石油化工园区周边土壤中多环芳烃的分布研究

采集锦州市石油六厂工业区、交通运输区及农业区土壤,采用高效液相色谱/质谱联用仪分析测定土样中16种PAHs的总含量(∑PAHs):工业区均值为386.19μg/kg、交通运输区均值为328.54μg/kg、农业区均值为192.64μg/kg;致癌性PAHs的总含量(∑PAHscare):工业区均值为147.97μg/kg、交通运输区均值为131.52μg/kg、农业区均值为73.83μg/kg;不同功能区PAHs成分组成规律基本一致,PAHs以3环和4环为主,土壤中PAHs成分比例规律为4环>3环>2环>5环>6环;无论是土壤中∑PAHs还是∑PAHscare含量规律,都为工业区>交通运输区>农业区。工业区石油类污染较为严重,交通运输区及农业区土壤中PAHs污染主要来源于化石燃料的燃烧及农业用品的施用。     

淮安市典型地区土壤中多环芳烃污染调查

对淮安市5个区域土壤中多环芳烃(PAHs)污染状况进行了调查和分析,结果表明:被调查区域土壤中PAHs的平均质量比为1 641 μg/kg,城市附近区域--淮海南路旁农田、大运河畔城南农田、北京新村土壤中PAHs的质量比最高,分别为3 421 μg/kg、1 730 μg/kg和1 779 μg/kg,其污染特征因子为苊、菲、荧蒽、(艹屈)、茚并[1,2,3-c,d]芘、苯并[g,h,I]苝等;远离城市的区域--洪泽湖畔农田、洪泽湖大墩岛农田土壤中PAHs质量比较低,分别为716.3 μg/kg、560.9 μg/kg,污染特征因子为芴、苊、菲、(艹屈)等.     

某地农田土壤及其潜在污染源中多环芳烃检测与评价

通过对A、B两地农田土壤及其潜在污染源燃煤尘、交通尘和尾气尘等样品中多环芳烃(PAHs)的检测,结果表明,A、B两地土壤样品中∑PAHs范围分别为290 ng/g～2. 53× 10~3ng/g和564 ng/g～5. 50× 10~3ng/g,污染程度为中等—严重,且呈现出由工业园区周边土壤到化工企业周边土壤至油田周边土壤逐渐加重的趋势。A、B两地不同固体样品中∑PAHs由高到低分别为尾气尘交通尘燃煤尘土壤和尾气尘交通尘土壤燃煤尘。源解析表明,研究区土壤中PAHs受混合源(石油源和燃烧源)污染。燃烧源既有石油及其精炼产品的燃烧,又有木材、煤燃烧。     

天津城郊土壤中PAHs含量特征及来源解析

以天津市郊环城四区为研究对象,系统采集了环城四区95个表层土壤样品,利用高效液相色谱仪对16种PAHs进行分析测定,结果表明,西青、东丽、津南和北辰土壤中16种PAHs的总量范围分别为62.6～1 994.9、36.1～4 074.7、20.1～2 502.5、22.1～707.7μg/kg;平均含量分别为445.8、841.8、509.5、242.5μg/kg。四区中都以高环多环芳烃为主,西青、东丽、北辰和津南高环多环芳烃分别占多环芳烃总比例的45.4%、42.2%、38.8%和38.7%。空间分析的结果表明,靠近天津市市区样点土壤中多环芳烃的含量要明显高于远离市区土壤中多环芳烃的含量。利用环数PAHs的相对丰度和比值法对天津市郊环城四区土壤中多环芳烃的污染来源进行了解析,研究区土壤监测样点的PAHs主要来自燃烧源,少部分来自石油类来源或几种污染源的共同复合累加的作用。     

福建省茶园土壤中多环芳烃的分布、来源分析及生态风险评价

利用高效液相色谱分析技术对福建省茶园土壤中16种多环芳烃进行了定量分析,结果表明,PAHs的总量在0.622~812.0μg/kg之间,平均值为48.4μg/kg。其组成以3环的为主,4环次之,主成分分析和PAHs特征参数分析发现,福建省茶园土壤中多环芳烃主要以燃油、木柴和煤燃烧来源为主,部分样点存在油类排放污染。生态风险评价结果显示,福建省茶园土壤中多环芳烃已具有不利生物影响效应。     

某地区农田土壤中多环芳烃分布与来源解析

研究了某地区农田表层土壤中16种PAHs污染状况和来源。结果表明,研究区2012和2016年土壤中PAHs总平均值分别为1 748和3 248 ng/g,其值显著高于其他文献研究区。指出,研究区土壤已受到PAHs的污染,土壤中PAHs以3环、4环为主,Bb F、Ba P、Phe、Ba A、Fla、Pyr、Chr、Flu等质量比相对较高,其污染源主要为焦化、煤和天然气的燃烧,此外交通源对多环芳烃污染也有一定的贡献。     

株洲市区农业土壤中多环芳烃的分布特征研究

采集株洲市区农业土壤表层样品185个,用高效液相色谱法对16种多环芳烃(PAHs)进行检测结果表明,除萘外,其余15种PAHs均有不同程度的检出,以苯并[b]萤蒽、萤蒽和苯并菲等3或4环PAHs为主, ～5521μg/kg之间,平均280μg/kg.地域上,石峰区、芦淞区>天元区>荷塘区;从土地利用类型看,旱地>水田>林地.按Maliszewska-Kordybach土壤污染程度分级标准,株洲市区农业土壤总体上受到PAHs轻度污染,这些PAHs主要来源于工业生产、交通运输等过程中化石燃料的燃烧.     

乌鲁木齐土壤中多环芳烃的污染特征及生态风险评价

在乌鲁木齐地区不同功能区采集28个表层土壤样品,对土壤中多环芳烃(PAHs)的污染特征进行研究,并运用正定矩阵因子分析法对其来源进行分析,采用苯并[a]芘的毒性当量浓度(TEQBa P)对PAHs的生态风险进行评价。研究显示,土壤中∑16 PAHs含量为331~15 799μg/kg,其平均值为(5 018±4 896)μg/kg(n=28),以3环、4环为主。∑16PAHs的浓度呈现出交通区工业区公园区农业区居民商业区的变化趋势;正定矩阵因子分析法表明,乌鲁木齐表层土壤中PAHs的主要来源及贡献分别为煤的燃烧(51.19%),汽油车燃烧(19.02%),柴油车燃烧(18.35%),机动车石油的泄漏(11.42%);53%的采样点TEQBa P值超过荷兰土壤标准目标参考值,主要集中在交通区和工业区。     

GC-MS/MS法测定石油污染土壤中的多环芳烃

采用丙酮-正己烷混合溶液(体积比为1∶1)提取石油污染土壤样品中10种典型多环芳烃,用GC-MS/MS法测定。通过优化前处理和测定条件,使方法在0.100 mg/L～10.0 mg/L范围内线性良好,方法检出限为5.00μg/kg～15.8μg/kg。土壤样品加标回收试验6次测定结果的RSD为0.1%～16.6%,加标回收率为43.1%～109%。将该方法用于测定湖南某石化项目周边的实际土壤,结果表明该地区不同点位土壤中多环芳烃测定值为未检出～300μg/kg,在国家标准规定的范围内。     

某大型化工企业周边居民区积尘中多环芳烃调查及健康风险评价

以江苏省某大型化工企业周边居民区为研究区域,调查企业主导风的下风向2 km范围内的居民区以及对照区积尘中多环芳烃(PAHs)含量,对16种PAHs污染分布和特征进行研究,并评估积尘PAHs通过暴露途径对人群健康风险。结果表明:居民区积尘中16种PAHs全部检出,污染区∑PAHs均值为2 294μg/kg,明显高于对照区145μg/kg;污染区7个测点中有6个测点苯并(a)芘出现超标,超标倍数为0. 17～2. 5倍;所测的16种PAHs化合物中蒽、荧蒽、芘、、苯并(b)荧蒽、苯并(k)荧蒽、苯并(a)芘浓度相对较高;通过PAHs主成分分析和特征比值判断,不完全燃烧源对积尘中PAHs贡献率达77. 4%,污染区PAHs来源呈现石油燃烧、煤燃烧以及石油源的复合污染特征,对照区PAHs主要来源为煤的不完全燃烧;以苯并(a)芘毒性等效浓度进行风险评估,污染区致癌风险值明显高于对照区,儿童摄入PAHs风险总体高于成人;对照区儿童和成人致癌风险均小于1×10~(-6),不存在致癌风险;污染区儿童和成人平均致癌风险值分别为3. 95×10~(-6)、2. 65×10~(-6),在可接受范围内,但存在潜在致癌风险。     

城市空气质量周报效用分析

介绍了世界上一些发达国家的空气污染预报的做法和采取的措施，阐述了我国开展空气质量预报的方针和方法，指出了周报是预报的基础工作。叙述了我国空气质量周报的污染参数的选取、污染指数的分级及其浓度限值和污染指数计算及确定，分析并总结了开展城市空气质量周报所发挥的效用是提高公众的环保意识，加大了治理污染的力度，转变了环境监测的职能，促进了环境监测事业的发展     

锅炉烟尘测试中锅炉负荷率的计算方法探讨

GB5468 -91规定 ,锅炉烟尘测试时 ,必须对锅炉的运行负荷进行测试 ,而实际监测过程中 ,许多锅炉房不具备测试的计量条件 ,为了解决这一问题 ,文章提出利用烟气量和空气过剩系数计算锅炉负荷率。在实际监测工作中 ,该方法方便、易于操作 ,所得结果和标准规定方法所得结果有很好的一致性     

水中总硬度测量不确定度的评定

采用EDTA滴定法测定水质总硬度的测量不确定度评定。充分考虑测量重复性、标准溶液的配制、滴定等过程对测量的影响,计算水中总硬度的测量相对合成标准不确定度为1·81×10-3。     

实验室质量管理体系内部审核的实施

在实施GB/T15481-2000 idt ISO/IEC17025:1999标准《检测和校准实验室能力的通用要求》的过程中,通过实验室质量管理体系内部审核的实践与系统分析,识别出内部审核实施阶段的关键环节,提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法,对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

Fractionation of heavy metals and assessment of contamination of the sediments of Lake Titicaca

Chemical weathering is one of the major geochemical processes that control the mobilization of heavy metals. The present study provides the first report on heavy metal fractionation in sediments (8–156 m) of Lake Titicaca (3,820 m a.s.l.), which is shared by the Republic of Peru and the Plurinational State of Bolivia. Both contents of total Cu, Fe, Ni, Co, Mn, Cd, Pb, and Zn and also the fractionation of these heavy metals associated with four different fractions have been determined following the BCR scheme. The principal component analysis suggests that Co, Ni, and Cd can be attributed to natural sources related to the mineralized geological formations. Moreover, the sources of Cu, Fe, and Mn are effluents and wastes generated from mining activities, while Pb and Zn also suggest that their common source is associated to mining activities. According to the Risk Assessment Code, there is a moderate to high risk related to Zn, Pb, Cd, Mn, Co, and Ni mobilization and/or remobilization from the bottom sediment to the water column. Furthermore, the Geoaccumulation Index and the Enrichment Factor reveal that Zn, Pb, and Cd are enriched in the sediments. The results suggest that the effluents from various traditional mining waste sites in both countries are the main source of heavy metal contamination in the sediments of Lake Titicaca.     

“湖泛”恶臭物质分析及来源浅析

介绍了中国南方"湖泛"中的恶臭物质及检测情况,采用常规分析和气相色谱-质谱(GC-MS)对"湖泛"水样进行检测,认为"湖泛"恶臭物主要是氨和硫醚类物质。根据"湖泛"发生的时间及频次,结合南方地区农业水稻秧田的农药使用情况,推断氨基甲酸酯类农药的使用可能是"湖泛"发生的诱因。     

贵州黔东南州三板溪水库春季拟多甲藻水华特征

2011年3月13日对贵州省黔东南州三板溪水库进行春季浮游植物调查的结果表明,三板溪水库Ⅱ号采样点(下革东)发生以佩纳形拟多甲藻为优势种的拟多甲藻水华,细胞密度高达1.15×10⁷cell/L;板溪水库总氮的最低值为2.09 mg/L,总磷的最低值为0.95 mg/L,三板溪水库的总氮、总磷含量较丰富,不存在总氮或总磷是限制性因子;通过SPSS16.0统计软件分别进行Pearson 积距相关系数分析表明,氮磷比是三板溪水库发生拟多甲藻水华的主要影响原因。     

Environmental Assessment of the Impact of Ozone to the Neuston of the Sea-Surface Microlayer of the Gulf of Mexico

Substantial amounts of NOx (146 000 t/y) and total hydrocarbons (294 000 t/y) are released to the marine atmosphere by the large number of oil and gas operations over Federal waters of the Gulf of Mexico (GOM). Under appropriate meteorological conditions these emissions react to form ozone (0–54 g/m3 over-water) which can affect the marine environment. Using a dry deposition model, this work examines the amount of ozone derived from oil and gas offshore operations and deposited in the sea surface of the Gulf of Mexico, and assesses its impact on the neuston of the sea-surface microlayer. Surface integrated estimates of ozone deposited from oil and gas operations over the sea surface ranges from 400 kg to 1800 kg which results in sea surface concentrations of 15 g/m3. This estimate and the actual toxic ozone levels suggest no acute, toxic impacts to the neuston. However, indirect effects may occur through changes to the pelagic foodwebs and organic carbon pathways. Another potential pathway for ozone impacting the environment is through the production of bromate. Based on the concentrations and time scales (11–139 days) only sublethal effects appear to occur, but uncertainties associated with this assessment need to be further studied. From an ecological perspective, the environmental impacts and risks of NOx and VOC discharges from offshore platforms need to be assessed for neuston and other components of the marine ecosystem.     

Evaluation of method of preparation of passive diffusion tubes for measurement of ambient nitrogen dioxide

This study was carried out in response to suggestions that the measurement of NO(2) by Palmes-type passive diffusion tubes (PDT) is affected by the method of preparation of the triethanolamine (TEA) absorbent coating on the grids. The following combinations of factors were investigated: TEA solvent (acetone or water), volume composition of TEA in solvent (50% or 20%), and grid coating method (dipping in solution prior to assembly or pipetting solution on after assembly). Duplicate PDTs prepared by each of the 8 methods were exposed in parallel, in urban air, for a total of 80 separate 1 week exposures. NO(2) concentrations derived from PDTs prepared by pipetting methods were significantly less precise than concentrations from dipping methods, with mean RSDs for duplicate measurements of 13.8% and 8.5%, respectively (n= 316 each category). Pipetting methods using solutions of 50% TEA composition were particularly imprecise (mean RSD 17.2%). Data from PDTs prepared by pipetting methods were systematically more poorly correlated with each other and with data from co-located chemiluminescence analysers, than corresponding data from PDTs prepared by dipping methods, indicating that more consistent accuracy was also obtained by the latter PDTs. The statistical evidence suggested that PDTs prepared by pipetting 50% TEA in water generally gave lower NO(2) concentrations. Although this is in agreement with a previous study, it is also possible that such an observation here may be a statistical artefact given the demonstrably poorer precision of this method. The general tendency of PDTs to show positive bias in NO(2) measurement in urban air in 1 week exposures was again evident in this study (mean biases at roadside and urban centre locations of +35% (n= 475) and +18% (n= 112), respectively) consistent with augmentation of within-tube NO(2) flux by chemical reaction between co-diffusing NO and O(3). Overall, it is recommended that the pipetting method of PDT grid preparation is avoided, or at least investigated further, because of the apparent degradation in precision and accuracy of NO(2) measurement. Potential reasons for the effect are discussed.     

实验室质量管理体系内部审核的策划

在实施GBT15481-2000(idtISOIEC17025:1999)标准《检测和校准实验室能力的通用要求》的过程中,通过实验室质量管理体系内部审核的实践与系统分析,识别出内部审核策划阶段的关键环节,提出审核范围确定、审核计划和抽样方案制订的技术方法,为有序高效地实施内部审核提供了行动指南。