Industrial pollution transport. Part 2. Control of industrial emissions

Solutions of the pollution transport problem and its adjoint are used to monitor mean pollution concentration in an ecologically important zone. Four strategies of control over pollutants released into the atmosphere by industrial plants are suggested. They differ by the restrictions imposed on the emission rate of each plant. All the strategies use solutions of the adjoint transport problem and assure the fulfillment of the sanitary norm in the zone. A linear interpolation of these strategies also brings pollution level in the zone down to the sanitary norm. A method of detecting the plants violating the prescribed emission rates is also given. A simple example is given to illustrate the strategies suggested.     

Air Pollution Estimates in Guadalajara City

A method for estimating the impact of industrial emissions is suggested and applied to the Guadalajara City Metropolitan Area (GCMA). The method is based on solutions to the pollution transport model and its adjoint. Two equivalent direct and adjoint mean pollution concentration estimates are considered for ecologically important zones of the GCMA. The dependence of these estimates on the number, positions and emission rates of industrial plants, as well as on the wind and initial pollution distribution in the GCMA is qualitatively and quantitatively examined. It is shown that the adjoint model solutions serve as the influence functions providing valuable information on the role of each of the industrial plants in polluting different zones within the GCMA. These solutions have been calculated with a balanced and absolutely stable second-order finite-difference scheme based on the splitting method. A method for an optimal allocation of a new industrial plant is considered.     

Application of Adjoint Approach to Oil Spill Problems

Adjoint method is applied to various oil spill problems. A three-dimensional model for describing the dispersion of a quasi-passive substance (a pollutant or a nutrient) and its adjoint model are considered in a limited sea region. Direct and adjoint estimates are used to get dual (equivalent) estimates of the mean concentration of the substance in important zones of the region. The role of dual estimates is illustrated with a few examples. They include such oil spill problems as the search of the most dangerous point of the oil tanker route, the oil dispersion with a climatic velocity, and the dependence of the oil concentration estimates on the oil spill rate. One more example is the application of optimal bioremediation strategy for cleaning a few zones polluted by oil. In this case, instead of oil, the model describes the dispersion of a nutrient released to marine environment. Balanced, unconditionally stable second-order finite-difference schemes based on the splitting method for the solution of the dispersion model and its adjoint are suggested. The main and adjoint difference schemes are compatible in the sense that at every fractional step of the splitting algorithm, the one-dimensional split operators of both schemes satisfy a discrete form of Lagrange identity. In the special unforced and non-dissipative case, each scheme has two conservation laws. Every split one-dimensional problem is solved by Thomas’ factorization method.     

A Linear-Programming-Based Strategy for Bioremediation of Oil-Polluted Marine Environments

A linear programming problem is considered with the aim to determine the optimal discharge point and the optimal discharge rate of a nutrient to be released to a marine environment polluted with oil. The objective is to minimize the total discharge of nutrient into the system provided that the concentrations of nutrient will reach critical values sufficient to eliminate oil residuals in certain affected zones through bioremediation. An initial boundary-value 3D problem for the advection–diffusion equation and its adjoint problems are considered to model, estimate, and control the dispersion of nutrient in a limited region. It is shown that the advection–diffusion problem is well posed, and its solution satisfies the mass balance equation. In each oil-polluted zone, the mean concentration of nutrient is determined by means of an integral formula in which the adjoint model solution serves as a weight function. Critical values of these mean concentrations are used as the constraints of linear programming problem. Some additional constraints are posed in order to limit not only the local discharge of the nutrient, but also the mean concentration of this substance in the whole region. Both constraints serve for environmental protection. The ability of the new method is demonstrated by numerical experiments on the remediation in oil-polluted channel using three control zones. The experiments show that the optimal discharge rate can always be got with a simple combination of step functions.     

Mixed Integer Linear Programming Models for Selecting Ground-Level Ozone Control Strategies

The traditional strategy for ground-level ozone control is to apply emission reductions across the board throughout certain time periods and locations. In this paper, we study various mixed integer linear programming (MILP) models that seek to select targeted control strategies for the Dallas Fort-Worth (DFW) region to reduce emissions, in order to achieve the State Implementation Plan (SIP) requirements with minimum cost. Statistics and optimization methods are used to determine a potential set of cost-effective control strategies for reducing ozone. These targeted control strategies are specified for different types of emission sources in various time periods and locations. Three MILP models, a static model, a sequential model, and a dynamic model, are studied in this research. These different MILP models allow decision makers to study how the targeted control strategies change under different circumstances. Meanwhile, two types of auxiliary variables are considered as supplemental control strategies in the optimization if the current set of control strategies is unable to reduce ozone to comply with the 8-h ozone standard. Results from the different models can provide decision makers with information concerning how the effectiveness of the control strategies varies with daily emission patterns and meteorology.     

唐山市钢铁行业大气污染物排放清单建立

以唐山市钢铁企业为研究对象,在收集已有排放源数据的基础上,基于排放因子和活动水平数据采用排放因子法估算了唐山市钢铁企业多个大气污染物的排放量,得到了符合空气质量模型要求的污染源输入数据,建立钢铁行业和主要防控因子污染源数据库。结合唐山市各县区的环境空气质量状况,利用GIS技术,将不同污染因子的排放进行空间分布,最终形成准确完善的多尺度、高时空分辨率大气污染源排放清单。研究介绍了符合中国特色的区域高分辨率大气排放源清单建立的方法体系,为京津冀地区区域大气污染联防联控及2020年大气污染物区域削减计划工作提供数据支撑。     

Mathematical Modeling and Numerical Algorithms for Simulation of Oil Pollution

This paper deals with the mathematical modeling and algorithms for the problem of oil pollution. For solving this task, we derive the adjoint problem for the advection–diffusion equation describing the propagation of oil slick after an accident, which we call the main problem. We prove a fundamental equality between the solutions of the main and the adjoint problems. Based on this equality, we propose a novel method for the identification of the pollution source location and the accident time of oil emission. This approach is illustrated on an example for an accident in the offshore of the central part of the Vietnamese coast. Numerical simulations demonstrate the effectiveness of the proposed method. Besides, the method is verified for 1D model of substance propagation.     

Air quality monitoring for multiple pollutants: Optimization of a network around a hypothetical potash plant and two thermal power stations in open countryside

A method is presented for the design of multi-pollutant air quality monitoring networks (AQMN). This technique leads to an optimal network, i.e. a network providing a maximum of information with a minimum of measurement devices. The spatial correlation analysis technique is used to compare the information given by the potential sites that may form the network. The concept of potential of violation is defined to take into account the number of times that the maximum emission values tolerated by law are exceeded. Both objectives are weighted automatically through an adjustable parameter, b, for which an estimation procedure has been developed in this study, depending on the purpose of the network. Several methods are described, allowing simultaneous consideration of different pollutants. As an illustration of these methods, a number of air quality monitoring networks is designed to perform an analysis of the environmental impact due to a hypothetical potash processing plant and two thermal power stations.     

A process-based model on methane emission with its oxidation process from rice fields and corresponding control indices

In this paper, a mathematical model is developed for net methane emission from rice fields by coupling methane production model with methane oxidation model. Several dynamical regimes were formed through qualitative analysis of the model, and corresponding dynamic features were interpreted through emission indices. Sensitivity of the model is discussed under the effects of temperature and oxygen concentration in methanogenic and methane oxidation phases, respectively, and interpreted by defining an index; in addition, control parameters are identified and their threshold limits defined. The out-busting emission tendency of methane is considered separately and a forcing strategy was defined to force emission level towards zero in the long term. Lastly, a complete control strategy is proposed for reducing methane emission.     

Screening organic chemicals in commerce for emissions in the context of environmental and human exposure

Quantitative knowledge of organic chemical release into the environment is essential to understand and predict human exposure as well as to develop rational control strategies for any substances of concern. While significant efforts have been invested to characterize and screen organic chemicals for hazardous properties, relatively less effort has been directed toward estimating emissions and hence also risks. Here, a rapid throughput method to estimate emissions of discrete organic chemicals in commerce has been developed, applied and evaluated to support screening studies aimed at ranking and identifying chemicals of potential concern. The method builds upon information in the European Union Technical Guidance Document and utilizes information on quantities in commerce (production and/or import rates), chemical function (use patterns) and physical-chemical properties to estimate emissions to air, soil and water within the OECD for five stages of the chemical life-cycle. The method is applied to 16,029 discrete substances (identified by CAS numbers) from five national and international high production volume lists. As access to consistent input data remains fragmented or even impossible, particular attention is given to estimating, evaluating and discussing uncertainties in the resulting emission scenarios. The uncertainty for individual substances typically spans 3 to 4 orders of magnitude for this initial tier screening method. Information on uncertainties in emissions is useful as any screening or categorization methods which solely rely on threshold values are at risk of leading to a significant number of either false positives or false negatives. A limited evaluation of the screening method's estimates for a sub-set of about 100 substances, compared against independent and more detailed emission scenarios presented in various European Risk Assessment Reports, highlights that up-to-date and accurate information on quantities in commerce as well as a detailed breakdown on chemical function are critically needed for developing more realistic emission scenarios.     

Industrial pollution transport. Part 1. Formulation of the problem and air pollution estimates

A pollution transport problem is formulated in a limited area. As the pollution sources we take emissions from industrial plants. Physically and mathematically suitable conditions are prescribed on the open boundaries. We show that the problem (as well as its adjoint) is well posed in the sense that a weak solution exists, is unique and depends continuously on its data. Direct and adjoint estimates of the average pollution concentration in an ecologically important zone are given, and the sensitivity of these estimates to perturbations in model parameters is analyzed.     

On the optimal control of carbon dioxide emissions: an application of FUND

This paper presents the Climate Framework for Uncertainty, Negotiation and Distribution (FUND), an integrated assessment model of climate change, and discusses selected results. FUND is a nine‐region model of the world economy and its interactions with climate, running in time steps of one year from 1990 to 2200. The model consists of scenarios for economy and population, which are perturbed by climate change and greenhouse gas emission reduction policy. Each region optimizes its net present welfare. Policy variables are energy and carbon efficiency improvement, and sequestering carbon dioxide in forests. It is found that reducing conventional air pollution is a major reason to abate carbon dioxide emissions. Climate change is an additional reason to abate emissions. Reducing and changing energy use is preferred as an option over sequestering carbon. Under non‐cooperation, free riding as well as assurance behaviour is observed in the model. The scope for joint implementation is limited. Under cooperation, optimal emission abatement is (slightly) higher than under non‐cooperation, but the global coalition is not self‐enforcing while side payments are insufficient. Optimal emission control under non‐cooperation is less than currently discussed under the Framework Convention on Climate Change, but higher than observed in practice. This revised version was published online in July 2006 with corrections to the Cover Date.     

铅蓄电池企业废气中铅及其化合物便携式XRF检测方法

在企业污染源现场实现污染物排放浓度水平的快速判定和超标风险筛查,对生态环境管理部门提高执法效率、企业提高环境管理水平意义重大。铅是一种对人体危害极大的有毒重金属,目前缺少含铅废气中铅及其化合物的便携式直读检测设备和检测方法。探索性地将X射线荧光光谱(XRF)法应用于铅蓄电池企业含铅废气中铅及其化合物的便携式快速、直读检测。研究结果表明,基于XRF的面密度法适用于铅蓄电池企业含铅废气处理设施后铅及其化合物的快速、直读检测,相对国标方法具有快速、直读、对样品无损、便于复测等特点,可用于铅及其化合物排放浓度水平的快速判定和超标风险筛查。     

Comparison of two dynamic measurement methods of odor and odorant emission rates from freshly dewatered biosolids

Odor and odorant emission rates from freshly dewatered biosolids in a dewatering building of a Water Reclamation Plant (WRP) are measured using the EPA flux chamber and wind tunnel methods. Experimental results are compared statistically to test whether the two methods result in similar emission rates when experiments are performed under field conditions. To the best of our knowledge the literature is void of studies comparing the two methods indoors. In this paper the two methods are compared indoors where the wind velocity and air exchange rate are pertinent field conditions and can be measured. The difference between emission rates of odor and hydrogen sulfide measured with the two methods is not statistically significant (P values: 0.505 for odor, 0.130 for H(2)S). It is concluded that both methods can be used to estimate source emissions but selection of the most effective or efficient method depends on prevailing environmental conditions. The wind tunnel is appropriate for outdoor environments where wind effects on source emissions are more pronounced than indoors. The EPA flux chamber depends on the air exchange rate of the chamber, which simulates corresponding conditions of the indoor environment under investigation and is recommended for estimation of indoor pollution sources.     

An Oligopoly Game of CDR Strategy Deployment in a Steady-State Net-Zero Emission Climate Regime

In this paper, we propose a simple oligopoly game model to represent the interactions between coalitions of countries in deploying carbon dioxide removal (CDR) strategies in a steady-state net-zero emission climate regime that could take place by the end of the twenty-first century. The emission quotas and CDR activities obtained in the solution of this steady-state model could then be used as a target for end-of-period conditions in a dynamic integrated assessment analysis studying the transition to 2100. More precisely, we analyze a steady-state situation where m coalitions exist and behave as m players in a game of supplying emission rights on an international emission trading system. The quotas supplied by a coalition must correspond to the amount of CO₂ captured through CDR activities in the corresponding world region. We use an extension of the computable general equilibrium model GEMINI-E3 to calibrate the payoff functions and compute an equilibrium solution in the noncooperative game.

     

Air quality assessment of Estarreja, an urban industrialized area, in a coastal region of Portugal

Despite the increasing concern given to air quality in urban and industrial areas in recent years, particular emphasis on regulation, control, and reduction of air pollutant emissions is still necessary to fully characterize the chain emissions–air quality–exposure–dose–health effects, for specific sources. The Estarreja region was selected as a case study because it has one of the largest chemical industrial complexes in Portugal that has been recently expanded, together with a growing urban area with an interesting location in the Portuguese coastland and crossed by important road traffic and rail national networks. This work presents the first air quality assessment for the region concerning pollutant emissions and meteorological and air quality monitoring data analysis, over the period 2000–2009. This assessment also includes a detailed investigation and characterization of past air pollution episodes for the most problematic pollutants: ozone and PM10. The contribution of different emission sources and meteorological conditions to these episodes is investigated. The stagnant meteorological conditions associated with local emissions, namely industrial activity and road traffic, are the major contributors to the air quality degradation over the study region. A set of measures to improve air quality—regarding ozone and PM10 levels—is proposed as an air quality management strategy for the study region.     

基于地基监测的人为源温室气体排放通量反演研究进展

不同尺度下温室气体的空间分布及变化趋势是研究气候变化的基础,也是评估相关减排政策实施效果的重要依据。当前碳排放核算主要基于排放清单,不确定性较大。基于监测数据的碳排放核算能够有效评估和修正排放清单结果,是对当前方法的有效补充。国内温室气体的监测主要针对污染源和环境浓度,对于人为源温室气体排放通量的监测研究较少。该文分析了近年来国内外基于地基监测的人为源温室气体排放通量研究,主要的研究方法可分为2类:柱浓度空间分布结合三维风场数据反演排放通量;结合实测体积分数、大气扩散模型和统计优化模型修正先验排放通量结果,以获取更准确的后验排放通量。通过分析和对比2种方法的优势和局限,讨论不同通量反演方法的适用场景。建议我国未来应构建适用于不同空间尺度的温室气体通量监测反演体系,综合利用多种监测手段,以校核验证排放清单,并为制定温室气体减排策略和评估应对气候变化工作成效提供技术支撑。     

利用后向轨迹模式研究上海市PM2.5来源分布及传输特征

利用后向轨迹模型，结合上海 PM2．5的浓度数据计算了2012年6月27日-2013年6月26日以上海为起始点的后向轨迹，并通过轨迹相关的分析方法，研究不同来源区域对上海 PM2．5浓度的贡献影响。结果表明：长三角地区的排放对上海的贡献最为显著；苏北、山东等地区的排放对上海也有较明显的贡献；来自海面的贡献总体低于大陆。所采用的轨迹多元回归分析法为 PM2．5的来源分布及传输特征研究提供了新思路。     

Validation of Urban Emission Inventories

Two emission validation methods are presented. The first method focuses on the precision of the emission factors and the accuracy of modelled traffic flows. Emission factors derived from the COPERT II methodology are compared with on-board emission measurements and modelled traffic flow rates are compared with observations. The second validation method focuses on the completeness of the inventory, i.e. coverage of all sources. The method compares measured pollutant fluxes in the urban plume with the downwind transported and dispersed emissions integrated over plume width and mixing height. Both methods seem to indicate that traffic emission factors used in the urban emission inventories show large uncertainties. Besides the lack of measurement precision this is mainly induced by external influence factors like driving behaviour and vehicle maintenance.     

A Mathematical Model for the Effects of Fertilization on Nitrogen Concentrations in Unsaturated Soil on Blueberry Farms in Southern New Jersey

Nitrogen is commonly known as a food source for crops. However, the nitrogen compounds used in crop fertilizers, most commonly nitrate (NO₃) and ammonium (NH₄), are not widely understood. Blueberry plants do not take up these compounds as efficiently as organic nitrogen so varying amounts of leaching into the soil and groundwater will occur. A biogeochemical model consisting of ordinary and partial differential equations is implemented to computationally predict the concentrations of nitrate and ammonium in unsaturated soil of blueberry plants, specifically in the southern region of New Jersey. The model takes into account the type of soil of the region, the nitrate uptake of the plant, the water content in the roots region, the pressure heads in the soil pores, and the application rates of fertilizers containing nitrate, ammonium, and organic nitrogen. Computational simulations demonstrate that the model accounts for natural processes and, in addition, show that commonly used fertilizer application rates cause unnecessarily high concentrations of both nitrate and ammonium in the unsaturated soil level. Further, simulations show that decreasing nitrate fertilizer applications by 85.7% in annual and 91.8% in bi-annual schedules provides an optimal system for safe reapplication.