Comparison of Numerical Street Dispersion Models with Results from Wind Tunnel and Field Measurements

Numerical dispersion models developed and validated in different European countries were applied to data sets from wind tunnel and field measurements. The comparison includes the Danish Operational Street Pollution Model (OSPM) and the microscale flow and dispersion model MISKAM. The latter is recommended for application in built-up areas in the draft of the new German guideline VDI 3782/8. In a first step the models were applied to simplified street configurations. Different parameters as length and height of adjacent buildings and the angle of the incoming flow were varied. The results were compared to recent wind tunnel measurements. In a second step the models were applied to two extensively investigated field data sets from Jagtvej, Copenhagen and G ttinger Straße, Hannover. Intensified and more transparent and accessible validation procedures would be helpful for the thorough user.     

Measurements and Modelling of Air Pollution in a Street Canyon in Helsinki

A measuring campaign was conducted in the street canyon 'Runeberg street' in Helsinki in 1997. Hourly concentrations of carbon monoxide (CO), nitrogen oxides (NO_X), nitrogen dioxide (NO₂) and ozone (O₃) were measured at the street and roof levels, and the relevant hourly meteorological parameters were measured at the roof level. The hourly street level measurements and on-site electronic traffic counts were conducted during the whole year 1997, and roof level measurements were conducted during approximately two months, from 3 March to 30 April in 1997. The Operational Street Pollution Model (OSPM) was used to calculate the street concentrations and the results were compared with the measurements. The overall agreement between measured and predicted concentrations was good for CO and NO_x, but the model slightly overestimated the measured concentrations of NO₂. The database, which contains all measured and predicted data, is available for a further testing of other street canyon dispersion models.     

An Integrated Approach to Street Canyon Pollution Modelling

An integrated method for the prediction of the spatial pollution distribution within a street canyon directly from a microscopic traffic simulation model is outlined. The traffic simulation package Paramics is used to model the flow of vehicles in realistic traffic conditions on a real road network. This produces details of the amount of pollutant produced by each vehicle at any given time. The authors calculate the dispersion of the pollutant using a particle tracking diffusion method which is superimposed on a known velocity and turbulence field. This paper shows how these individual components may be integrated to provide a practical street canyon pollution model. The resulting street canyon pollution model provides isoconcentrations of pollutant within the road topography.     

Evaluation of the Operational Street Pollution Model Using Data from European Cities

This paper presents a sensitivity analysis and an evaluation of the semi-empirical model known as Operational Street Pollution Model (OSPM). The model is capable of calculating airborne concentrations of exhaust gases emitted by vehicles, within a street canyon. OSPM has been extensively evaluated using data collected over a two year period (1994–1995), during a monitoring campaign carried out in Jagtvej, Denmark. Further evaluation of the model was carried out using data collected in Göttinger Strasse, Hannover (1994) and Schildhorn Strasse, Berlin (1995), both in Germany. In all cases, model runs were carried out for carbon monoxide.Two sets of emission factors were used for the two street canyons in Germany; namely that available within OSPM and another separate set of emission factors derived from data collected in Germany. In the calculation of the latter set, the urban driving patterns and variations in the vehicle fleet composition according to the engine capacity were assumed accordingly. A correlation coefficient of 0.90 between the modelled and measured concentrations was obtained for all the cases considered when using the emission factors of OSPM. A correlation coefficient of about 0.85 was obtained with the newly proposed emission factors when applied to Göttinger and Schildhorn Strasse.     

Modelling Tracer Dispersion from Landfills

Several wind tunnel experiments of tracer dispersion from reduced-scale landfill models are presented in this paper. Different experimental set-ups, hot-wire anemometry, particle image velocimetry and tracer concentration measurements were used for the characterisation of flow and dispersion phenomena nearby the models. The main aim of these experiments is to build an extensive experimental data set useful for model validation purposes. To demonstrate the potentiality of the experimental data set, a validation exercise on several mathematical models was performed by means of a statistical technique. The experiments highlighted an increase in pollutant ground level concentrations immediately downwind from the landfill because of induced turbulence and mean flow deflection. This phenomenon turns out to be predominant for the dispersion process. Tests with a different set-up showed an important dependence of the dispersion phenomena from the landfill height and highlighted how complex orographic conditions downwind of the landfill do not affect significantly the dispersion behaviour. Validation exercises were useful for model calibration, improving code reliability, as well as evaluating performances. The Van Ulden model proved to give the most encouraging results.     

Assessment of a General Finite Line Source Model and CALINE4 for Vehicular Pollution Prediction in Ireland

A comparative evaluation of two Gaussian-based line source models namely, California line source dispersion model version 4 and the general finite line source model, is presented. The concentrations predicted by these models are compared with background-corrected ambient concentrations measured at three different distances from a motorway and performance of both models assessed in the context of integrated transport–environment modelling for regulatory purposes.     

Numerical simulation on pollutant dispersion from vehicle exhaust in street configurations

The impact of the street configurations on pollutants dispersion from vehicles exhausts within urban canyons was numerically investigated using a computational fluid dynamics (CFD) model. Three-dimensional flow and dispersion of gaseous pollutants were modeled using standard kappa - epsilon turbulence model, which was numerically solved based on Reynolds-averaged Navier-Stokes equations by the commercial CFD code FLUENT. The concentration fields in the urban canyons were examined in three cases of street configurations: (1) a regular-shaped intersection, (2) a T-shaped intersection and (3) a Skew-shaped crossing intersection. Vehicle emissions were simulated as double line sources along the street. The numerical model was validated against wind tunnel results in order to optimize the turbulence model. Numerical predictions agreed reasonably well with wind tunnel results. The results obtained indicate that the mean horizontal velocity was very small in the center near the lower region of street canyon. The lowest turbulent kinetic energy was found at the separation and reattachment points associated with the corner of the down part of the upwind and downwind buildings in the street canyon. The pollutant concentration at the upwind side in the regular-shaped street intersection was higher than that in the T-shaped and Skew-shaped street intersections. Moreover, the results reveal that the street intersections are important factors to predict the flow patterns and pollutant dispersion in street canyon.     

The Draft of the New German Guideline VDI 3782/8 to Model Automobile Exhaust Dispersion

The draft of the German guideline to calculate automobile exhaust dispersion is explained. It contains a two-stage-system: For first quick estimates the guideline contains the simple models MLuS and STREET. In case these models are not applicable or their results shows concentration levels close to the air quality standards, the more complex models PROKAS_V and MISKAM are recommended. PROKAS_V is a Gaussian plume model, MISKAM is a 3-dimensional microscale non hydrostatic flow model for built-up areas with an Eulerian dispersion model. The guideline comprises cases in rural areas without or with few adjacent buildings as well as urban areas with buildings near the roads. The contribution gives information about the models, typical results and some of the problems showing up presently.     

Flow and Pollutant Dispersion in Street Canyons using FLUENT and ADMS-Urban

This paper is devoted to the study of flow within a small building arrangement and pollutant dispersion in street canyons starting from the simplest case of dispersion from a simple traffic source. Flow results from the commercial computational fluid dynamics (CFD) code FLUENT are validated against wind tunnel data (CEDVAL). Dispersion results from FLUENT are analysed using the well-validated atmos pheric dispersion model ADMS-Urban. The k − ε turbulence model and the advection-diffusion (AD) method are used for the CFD simulations. Sensitivity of dispersion results to wind direction within street canyons of aspect ratio equal to 1 is investigated. The analysis shows that the CFD model well reproduces the wind tunnel flow measurements and compares adequately with ADMS-Urban dispersion predictions for a simple traffic source by using a slightly modified k − ε model. It is found that a Schmidt number of 0.4 is the most appropriate number for the simulation of a simple traffic source and in street canyons except for the case when the wind direction is perpendicular to the street canyon axis. For this last case a Schmidt number equal to 0.04 gives the best agreement with ADMS-Urban. Overall the modified k − ε turbulence model may be accurate for the simulation of pollutant dispersion in street canyons provided that an appropriate choice for coefficients in the turbulence model and the Schmidt number in the diffusion model are made.     

Multipoint source method in air pollution modelling of cold start emission

The paper presents a new method of air pollution modelling on a micro scale. For estimation of concentration of car exhaust pollutants, each car is treated as an instantaneous moving emission source. This approach enables us to model time and spatial changes of emission, especially during cold and cool start of an engine. These stages of engine work are a source of significant pollution concentration in urban areas. In this work, two models are proposed: one for the estimation of emission after cold start of the engine and another for the prediction of pollutant concentration. The first model (defined for individual exhaust gas pollutants) enables us to calculate the emission as a function of time after the cold or cool start, ambient temperature and average speed of motion. This model uses the HBEFA database. The second mathematical model is developed in order to calculate the pollutant dispersion and concentrations. The finite volume method is applied to discretise the set of partial differential equations describing wind flow and pollutant dispersion in the domain considered. Models presented in this paper can be called short-term models on a small spatial scale. The results of numerical simulation of pollutant emission and dispersion are also presented.