The interaction between concrete pavement and corrosion-induced copper runoff from buildings

Changes in chemical speciation of copper and the capacity of concrete pavement to retain copper in runoff water from external buildings have been investigated at urban field conditions, and in parallel laboratory experiments simulating outdoor scenarios. The research study showed the concrete surface to form a copper rich surface layer (≈50 μm thick) upon exposure, and a high capacity to significantly reduce the bioavailable fraction of released copper (20–95%). The retention capacity of copper varied between 5 and 20% during single runoff events in the laboratory, and between 10 and 40% of the total copper release during single natural runoff events. The capacity to retain and reduce the bioavailable fraction of non-retained copper increased with increasing wetness of the concrete surfaces, increasing pH of the runoff water and decreasing flow rates. Bioassay testing with bacterial and yeast bioreporters showed the bioavailable fraction of non-retained copper to be significantly lower than the total copper concentration in the runoff water, between 22 and 40% for bacteria and between 8 and 31% for yeast. The application of generated data to simulate a fictive outdoor scenario, suggests a significant reduction of bioavailable and total copper to background values during environmental entry as a result of dilution, and the interaction with solid surfaces, organic matter and complexing agents already in the drainage system.     

Atmospheric deposition and storm induced runoff of heavy metals from different impermeable urban surfaces

Contaminants deposited on impermeable surfaces migrate to stormwater following rainfall events, but accurately quantifying their spatial and temporal yields useful for mitigation purposes is challenging. To overcome limitations in current sampling methods, a system was developed for rapid quantification of contaminant build-up and wash-off dynamics from different impervious surfaces. Thin boards constructed of concrete and two types of asphalt were deployed at different locations of a large carpark to capture spatially distributed contaminants from dry atmospheric deposition over specified periods of time. Following experimental exposure time, the boards were then placed under a rainfall simulator in the laboratory to generate contaminant runoff under controlled conditions. Single parameter effects including surface roughness and material composition, number of antecedent dry days, rain intensity, and water quality on contaminant build-up and wash-off yields could be investigated. The method was applied to quantify spatial differences in deposition rates of contaminants (TSS, zinc, copper and lead) at two locations varying in their distance to vehicle traffic. Results showed that boards exposed at an unused part of the carpark >50 m from vehicular traffic captured similar amounts of contaminants compared with boards that were exposed directly adjacent to the access route, indicating substantial atmospheric contaminant transport. Furthermore, differences in contaminant accumulation as a function of surface composition were observed. Runoff from asphalt boards yielded higher zinc loads compared with concrete surfaces, whereas runoff from concrete surfaces resulted in higher TSS concentrations attributed to its smoother surfaces. The application of this method enables relationships between individual contaminant behaviour and specific catchment characteristics to be investigated and provides a technique to derive site-specific build-up and wash-off functions required for modelling contaminant loads from impermeable surfaces.     

Corrosion-induced release of Cu and Zn into rainwater from brass, bronze and their pure metals. A 2-year field study

A 2-year field study has been conducted in an urban environment to provide annual release rates of copper and zinc from brass (20 wt% Zn) and copper and tin from bronze (6 wt% Sn) compared to sheets of their pure alloy constituents, copper and zinc. Despite relatively low nominal bulk alloy content, substantially more zinc was released from brass compared to copper. Both metals were released at a significantly slower rate from the brass alloy, compared to the pure metals. The proportion of release rates of copper and zinc from the alloy differed significantly from their proportions in the bulk alloy. Bronze showed relatively constant release rates of copper, being similar to that of pure copper sheet. The release of tin from bronze was negligible. The results clearly show that alloys and the pure metals behave very differently when exposed to rainwater. Accordingly, release rates from pure metals cannot be used to predict release rates of individual constituents from their alloys. Generated data are of importance within REACH, the new chemical policy of the European commission, where metal alloys erroneously are being treated as mixtures of chemical substances.     

Modelling vegetation greenness responses to climate variability in a Mediterranean terrestrial ecosystem

Accurate knowledge of the quality and environmental impact of the highway runoff in Pear River Delta, South China is required to assess this important non-point pollution source. This paper presents the quality characterization and environmental impact assessment of rainfall runoff from highways in urban and rural area of Guangzhou, the largest city of Pear River Delta over 1 year’s investigation. Multiple regression and Pearson correlation analysis were used to determine influence of the rainfall characteristics on water quality and correlations among the constituents in highway runoff. The results and analysis indicates that the runoff water is nearly neutral with low biodegradability. Oil and grease (O&G), suspended solids (SS) and heavy metals are the dominant pollutants in contrast to the low level of nutrient constituents in runoff. Quality of highway runoff at rural site is better than that of at urban site for most constituents. Depth and antecedent dry period are the main rainfall factors influencing quality of highway runoff. The correlation patterns among constituents in highway runoff at urban site are consistent with their dominant phases in water. Strong correlations (r ≥ 0.80) are found among chemical oxygen demand (COD), total phosphorus, Cu and Zn as well as conductivity, nitrate nitrogen and total nitrogen. O&G, COD, SS and Pb in highway runoff at urban site substantially exceed their concentrations in receiving water of Pear River. The soil directly discharged by highway runoff at rural site has contaminated seriously by heavy metals in surface layer accompanying with pH conversion from original acidic to alkaline at present.     

Evaluation of vacuum filter sock surface sample collection method for Bacillus spores from porous and non-porous surfaces

Vacuum filter socks were evaluated for recovery efficiency of powdered Bacillus atrophaeus spores from two non-porous surfaces, stainless steel and painted wallboard and two porous surfaces, carpet and bare concrete. Two surface coupons were positioned side-by-side and seeded with aerosolized Bacillus atrophaeus spores. One of the surfaces, a stainless steel reference coupon, was sized to fit into a sample vial for direct spore removal, while the other surface, a sample surface coupon, was sized for a vacuum collection application. Deposited spore material was directly removed from the reference coupon surface and cultured for enumeration of colony forming units (CFU), while deposited spore material was collected from the sample coupon using the vacuum filter sock method, extracted by sonication and cultured for enumeration. Recovery efficiency, which is a measure of overall transfer effectiveness from the surface to culture, was calculated as the number of CFU enumerated from the filter sock sample per unit area relative to the number of CFU enumerated from the co-located reference coupon per unit area. The observed mean filter sock recovery efficiency from stainless steel was 0.29 (SD = 0.14, n = 36), from painted wallboard was 0.25 (SD = 0.15, n = 36), from carpet was 0.28 (SD = 0.13, n = 40) and from bare concrete was 0.19 (SD = 0.14, n = 44). Vacuum filter sock recovery quantitative limits of detection were estimated at 105 CFU m(-2) from stainless steel and carpet, 120 CFU m(-2) from painted wallboard and 160 CFU m(-2) from bare concrete. The method recovery efficiency and limits of detection established in this work provide useful guidance for the planning of incident response environmental sampling for biological agents such as Bacillus anthracis.     

Storm runoff quality and pollutant loading from commercial, residential, and industrial catchments in the tropic

Information on the pollution level and the influence of hydrologic regime on the stormwater pollutant loading in tropical urban areas are still scarce. More local data are still required because rainfall and runoff generation processes in tropical environment are very different from the temperate regions. This study investigated the extent of urban runoff pollution in residential, commercial, and industrial catchments in the south of Peninsular Malaysia. Stormwater samples and flow rate data were collected from 51 storm events. Samples were analyzed for total suspended solids, 5-day biochemical oxygen demand, chemical oxygen demand, oil and grease (O&G), nitrate nitrogen (NO₃-N), nitrite nitrogen, ammonia nitrogen, soluble reactive phosphorus, total phosphorus (TP), and zinc (Zn). It was found that the event mean concentrations (EMCs) of pollutants varied greatly between storm characteristics and land uses. The results revealed that site EMCs for residential catchment were lower than the published data but higher for the commercial and industrial catchments. All rainfall variables were negatively correlated with EMCs of most pollutants except for antecedent dry days (ADD). This study reinforced the earlier findings on the importance of ADD for causing greater EMC values with exceptions for O&G, NO₃-N, TP, and Zn. In contrast, the pollutant loadings are influenced primarily by rainfall depth, mean intensity, and max 5-min intensity in all the three catchments. Overall, ADD is an important variable in multiple linear regression models for predicting the EMC values in the tropical urban catchments.     

Distribution and partitioning of iron, zinc, and arsenic in surface sediments in the Grande River mouth to Cuitzeo Lake, Mexico

Cuitzeo Lake is one of the largest and most important lakes in Mexico. It receives different types of pollutants through its main tributary, the Grande River of Morelia. The aim of this work was to determine if high concentrations of iron, zinc, and arsenic are present in sediments in an area near the river mouth to the lake, as well as to estimate the partitioning of these metals using a sequential extraction procedure in order to obtain information of their potential bioavailability. Sediment samples were collected from three different sites in Cuitzeo Lake and two sites in Grande River in both dry and wet seasons. A sequential extraction procedure was carried out to determine the concentrations of these elements in different geochemical phases of the sediments. Total metal concentrations were evaluated by using the enrichment factor and the geoaccumulation index. A comparison with sediment quality guidelines and shale values has also been made. The results indicate that sediments are considered unpolluted by iron and moderately polluted by zinc and arsenic. However, fractionation studies showed that significant amounts of Zn and As could be released to the lake ecosystem depending on the environmental conditions, representing a medium risk potential of bioavailability to the biota.     

Characteristics and transport of organochlorine pesticides in urban environment: air, dust, rain, canopy throughfall, and runoff

Characteristics and transport of organochlorine pesticides (OCPs) in urban multiple environments, including air, dust, rain, canopy throughfall, and runoff water, are explored in this study. Hexachlorocyclohexanes (HCHs) dominated in both air and rain water, and dichlorodiphenyltrichloroethane (DDT) related substances showed a higher affinity to dust. Relatively high concentrations of DDT and dichlorodiphenyldichloroethylene (DDE) in air, rain and dust imply that technical DDT in the environment has been degrading, and there may be unknown local or regional emission sources that contain DDTs in the study area. Source identification showed that DDTs in Beijing urban environments with a fresh signature may originate from the atmospheric transport from remote areas. The ratio of α-/γ-HCH in dust, rain, canopy throughfall and runoff were close to 1, indicating the possible use of lindane. OCPs in runoff were transported from various sources including rain, dust, and canopy throughfall. In runoff, DDTs and hexachlorobenzene (HCB) were mainly transported from dust, and HCHs were mainly from rain and canopy throughfall.     

滇池流域城市降雨径流污染负荷定量化研究

借助遥感影像处理软件ERDAS IMAGINE9．2和GIS技术对研究区QuickBird影像图进行下垫面类型分类和统计,在对降雨产流过程及地表径流污染特征研究的基础上,根据2008年的降雨总量,定量计算滇池流域全年城市降雨径流污染负荷。结果表明,流域内城镇区域屋顶、庭院、道路、绿地及其他类型面积比例分别为13．8％、11．6％、5．2％、3．8％及65．6％。2008年滇池流域城市降雨径流污染负荷COD、TN、TP分别为2．95×10^4t、1．24×10^3t、103t。滇池北岸昆明主城区内的建成区全年城市降雨径流污染负荷COD、TN、TP的产生量分别为2．39×10^4t、9．89×10^3t、8．24×10^3t,对滇池流域COD、TN、TP的贡献率总和分别为81．2％、79．5％、80．3％。     

城市河流重金属元素对降雨径流的动态响应

以海口市美舍河市区河段为研究对象,于2020年雨季分别采集降雨径流以及降雨径流汇入后的河流瞬时水样,测定并分析主要重金属元素的浓度及其变化规律,探讨其对降雨径流的动态响应。研究结果表明：降雨径流对河流可溶态污染元素质量浓度的贡献不突出,对可溶态锌（Zn）、砷（As）、镉（Cd）、硒（Se）具有一定稀释作用,排水口下游 3 m处是可溶态铬(Cr）、锰（Mn）、钴（Co）对降雨径流响应最显著区域;降雨径流对各悬浮态元素质量浓度贡献较大,排水口下游7 m处是绝大多数悬浮态元素对降〖JP〗雨径流响应最显著区域;Mn、Zn、Cr、镍（Ni）、As、Co、Cd 7种元素的总质量浓度对降雨径流的动态响应表现为先上升后下降。其中,排水口下游3 m处是Cr、As总质量浓度对降雨径流响应最显著区段,排水口下游7 m处是Mn、Co、Ni、Zn及Cd总质量浓度对降雨径流响应最显著区段。降雨径流对河流主要污染元素年输入总量估算结果表明,海口市建成区降雨径流向美舍河等受纳水体直接年输入量最大的是Mn和Zn,其次是Cr、As、Ni,Se与Cd的年输入量最小。     

Investigation of urban water quality using simulated rainfall in a medium size city of China

Road-deposited sediment (RDS) is an important environmental medium for impacting the characteristics of pollutants in stormwater runoff; it is of critical importance to investigate the water quality of urban environments. The paper develops a rainfall simulator as an important research tool to ensure homogeneity and reduce the large number of variables that are usually inherent to urban water quality research. The rainfall simulator was used to experiment runoff samples from typical residential and traffic areas in the Zhenjiang. The data show that land use is one of the major factors contributing to the difference in the pollutants concentration in the RDS. The maximum mean EMC for TN, TDN, TP, and TDP at residential area was 5.52, 3.07, 1.65, and 0.36 mg/L, respectively. The intense traffic area displayed the highest metal concentrations. Concentrations of runoff pollutants varied greatly with land use and storm characteristics. The correlation of pollutant concentrations with runoff times was another predominant phenomenon. Peaks in pollutants concentration occurred at 1 and 10 min during the whole storm event. A concentration peak that correlates with a peak in runoff flowrate correlates with rainfall intensity. The pollutant loadings (kilograms per hectare) in the Zhenjiang were 11.39 and 55.28 for COD, 8.42 and 57.48 for SS, 0.11 and 0.88 for TN, 0.02 and 0.14 for TP, 0.02 and 0.09 for Zn, and 0.01 and 0.04 for Pb. The higher rainfall contribute to the higher pollutant loading at the residential and intense traffic areas, as a result of the pollutant loadings direct dependence on rainfall intensity. The results confirmed that the rainfall simulator is a reliable tool for urban water quality research and can be used to simulate pollutant wash-off. These findings provide invaluable information for the development of appropriate management strategies to decrease nonpoint source contamination loading to the water environment in urban areas.     

Development, validation, and uncertainty measurement of multi-residue analysis of organochlorine and organophosphorus pesticides using pressurized liquid extraction and dispersive-SPE techniques

Increased water use associated with rapid growth in the Las Vegas Valley has inadvertently led to the creation of unique wetland systems in Southern Nevada with an abundance of biological diversity. Constructed and naturally created wetlands in the Las Vegas Valley watershed were studied to characterize and understand their potential role for improving ecosystem services (i.e., water purification). Nutrient and metal removal was assessed at four sites including a natural urban runoff wetland, a constructed urban runoff wetland, a constructed wastewater wetland, and a natural urban runoff/wastewater wetland. Plant nutrient uptake was dependent on ambient nutrient concentrations in water and sediments of specific wetlands, irrespective of the type of plants present. Phosphorus was mostly concentrated in below-ground plant parts whereas nitrogen was concentrated in above-ground parts. As for metalloids, bulrushes were more efficient than cattails at taking up arsenic and selenium. Averaging all the wetland sites and plant species, total nitrogen, phosphorus, arsenic and selenium removal was 924.2, 61.5, 0.30, and 0.38 kg/ha/year, respectively. Our findings suggest that natural and created wetland systems can improve water quality in the Las Vegas Valley watershed for some common pollutants, however, other measures are still needed to improve water quality below regulatory thresholds.     

Scenario Analysis for the San Pedro River, Analyzing Hydrological Consequences of a Future Environment

Studies of future management and policy options based on different assumptions provide a mechanism to examine possible outcomes and especially their likely benefits and consequences. The San Pedro River in Arizona and Sonora, Mexico is an area that has undergone rapid changes in land use and cover, and subsequently is facing keen environmental crises related to water resources. It is the location of a number of studies that have dealt with change analysis, watershed condition, and most recently, alternative futures analysis. The previous work has dealt primarily with resources of habitat, visual quality, and groundwater related to urban development patterns and preferences. In the present study, previously defined future scenarios, in the form of land-use/land-cover grids, were examined relative to their impact on surface-water conditions (e.g., surface runoff and sediment yield). These hydrological outputs were estimated for the baseline year of 2000 and predicted twenty years in the future as a demonstration of how new geographic information system-based hydrologic modeling tools can be used to evaluate the spatial impacts of urban growth patterns on surface-water hydrology.     

Metal fractionation study on bed sediments of Hussainsagar Lake, Hyderabad, India

Hussainsagar Lake in the heart of Hyderabad City (India) receives toxic substances through five streams draining from a catchment area of 245 km². Of particular interest are heavy metals received from urban runoff as well as municipal sewage and industrial effluents. Heavy metals entering the lake get adsorbed onto the suspended sediments, which eventually settle down in the bottom of the lake. In this study, fractionation of metal ions has been studied on the bed sediments of Hussainsagar Lake in order to determine the ecotoxic potential of metal ions. Comparison of sediments with average shale values indicated anthropogenic enrichment with copper, nickel, lead, cadmium, and zinc. The risk assessment code as applied to the present study reveals that 10–17% of manganese, 10–18% of nickel, 14–24% of chromium, 10–19% of lead, 21–30% of cadmium, and 18–28% of zinc exist in exchangeable fraction and, therefore, comes under medium risk category and may enter into food chain. The association of these metals with the exchangeable fraction may cause deleterious effects to aquatic life. The present database will help in formulating guidelines for carrying out dredging operations under restoration programs in the Hussainsagar Lake.     

绿色屋顶径流水质监测研究进展

概述了国内外绿色屋顶径流水质监测发展状况,并从绿色屋顶径流收集、降雨场次、监测指标、径流水质和污染物传输的影响因子等方面进行了归纳和总结。基于水量和水质管理,从几何尺寸、土壤类型和厚度、植被和维护等方面阐述了绿色屋顶在城市排水系统中的作用和地位。揭示了绿色屋顶需要开展长期的监测和研究,绿色屋顶径流水质监测逐渐向采样自动化和分析自动化方向发展。     

Concentrations of dissolved herbicides and pharmaceuticals in a small river in Luxembourg

Urban and agricultural areas affect the hydraulic patterns as well as the water quality of receiving drainage systems, especially of catchments smaller than 50 km(2). Urban runoff is prone to contamination due to pollutants like pesticides or pharmaceuticals. Agricultural areas are possible sources of nutrient and herbicide contamination for receiving water bodies. The pollution is derived from leaching by subsurface flow, as well as wash-off and erosion caused by surface runoff. In the Luxembourgish Mess River catchment, the pharmaceutical and pesticide concentrations are comparable with those detected by other authors in different river systems worldwide. Some investigated pesticide concentrations infringe current regulations. The maximum allowable concentration for diuron of 1.8 μg l(?-?1) is exceeded fourfold by measured 7.41 μg l(?-?1) in a flood event. The load of dissolved pesticides reaching the stream gauge is primarily determined by the amount applied to the surfaces within the catchment area. Storm water runoff from urban areas causes short-lived but high-pollutant concentrations and moderate loads, whereas moderate concentrations and high loads are representative for agricultural inputs to the drainage system. Dissolved herbicides, sulfonamides, tetracyclines, analgesics and hormones can be used as indicators to investigate runoff generation processes, including inputs from anthropogenic sources. The measurements prove that the influence of kinematic wave effects on the relationship between hydrograph and chemographs should not be neglected in smaller basins. The time lag shows that it is not possible to connect analysed substances of defined samples to the corresponding section of the hydrograph.     

Morphology,microstructure and chemical composition of single inhalable particles in Shanghai,China

The morphology, microstructure, and chemical composition of a variety of particles emitted from coal-fired power plants, steel plants, and vehicle exhausts, which are possible sources of particulate matter (PM) in the atmosphere, were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and compared with particle samples collected from urban atmosphere to identify the best footprint or the suitable indicator relating the existence of studied particles and their possible emitters by the morphology, microstructure, and chemical composition of the particles. The investigation indicated that the particles from these three sources are different in morphology, microstructure, and chemical composition. Sphere aggregates were generally the most abundant components, with silicon and aluminum as major elements. The urban air particulate contained particles similar to those observed in the power plant, steel plant, and vehicle exhaust samples suggesting that all three sources are contributing to the pollution in the city.     

Speciation of heavy metals in biosolids of wastewater treatment plants at Mysore,Karnataka, India

Urban wastewater treatment leads to the generation of large quantities of biosolids. Accumulation of biosolids is a problem of environmental relevance due to the existence of heavy metals in the biosolids. Determination of total metal in biosolid provides information relating pollution levels. Determination of their mobilization capacity and behaviour in the environment is an important task. An experimental approach commonly used for studying the mobility, transport and bioavailability of metal in biosolids is the use of selective sequential extraction procedure. In the present study an attempt has been made to study the heavy metal properties in biosolid samples collected from urban wastewater treatment plants located at Mysore, Karnataka. Few heavy metals selected for the present study are cadmium, chromium, copper, iron, nickel and zinc. The concentration of these metals in biosolids and their partition in different fractions are studied. The speciation of metals based on the sequential extraction scheme was carried out. The concentration of heavy metals is lower than that established by European legislation. The residual fraction has the maximum percentage of heavy metals whereas, only a small fraction of heavy metals (Fe, Zn and Cd) are extracted in the most soluble fractions, exchangeable and carbonate fractions.     

长株潭城市群经济社会发展与环境压力

长株潭城市群是湖南省的核心增长极,是"资源节约型社会、环境友好型社会"社会建设综合配套改革试验区,但伴随高速的工业化发展和城市化进程,长株潭面临着严峻的资源约束和环境压力。文章从土地利用格局、经济社会发展、环境质量状况、主要污染物排放和资源能源利用等方面入手,综合分析了长株潭城市群的环境压力,主要体现在长株潭城市群城市化与土地需求的矛盾凸显,"摊大饼"的扩张模式带来生态风险;重工业和污染排放集聚,累积性污染突出;环境空气质量和地表水环境质量形势不容乐观;资源能源利用方式粗放等。结合城市群区域规划,提出了长株潭城市群在新型城镇化建设中应采取的生态环境保护措施建议。