytoplankton functional groups to environmental factors in the Pearl River,South China

The variations of phytoplankton functional groups and their correlation with environmental factors, as well as the applicability of phytoplankton functional groups to serve as biological water quality indicator in the Pearl River, South China, were studied in the present study. A total of 96 samples were collected and divided into 21 functional groups from September 2016 to July 2017. The phytoplankton functional groups P and G were dominant during the investigation, and their biomass contributing was ranged 0.06 to 89.07%, the average 30.73%, and ranged 1.47 to 62.40%, the average 9.33% of the total biomass, respectively. The results showed environmental estrogens—BPA (bisphenol A), E2 (17β-estradiol), E1 (estrone), 4-t-OP (4-tert-octylphenol), 4-NP (nonylphenol), TCS (triclosan), and TCC (triclocarban)—in the Pearl River were significantly different, and with average values of 269.30 ng L^?1, 2.76 ng L^?1, 4.24 ng L^?1, 53.68 ng L^?1, 952.72 ng L^?1, 16.79 ng L^?1, and 8.61 ng L^?1, respectively. This was likely responsible for the differences in the phytoplankton functional groups. We observed positive correlations between P and A, and G and J. Functional groups P biomass decreased significantly with functional groups L_M increased, and functional groups M and J with X2. We found positive correlations between functional group G and concentrations of E1 and TCC; functional group A and total nitrogen (TN), 4-NP, 4-t-OP, and E2; functional groups L_M and L1 and total suspended particles, BPA, and TCS; and functional group G and negative total phosphorus (TP), pH, and TCS. The study showed that TN, TP, and the environmental estrogens in the aquatic ecosystems were correlation with phytoplankton functional groups type, and affected the ecological balance in aquatic environments.

     

Effect of the pesticide lindane on the biomass of the microalgae Nannochloris oculata

This study assesses the growth of the microalgae Nannochloris oculata in the presence of lindane and the ability of N. oculata to remove lindane from media. Algal biomass increased with 0.1 and 0.5 mg L^?1 of lindane, and lindane concentrations in the media decreased. N. oculata removed 73% and 68.2% of lindane in the 0.1 and 0.5 mg L^?1 media concentrations, respectively. Algal biomass decreased to the level of the control at lindane concentrations greater than 2.5 mg L^?1, probably due to toxicity. N. oculata removed lindane from the media at concentrations lower than 1.0 mg L^?1. Thus, N. oculata may be useful for lindane bioremediation in contaminated aquatic systems.     

Root porosity and radial oxygen loss related to arsenic tolerance and uptake in wetland plants

The rates of radial oxygen loss (ROL), root porosity, concentrations of arsenic (As), iron (Fe) and manganese (Mn) in shoot and root tissues and on root surfaces, As tolerances, and their relationships in different wetland plants were investigated based on a hydroponic experiment (control, 0.8, 1.6 mg As L⁻¹) and a soil pot trail (control, 60 mg As kg⁻¹). The results revealed that wetland plants showed great differences in root porosity (9-64%), rates of ROL (55-1750 mmo1 O₂ kg⁻¹ root d.w. d⁻¹), As uptake (e.g., 8.8-151 mg kg⁻¹ in shoots in 0.8 mg As L⁻¹ treatment), translocation factor (2.1-47% in 0.8 mg As L⁻¹) and tolerance (29-106% in 0.8 mg As L⁻¹). Wetland plants with higher rates of ROL and root porosity tended to form more Fe/Mn plaque, possess higher As tolerance, higher concentrations of As on root surfaces and a lower As translocation factor so decreasing As toxicity.