浙江省某印染企业VOCs的产生特征及去除特性

为探究印染行业生产过程中挥发性有机物(volatile organic compounds, VOCs)的产生特征及现有控制措施对VOCs的去除效果,选取浙江某典型印染企业作为研究对象,调查了该企业主要VOCs污染源(包括定型机、配料间及污水站)的废气产生特征,测定和评价了各废气处理装置对VOCs的去除效果。结果表明,该企业定型机、配料间及污水站产生的有组织废气总流量分别为8.6×10~5、7.4×10~4、2.8×104 m~3·h~(-1),产生的VOCs平均浓度分别为14.7、9.0和14.9 mg·m~(-3),有组织废气源VOCs的年产生总量约为80 t。定型车间、印染车间和污水站附近无组织VOCs的平均浓度分别约为0.66、0.16和0.59 mg·m~(-3)。产生的典型VOCs包括苯甲酸苄酯、五氟丙酸三十八烷酯、乙二醇单丁醚、十六烷、异喹啉等。定型机废气采用"冷却+静电"或"喷淋+静电"工艺处理,其对VOCs的去除率仅为2%～6%。配料间和污水站产生废气采用"碱洗+次氯酸钠洗涤"工艺处理,其对VOCs的去除率为8%～58%。研究结果可为印染行业VOCs污染控制提供参考。     

循环水净化染整定型机废气的初步研究

针对染整定型机废气具有较高的温度和湿度的特点,采用湿式净化技术处理该废气,并通过水洗试验装置对湿式净化效果进行了初步研究.结果表明,染整定型机废气的油烟颗粒在水中形成水包油型乳浊液;水洗液的COD与进气时间有较好的线性关系;在一定时间内,水对染整定型机废气的吸收速率保持稳定.用循环水对染整定型机废气喷淋洗涤,在一定时间内有较高的净化效率,并且可以降低水的消耗量,同时有效减少二次污染的产生.     

高压静电催化耦合净化空气中的臭氧控制及其室内浓度预测模型

静电除尘技术由于其风阻小、PM_(2.5)净化效率高等特点,在空气污染治理中的应用备受关注。针对民用静电式空气净化装置的高压静电模块产生臭氧的问题,对比了在不同尺寸密封舱中高压静电模块与催化模块耦合前后臭氧浓度水平。依据单空间充分混合假设下的臭氧质量守恒方程和室内臭氧浓度衰减特性,针对有静电式空气净化装置的室内环境建立了可工程实用的臭氧浓度预测模型,并结合密封舱实验对预测模型进行了验证。研究表明高压静电耦合催化模块后能使舱内臭氧浓度维持在安全限值以内。该预测模型能有效预测室内臭氧浓度,对静电式空气净化器设计有指导意义。     

废弃电路板破碎—风选—高压静电分选生产线的经济分析

在研制废弃电路板破碎—风选—高压静电分选生产线的基础上,从技术、经济的角度对生产线工业化规模应用项目进行了分析.结果表明,项目产值利润率和投资利润率分别达到24.65％、63.08％,生产线项目投资2.52年后可全部收回,内部收益率为43.00％.当生产能力利用率达到10.42％时,即可盈利.销售收入为最敏感因素,当其...     

中央空调净化系统的改进措施

介绍了室内空气净化技术及其特点.针对中央空调系统的特点,提出了将活性炭吸附技术、TiO2光催化技术与静电除尘技术结合的静电活性炭-TiO2光催化复合技术,这一组合技术可能成为今后空调系统空气净化系统重要的改进措施.     

饮食业油烟净化技术与应用

近年来,饮食业油烟污染已成为城市大气污染的主要来源之一.比较分析了目前国内使用的几类油烟净化设备的性能及应用现状,提出不同规模的饮食业单位应选择的油烟净化技术.通过比较发现,静电油烟净化技术和静电复合式油烟净化技术是目前国内油烟净化技术的主流,并提出等离子体技术、催化燃烧技术是今后油烟净化的发展趋势.     

复合型除尘器除尘脱硫一体化工艺实验研究

试验研究了专利产品"高压静电滤槽复合型卧式除尘器"的除尘脱硫一体化工艺.试验表明,在布袋前方的末级电场中实行半干法脱硫工艺具有可行性,可达到除尘脱硫一体化目的.试验同时研究了钙硫比、脱硫灰循环率、饱和温距、喷水量和SO2浓度等对脱硫率的影响.该工艺适用于以低硫煤为燃料的锅炉进行除尘脱硫.     

电厂循环冷却排污水的回用研究

针对电厂循环冷却排污水的处理技术进行了中试研究.采用超滤、反渗透的工艺处理电厂循环冷却排污水,处理后的水能够满足低压锅炉补充水的要求.该工艺为循环冷却排污水的再利用开辟了一条新途径,既节约了水资源,又减少了环境污染.     

CdIn2S4/复合材料的制备及光降解罗丹明B

利用高压静电纺丝技术,制得含有羧基的导电聚合物纤维(聚偏氟乙烯/苯乙烯-马来酸酐共聚物/纳米石墨),高温水热条件下在纤维表面制备CdIn2S4颗粒,得到CdIn2S4/导电聚合物纤维复合材料。运用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、紫外-可见吸收光谱仪(UV-Vis)和热失重分析仪(TGA)对复合材料的结构进行表征。并利用350 W氙灯模拟太阳光进行光催化降解罗丹明B。结果发现,CdIn2S4/导电聚合物纤维复合材料的降解效率高于CdIn2S4粉体和Degussa P25 TiO2粉体,光催化降解3 h,罗丹明B的降解率为96.2%。     

GJX-~5/100型高压静电吸尘器介绍

浙江金华电子仪器厂生产的GJX-~5/_(100)型高压静电吸尘器,具有单通道、宽极距、超高压等特点.这种收尘器的收尘方法是:将含尘空气集中于收尘罩内,罩内悬挂一电晕极线,并通以高压直流电(一般收尘罩接正极,并良好接地.电晕线接负极与地要很好绝缘).利用电晕线周围的电晕放电,产生大量的、高速运动的电子与正负离子,去碰撞     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Comparison of methods for evaluation of activity of photocatalytic films

Objective

This work aims to investigate the correlation between the photocatalytic activity determined by methylene blue bleaching (DIN 52980), stearic acid degradation, and degradation of acetone in gas phase.

Method

The photocatalytic TiO₂ coatings included in this investigation ranged from thin commercially available coatings (Activ^TM and BioClean^TM) and ready to use suspensions (Nano-X PK1245) to lab-produced PVD and sol?Cgel coatings. XRD analysis of the photocatalytic coatings showed that all the coatings consisted of nanocrystalline anatase, although the thickness and porosity varied considerably.

Results

The study showed that the reproducibility of the activity measurements was good. However, more importantly, the investigation showed that there is a good correlation between the activities determined by the different methods even though the characteristics of the photocatalytic coatings and the organic probe molecules varied considerably.

Conclusion

The overall findings of this work suggest that there is a good correlation between the investigated methods. These results are promising for the future work concerning standardization of methods for determination of the activity of photocatalytic films.     

Impact of overexploitation of shellfish: northeastern coast of India

India has a very extensive coastline of about 7515 km, rich in diverse living resources. These resources continue to deteriorate with rampant harvesting or are altered for other uses such as aquaculture and fisheries. The present paper deals with degrading coastal habitats in northeastern India, and projects the intensity of the stress arising from the collection of tiger prawn seeds (Penaeus monodon) for aquacultural farms and molluskan shells for poultry feed and edible lime. Indiscriminate exploitation of these resources leads to a heavy reduction of the species concerned and other associated marine communities. The magnitude of such destruction has been quantified. The impacts of biodiversity loss and their after-effects on the ecobalance of this coastal system have become a matter of great concern to ecologists to maintain security and sustainability. The authors propose a public awareness program on themes relating to the importance of biodiversity for human livelihoods.