Comparability between PM2.5 and particle light scattering measurements

Particle light scattering and PM_2.5 (particles with aerodynamic diameters less than 2.5 m) concentration data from air quality studies conducted over the past ten years wereexamined. Fine particle scattering efficiencies were determinedfrom statistical relationships among measured light scattering and fine and coarse mass concentrations. The resulting fine particle scattering efficiencies ranged from 1.7 m² g^-1at Meadview in the Grand Canyon to over 5 m² g^-1 in Mexico City. Most of the derived fine scattering efficiencieswere centered around 2 m² g^-1, which is considerablylower than most values reported from previous studies.     

Atmospheric Dust Loads and Their Elemental Composition at a Background Site in India

Air particulate samples collected during 1995–96 ata background site situated on the east coast of Thar Desert inRajsthan State of India were analysed for atmospheric dustloads (Suspended Particulate Matter) and elemental composition.The values of SPM ranged from 9 g M^-3 to 97g M^-3 with an average of 43 g M^-3 except a fewepisodic values, which were 3 to 5 times higher than the averageduring summer months. The results for elemental composition ofthe particulate samples showed that the concentrations ofanthropogenic toxic trace elements viz. Br, Cr, Pb, Sb, Se and Znare lower by a factor of 2 to 10 as compared to urban areas. Thehigh enrichment factors for anthropogenic elements viz. Br, Pb,Sb and Zn show an input from coal/wood fuel burning andvehicular pollution at the sampling site. The depletion of Si inSPM samples shows long distance transport of dust to the samplingsite.     

Measurements of Ozone Concentrations in Zagreb

Ozone concentrations were measured in Zagreb at four sites from May 1999 to April 2001 in order to categorize the air quality with respect to ozone. In the summer of 2000, the ozone measurements were also extended to four sites in the suburbs of Zagreb. Methods of active and passive sampling with nitrite ion as a reagent were used. In the northern part of the town ozone was analyzed by an automatic device. Automatic device measurements in the years 1999 and 2000 showed that hourly averages of ozone concentrations did not exceed the Croatian recommended value of the 98th percentile (180 g m^–3). Over the two-year period, 24-h averages occasionally exceed 110 g m^–3 in city center and in the northern part of the town. Regardless of these isolated examples, ozone was well within acceptable concentrations. Ozone concentrations measured in summer 2000 were higher in the suburbs of Zagreb than in the city. The 98th percentile values higher than 110 g m^–3 were recorded at three sites.     

Interpretation of roadside PM10 monitoring data from Sunderland,United Kingdom

Roadside PM₁₀ has been monitored by Partisol® at three sitesin Sunderland between August 1997 and February 1998. The sites chosen were an inner city kerbside site; a roadside site adjacentto a dual carriageway on the outskirts of Sunderland with an openaspect; and a rural site.The results indicate that there is a seasonal variation in the relationship between the sites in terms of monitored PM₁₀.In the winter there is a poor correlation between the sites whereas in the summer significant correlations are obtained. Of the sites monitored PM₁₀ is consistently highest at the inner city roadside site. During the summer, exceedances of theU.K. 50 g m^-3 standard (DETR, 2000) are associated with conditions suitable for the build-up of photochemical pollutionhowever during the winter period exceedances are recorded duringa variety of weather conditions.At the dual carriageway site PM_2.5 has also been recorded and contributions to measured PM₁₀ are 77% in summer and68% in winter. The results illustrate a number of inconsistencies between this study utilising the Partisol® andothers reporting results where PM₁₀ has been monitored by TEOM®.     

Roadside Concentration of Gaseous and Particulate Matter Pollutants and Risk Assessment in Dar-Es-Salaam, Tanzania

This study used manual air sampling method to assess the contribution of road traffic to air pollution level in Dar-es-Salaam City, Tanzania. Samples were collected from 11 different sites. Parameters measured were: sulphur dioxide using pararosaniline method, nitrogen dioxide using saltzman method, particulate matter and particulate lead using filtration method and atomic absorption spectrometric method, respectively. Results showed that hourly average sulphur dioxide concentration range from 127 to 1385 g/m³. The measured values of sulphur dioxide were above the recommended WHO guidelines with an hourly objective value of 350 g/m³ at 87% of the sampling sites. The hourly average nitrogen dioxide concentration ranged from 18 to 53 g/m³. The maximum hourly nitrogen dioxide concentration at 53 g/m³ was below the WHO guideline value of 200 g/m³. The hourly average suspended particulate matter (SPM) ranged from 98 to 1161 g/m³, exceeding the recommended value of 230 g/m³ by WHO at 87% of the sampling sites. The hourly average lead concentration was found to range from 0.60 to 25.6 g/m³, exceeding again the WHO guideline value of 1.5 g/m³at 83% of the sampling sites. Results predicted by Gaussian model when compared with the measured values were found to have a correlation coefficient of 0.8, signifying a good correlation. The risk assessment was undertaken considering the people who spend a significant portion of their time near the roads, such as the Uhuru primary school pupils and the adult population who reside by the roadside. The unit risk realised was 18.2 × 10^–6 for adult population and 2.2 × 10^–6 for pupils, both scenarios showing risk higher than the United Sates of America Environmental Protection Agency (USEPA) acceptable limit of 1× 10^–6. Considering the magnitude of the problem at hand, this study recommends an introduction of mandatory emission tests of SPM, lead and sulphur dioxide (SO₂). The study further recommends the introduction of continuous and/or regular air quality monitoring and the use non-leaded petrol in Tanzania.     

Performances and application of a passive sampling method for the simultaneous determination of nitrogen dioxide and sulfur dioxide in ambient air

The performances and applicability of a diffusion tubesampler for the simultaneous measurements of NO₂ andSO₂ in ambient air were evaluated. SO₂ andNO₂are collected by the passive sampler using triethanolamine astrapping agent and are determined as sulphate and nitrite withion chromatography. The detection limit (2.3 g m^-3 ofNO₂ and 4.2 g m^-3 of SO₂ for two weekssampling) is adequate for the determination of concentrationsin urban and industrial areas. Precision of the method as RSDis in mean 5% for NO₂ and 12% for SO₂ at theconcentration levels in urban areas. Calibration of the methodwas performed in the field conditions by comparison between theresponses of sampler and the concentrations measured by thecontinuous monitors. High degree of linearity (correlationcoefficients > 0.8) is found between the passive sampler tubeand the continuous monitor data for both NO₂ and SO₂.To reduce the wind velocity influence on passive sampling ofdiffusion tubes, a protective shelter was tested in this study.The overall uncertainty of one measure for the optimised methodis estimated at 5 g m^-3 for NO₂ and 6g m^-3 for SO₂. Suitability of this passivesampling method for air pollution monitoring in urban areas wasdemonstrated by the results shown in this paper on a campaigncarried out in the French agglomeration.     

Aldehyde Concentrations in Ambient Air of Coastal Georgia, U.S.A.

Aldehydes are an airborne byproduct of many industrialprocesses, vehicle transportation, and emissions fromnumerous natural sources. To characterize aldehydeconcentrations in ambient air of the Savannah, Georgiaarea, air samples for 3 aldehydes (formaldehyde,acetaldehyde, and propionaldehyde) were collected atfive sites on a monthly basis over a 12-month periodfrom December of 1995 through November 1996. Four ofthe sites were in central Savannah and the fifth sitewas located in a rural area about 56 km south ofSavannah. During each 24-hr sampling episode, sampleswere collected in two 12-hr periods approximatingdaylight and nighttime hours, following U.S. EPAMethod TO-11. Formaldehyde concentrations ranged from0.17 to 6.80 g m^-3, acetaldehydeconcentrations ranged from 0.07 to7.60 g m^-3, and propionaldehyde levels rangedfrom 0.02 to 9.10 g m^-3. On average, thefour sites in Savannah had higher aldehydeconcentrations than the rural site (2.0 versus1.2 g m^-3 for formaldehyde, 2.3 versus1.7 g m^-3 for acetaldehyde, and 1.2 versus1.0 g m^-3 for propionaldehyde). The daytimeconcentrations for formaldehyde and acetaldehyde werehigher than the nighttime levels. The data from allthe sites were within published worldwide backgroundvalues for aldehydes.     

CHLOROFORM LEVELS IN THE DRINKING WATER OF HYDERABAD CITY, INDIA

A one-year study was conducted on the chloroform concentrationof the municipal drinking water of Hyderabad City. Consumertap water samples were collected from different parts of thewater-distribution system of the city. Duplicate samplescollected from the sites were extracted with organic solvent,pentane and analysed using a gas chromatograph equipped with⁶³Ni electron capture detector. Results indicate avariation in haloform concentration in different seasons ofthe year. A maximum concentration, ranging from 67.0–70.5g/l was observed during the summer. However, the meanlevel of chloroform was below the permissible level of 30g/l recommended by WHO (1984).     

PM2.5 and PM10 Concentrations from the Qalabotjha Low-Smoke Fuels Macro-Scale Experiment in South Africa

This article presents results from the particulate monitoringcampaign conducted at Qalabotjha in South Africa during the winter of 1997. Combustion of D-grade domestic coal and low-smoke fuels were compared in a residential neighborhood to evaluate the extent of air quality improvement by switchinghousehold cooking and heating fuels.Comparisons are drawn between the gravimetric results from the two types of filter substrates (Teflon-membrane and quartz-fiber) as well as between the integrated and continuous samplers. It is demonstrated that the quartz-fiber filters reported 5 to 10% greater particulate mass than the Teflon-membrane filters, mainly due to the adsorption of organic gases onto the quartz-fiber filters. Due to heating of sampling stream to 50 °C in the TEOM continuous sampler and the high volatile content of the samples, approximately 15% of the particulate mass was lost during sampling.The USEPA 24-hr PM_2.5 and PM₁₀ National Ambient Air Quality Standards (NAAQS) of 65 g m^-3 and 150 g m^-3, respectively, were exceeded on several occasions during the 30-day field campaign. Average PMconcentrations are highest when D-grade domestic coal was used, and lowest between day 11 and day 20 of the experiment when a majority of the low-smoke fuels were phased in. Source impacts from residential coal combustion are also found to be influenced by changes in meteorology, especially wind velocity.PM_2.5 and PM₁₀ mass, elements, water-soluble cations (sodium, potassium, and ammonium), anions (chloride, nitrate, and sulfate), as well as organic and elemental carbonwere measured on 15 selected days during the field campaign. PM_2.5 constituted more than 85% of PM₁₀ at three Qalabotjha residential sites, and more than 70% of PM₁₀ at the gradient site in the adjacent community of Villiers. Carbonaceous aerosol is by far the most abundant component, accounting for more than half of PM mass at the three Qalabotjha sites, and for more than a third of PM mass at the gradient site. Secondary aerosols such as sulfate, nitrate,and ammonium are also significant, constituting 8 to 12% of PM mass at the three Qalabotjha sites and 15 to 20% at the Villiers gradient site.     

Trihalomethane Formation Potential and Concentration Changes During Water Treatment at Mumbai (India)

The treated water at the outlet oftreatment plants and representative servicereservoirs of Mumbai city have been evaluatedfor trihalomethane formation potential in1995–1996. Chloroform, dichlorobromomethane,chlorodibromomethane and bromoform have beenmonitored during monsoon, winter and summer.The levels of chloroform are found above theregulated WHO guideline value of 200 g L^-1 in final water during postmonsoon atGhatkopar (226 g L^-1), Malbar (210.3 g L^-1) and Tulsi (231.26 g L^-1).     

Intake of Chromium by the Adult Population of Mumbai City

Electro Thermal Atomic Absorption Spectrophotometry (ET-AAS), is used for the determination of chromium (Cr) in a variety of environmental matrices. The detection limit for the estimation of Cr is 2 pg absolute for a volume injection of 20 l. The precision of the method is established by analysing Cr from a synthetic mixture containing various elements in different qualities (0.5–10 ppm) and is found to be within ± 8%. The reliability of estimation is further assessed through the analysis of Standard Reference Materials (SRMs) of soil, hay, milk powder and lake sediment obtained from IAEA.The total intake of Cr through air, water and food works out to be 54 g/day for the adult population of Mumbai city. The dietary intake through food is the major contributor to the total intake of Cr. The concentration of Cr in atmospheric air and drinking water collected from different suburbs showed geometric mean concentrations of 0.09 g/m³ and 0.3 g/l, respectively. The daily intake of Cr, though lower, is closer to the lower bound of the recommended value of 50–200 g/day.     

An Evaluation of Selenium Concentrations in Water, Sediment, Invertebrates, and Fish from the Republican River Basin: 1997–1999

The Republican River Basin of Colorado,Nebraska, and Kansas lies in a valley which contains PierreShale as part of its geological substrata. Selenium is anindigenous constituent in the shale and is readily leached intosurrounding groundwater. The Basin is heavily irrigated throughthe pumping of groundwater, some of which is selenium-contaminated, onto fields in agricultural production. Water,sediment, benthic invertebrates, and/or fish were collected from46 sites in the Basin and were analyzed for selenium to determinethe potential for food-chain bioaccumulation, dietary toxicity,and reproductive effects of selenium in biota. Resultingselenium concentrations were compared to published guidelines orbiological effects thresholds. Water from 38% of the sites (n = 18) contained selenium concentrations exceeding 5 g L^-1, which is reported to be a high hazard for selenium accumulation into the planktonic food chain. An additional 12 sites (26% of the sites) contained selenium in water between 3–5 g L^-1, constituting a moderate hazard. Selenium concentrations in sedimentindicated little to no hazard for selenium accumulation fromsediments into the benthic food chain. Ninety-five percent ofbenthic invertebrates collected exhibited selenium concentrationsexceeding 3 g g^-1, a level reported as potentially lethal to fish and birds that consume them. Seventy-five percent of fish collected in 1997, 90% in 1998, and 64% in 1999 exceeded 4 g g^-1selenium, indicating a high potential for toxicity andreproductive effects. However, examination of weight profilesof various species of collected individual fish suggestedsuccessful recruitment in spite of selenium concentrations thatexceeded published biological effects thresholds for health andreproductive success. This finding suggested that universalapplication of published guidelines for selenium may beinappropriate or at least may need refinement for systems similarto the Republican River Basin. Additional research is needed todetermine the true impact of selenium on fish and wildliferesources in the Basin.     

Mercury Vapor Determination in Hospitals

The measurements of metallic mercury vapor were carried out in seven local hospitals, where mercury-containing products are widely used, as well as in one residence to check effectiveness of decontamination after mercury spillage. Hopcalite as a solid sorbent was used in active and passive sampling methods, and mercury was analyzed by CV-AAS technique. Good agreement was found between results of mercury measurements using active samplers (pumped hopcalite adsorption tubes) and passive (diffusion) monitors applied in indoor atmosphere. The results indicated the presence of metallic mercury vaporization sources in the assessed hospital rooms but in the majority of cases mercury levels did not exceed 1 g/m³ i.e. Polish permissible concentration for residence. However, in some of the hospital rooms, elevated concentrations of mercury vapor were found and airborne levels of up to 13.9 g/m³ were recorded. Higher concentrations of mercury vapor were observed in autumn season when compared to summer.     

Characterization of atmospheric dust at Gurushikar,Mt. Abu,Rajasthan

The nature of atmospheric aerosols at Gurushikar, Mt. Abu, Rajasthan where a gamma ray telescope is to be installed, was investigated. Air particulate samples collected on filters were used to estimate the total suspended particulate matter (TSPM) and its elemental composition. The TSPM varied from 31 to 103 g/m³ during January to March 1994. The heighest loads were observed during the months of May and June (80–100 g/m³) and lowest during October (20–60 g/m³). The dust was also examined for size, shape and nature of the mineral matter. The particle sizes varied from 100 m to 5 m. The course particles (>50 m) are irregular shaped quartz grains. Some of the medium size (=50 m) particles were spherical and were highly conducting. These particles were rich in iron content. Correlation coefficients among various elements in the dust showed that it is made up of mainly two components-wind blown ground dust and particulate arising out of wood and coal burning.     

Status of Heavy Metals in Water and Bed Sediments of River Gomti – A Tributary of the Ganga River, India

The concentrations of cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc in water and bed sediments of river Gomti have been studied in a fairly long stretch of 500 km from Neemsar to Jaunpur. Grab samples of water (October 2002–March 2003) and bed sediments (December 2002 and March 2003) were collected from 10 different locations following the standard methods. The river water and sediment samples were processed and analyzed for heavy metals viz., Cd, Cr, Cu, Fe, Pb, Mn, Ni, and Zn, and using ICP-AES. The heavy metals found in the river water were in the range: Cd (0.0001–0.0005 mg/L); Cr (0.0015–0.0688 mg/L); Cu (0.0013–0.0.0043 mg/L); Fe (0.0791–0.3190 mg/L); Mn (0.0038–0.0.0973 mg/L); Ni (0.0066–0.011 mg/L); Pb (0.0158–0.0276 mg/L); and Zn (0.0144–0.0298 mg/L) respectively. In the sediments the same were found in the range: Cd (0.70–7.90 g/g); Cr (6.105–20.595 g/g); Cu (3.735–35.68 g/g); Fe (5051.485–8291.485 g/g); Mn (134.915–320.45 g/g); Ni (13.905–37.370 g/g); Pb (21.25–92.15 g/g); and Zn (15.72–99.35 g/g) of dry weight respectively. Some physico-chemical parameters viz., pH, total solids, total dissolved solids, total suspended solids, dissolved oxygen, biological oxygen demand, chemical oxygen demand, hardness etc. were estimated as these have direct or indirect influence on the incidence, transport and speciation of the heavy metals. Based on the geoaccumulation indices, the Gomti river sediments from Neemsar to Jaunpur are considered to be unpolluted with respect to Cr, Cu, Fe, Mn, and Zn. It is unpolluted to moderately polluted with Pb. In case of Cd it varies from moderately polluted to highly polluted. As far as Ni is concerned the sediment is very highly polluted at Barabanki and Jaunpur D/s. No correlation was found between enrichment factor and geoaccumulation index.     

Monitoring for 2,4-residues in fish species resident in treated lakes in east-central Ontario 1977–80

Authorized use of 2,4-D by cottage owners in Buckhorn Lake for the years 1977 to 1980 ranged from 124 to 280 kg of active ingredient, annually. This would give predicted average water concentrations of 2 to 4 g L^–1 during the June–July period. However, higher residues were observed in the Lake. Between 1977 and 1980, 353 individual fish, of eight species, were caught for analysis in Buckhorn and Chemong lakes. These fish belonged to eight edible species. Twelve percent of the fish caught during the pre-treatment period (i.e. May), had detectable residues of 2,4-D. Mean residues by species and year ranged from <5 to 30 g kg^–1 2,4-D. In the early post-treatment period (i.e. July), 69% of fish caught had mean residues by species which ranged from <5 to 136 g kg^–1 2,4-D. In the late post-treatment period (i.e. October), 19% of fish caught by year had detectable residues of 2,4-D. Mean residues by species during this period ranged from <5 to 60 g kg^–1 2,4-D. While 15 (i.e. 4%) of the 353 fish and fish composites had 2,4-D above the maximum residue limit of 100 g kg^–1 only six were of edible size.     

Beryllium Concentrations in Ambient Air and Its Source Identification

Beryllium concentrations in atmospheric particulate and soil samples in and around a Beryllium Processing Facility (BPF) have been measured. The mean air concentration level of beryllium in and around the fence line of the BPF is 0.48 ± 0.43 ng m^-3 (n = 397) and is mostly influenced by diurnaland seasonal changes. The observed air concentration levelswere well below the prescribed ambient air quality (AAQ)standard of 10 ng m^-3. The soil concentration levels ofberyllium in the study area were found to be in the range of 1.42–2.75 g g^-1. The mass median aerodynamic diameter (MMAD)of beryllium aerosols in ambient air was found to be 6.9 m.Source identification using the Enrichment Factor (EF) approachindicates soil as the predominant contributory source for air concentrations at the site.     

The effect of temperature and salinity on copper body-burden and copper toxicity to Hediste (Nereis) diversicolor

Temperature from 12 to 22°C and salinity from 30.5 to 7.6 increased accumulation of copper in Hediste diversicolor. Copper accumulated ranged from 85.83 to 217.14 g g^-1. Sediments reduced accumulation of copper under temperature-salinity combinations. Accumulated copper ranged from 90.19 to 153.26 g g^-1.However, mortality of the worms was not solely dependent upon copper body-burden. It ranged from 34 to 45% and from 38 to 80% in the presence of sediment. A combination of osmoregulatory and thermal stresses increased the toxic effect of copper to the worms.     

Emissions of gaseous and particulate pollutants in a port and harbour region in India

Ports can generate large quantity of pollutants in the atmosphere due to various activities like loading and unloading,transportation, and construction operations. Determination of the character and quantity of emissions from individual sources is an essential step in any project to control and minimize the emissions.In this study a detailed emission inventory of total suspendedparticulate matter (TSP), particulate matter less than 10 m(PM₁₀), sulfur dioxide (SO₂) and nitrogen oxides (NO_x) for a port and harbour project near Mumbai is compiled. Results show that the total annual average contributions of TSP and PM₁₀ from all the port activitieswere 872 and 221 t yr^-1, respectively. Annual average emissions of gaseous pollutants SO₂ and NO_xwere 56 and 397 t yr^-1, respectively, calculatedby using emission factors for different port activities. The maximum TSP emission (419 t yr ^-1) was from paved roads, while the least (0.4 t yr^-1) was from bulk handling activity. The maximum PM₁₀ emission (123 t yr^-1) was from unpaved roads and minimum (0.2 t yr^-1) from bulk handling operations. Similarly the ratio of TSP and PM₁₀ emission was highest (5.18) from paved roads and least (2.17) from bulk handling operations. Regression relation was derivedfrom existing emission data of TSP and PM₁₀ from variousport activities. Good correlation was observed between TSP andPM₁₀ having regression coefficient >0.8.     

Characterisation of particulate matter emissions from the Zimbabwe Mining and Smelting Company (ZIMASCO) Kwekwe Division (Zimbabwe): a ferrochrome smelter

Particulate matter emissions from stack number 2 of a majorferrochrome smelter, Zimbabwe Mining and Smelting Company(ZIMASCO) were characterized and the rates at which the elementsCr, Fe, Cu and Zn and total ferrochrome dust are emitted into theatmosphere were determined. The extent of soil contamination bythe dust deposited around the smelter in the generally prevailingsoutheasterly wind direction around the smelter was carried out.The highest concentrations of Cr and Fe occurred in the fineparticulates of sizes less than 59 m whilst that of Cu and Znoccurred in the coarse particulates of size range 70-100 m.The emission rates from stack 2 were; total ferrochromeparticulates 62.17 kg h^-1, Cr 6.217 kg h^-1, Fe 2.423 kg h^-1, Zn42 mg h^-1 and 6 mg h^-1 for Cu. Particulate matter was emitted at arate of 289 mg m^-3 from stack number 2. This value exceeds thelegal limit of 200 mg m^-3. Chromium and iron are the metalsin the largest amounts. The particles that constitute the largestproportion of the dust were in the range of 58-107.5 m. Thisis a characteristic feature of the particulate matter emissionsfrom ZIMASCO. Soils in the downwind direction from the smelterwere polluted with Cr up to a distance of about 700 m outward fromthe perimeter of the boundary of the smelter.