Determination of total chromium by flame atomic absorption spectrometry after coprecipitation by cerium (IV) hydroxide

A method for the preconcentration of the total chromium based on coprecipitation with cerium (IV) hydroxide is proposed for determination of chromium by flame atomic absorption spectrometry. Different factors including carrier element amount, pH, sample volume and matrix ion effects for the precipitation were examined. The detection limit of the total chromium (k = 3, N = 15) was 0.18 μg l⁻¹. The presented method was applied for the determination of chromium in the wastewater samples from Kayseri and Nigde Organized Industrial Region-Turkey and in drinking water from our laboratory, Kayseri with satisfactory results (relative standard deviations below 8%, recoveries 95%). The analytical results obtained by the proposed method for certified copper sample was in good agreement with the certified value.     

Risk assessment due to intake of heavy metals through the ingestion of groundwater around two proposed uranium mining areas in Jharkhand,India

Heavy metal pollution of water resources can be apprehended in East Singhbhum region which is a highly mineralised zone with extensive mining of copper, uranium and other minerals. Ten groundwater samples were collected from each site and the heavy metal analysis was done by atomic absorption spectrophotometer. Analysis of the results of the study reveals that the concentration of iron, manganese, zinc, lead, copper and nickel in groundwater of Bagjata mining area ranged 0.06–5.3 mg l^− 1, 0.01–1.3 mg l^− 1, 0.02–8.2 mg l^− 1, 1.4–28.4 μg l^− 1, 0.78–20.0 μg l^− 1 and 1.05–20.1 μg l^− 1, respectively. In case of Banduhurang mining area, the range was 0.04–2.93 mg l^− 1, 0.02–1.1 mg l^− 1, 0.01–4.68 mg l^− 1, 1.04–33.21 μg l^− 1, 1.24–18.7 μg l^− 1 and 1.06–14.58 μg l^− 1, respectively. The heavy metals were found to be below the drinking water standards (IS:10500 1993) except iron (0.3 mg l^− 1) and manganese (0.1 mg l^− 1). The hazard quotients of the heavy metals for drinking water were below 1 posing no threat due to intake of water to the people for both the areas.     

Selective and sensitive extractive spectrophotometric determination of micro amounts of palladium(II) in spiked samples: using a new reagent N-ethyl-3-carbazolecarbaxaledehydethiosemicarbazone

N-Ethyl-3-cabazolecarboxaldehydethiosemicarbazone (ECCT) is proposed as a new, sensitive and selective complexing reagent for the separation and extractive spectrophotometric determination of palladium(II) at pH: 4.0 to form a yellowish orange colored 1:1 chelate complex, which is very well extracted in to n-butanol. The absorbance was measured at a maximum wavelength, 410 nm. This method obeys Beer’s law in the concentration range 0.0–6.6 μg mL⁻¹ and the correlation coefficient of Pd(II)-ECCT complex is 0.998, which indicates an excellent linearity between the two variables with good molar absorptivity and Sandell’s sensitivity, 1.647 × 10⁴ l mol⁻¹cm⁻¹, 6.49 × 10⁻³ μg cm⁻², respectively. The instability constant of complex calculated from Edmond’s method, 2.724 × 10⁻⁵ was in good agreement with the value calculated from Asmus’ method 2.624 × 10⁻⁵, at room temperature. The precision and accuracy of the method is checked with calculation of relative standard deviation (n = 5), 0.839. Edmond’s method was observed to be a more selective method in the presence of EDTA, oxalate and phosphate ions. The method was successfully applied for the determination of Pd(II) in water samples, synthetic mixtures and hydrogenation catalysts, employing an atomic absorption spectrometer for comparing these results.     

Environmental study of two significant solid samples: gravitation dust sediment and soil

In this work are presented results of the complex study of two significant solid environmental samples: gravitation dust sediments (industrial pollutants, potential source of risk elements input to soils) and soils (component of the environment, potential source of risk elements input to food web). The first phase of this study was focused on the study of the significant chemical properties (phase composition, content of organic and inorganic carbon) of the dust and soil samples. In the second phase, the fractionation analysis was used on the evaluation of the mobility of chosen risk elements (Cu, Ni, Pb, Zn) in the studied samples. The single-step extractions were applied in the order of the isolation of the element forms (fractions), with different mobilities during defined ecological conditions by utilization of the following reagents: 1 mol dm^− 3 NH₄NO₃ for isolation of the “mobile” fraction, 0.05 mol dm^− 3 ethylenediaminetetraacetic acid and 0.43 mol dm^− 3 CH₃COOH for isolation of the “mobilizable” fraction, and 2 mol dm^− 3 HNO₃ for isolation of all releasable forms. On the basis of the results obtained in this study, it is possible to state that different origins and positions of solid environmental samples in the environment reflect in different chemical properties of their matrix. The different properties of the sample matrix result in different mobilities of risk elements in these kinds of samples. The fractionation analysis with single-step extraction for isolation element fractions is the method most suitable for easy checking of environmental pollution and for evaluation of risk elements cycle in the environment.     

Development of simple and sensitive spectrophotometric method for the determination of bendiocarb in its formulations and environmental samples

Facile, selective and sensitive spectrophotometric method has been developed for the determination of bendiocarb in its insecticidal formulations, fortified water, food grains, agriculture wastewater and agriculture soil samples with prepared reagents. The method was based on alkaline hydrolysis of the bendiocarb pesticide, and the resultant hydrolysis product of bendiocarb was coupled with 2,6-dibromo-4-methylaniline to give a yellow color product with λmaxof457 nmorcouplingwith2, 6−dibromo−4−nitroanilinetoproducearedcoloredproductwithλ_max of474~nmorcouplingwith2, 4, 6−tribromoanilinetoformorangeredcoloredproducthasaλ_max of465 nm.Underoptimalconditions, Beer'slawrangefor2, 6−dibromo−4−methylaniline(DBMA)wasfoundtobe0.6−−14.0~μgmL ^-1, 0.8−−10.0 μgmL ^-1 for2, 6−dibromo−4−nitroaniline(DBNA)and0.4−−10.0 μgmL ^-1 for2, 4, 6−tribromoaniline(TBA).Themolarabsorptivityofthecolorsystemswerefoundtobe4.126~×~10⁴ lmol ^-1 cm ^-1 forDBMA, 3.254×10⁴ l~mol ^-1 cm ^-1 forDBNAand2.812×10⁴ lmol ^-1 cm ^-1 forTBA.Sandell'softhecolorreactionsare0.018 μgcm ^-2(DBMA), 0.052 μgcm ^-2(DBNA)and0.065 μgcm ^-2$ (TBA) respectively. The effect of the non-target species on the determination of bendiocarb was studied. The formation of colored derivatives with the coupling agents is instantaneous and stable for 18 h, 30 h, and 12 h. Performance of the proposed methods were compared statistically in terms Student's F and t-tests with the reported methods.     

Determination of ametryn in sugarcane and ametryn–atrazine herbicide formulations using spectrophotometric method

A sensitive spectrophotometric method has been developed for determination of ametryn in agricultural samples. The proposed method was based on reaction with pyridine and further coupling with sulfanilic acid to form a colored product. The absorbance was measured at 400 nm with a molar absorptivity of 2.1 × 10⁵ L mol⁻¹ cm⁻¹. The method shows a linear range from 0.2–20 μg mL⁻¹ with limit of detection and limit of quantification 0.16 and 0.54 μg mL⁻¹, respectively. The method has been successfully applied to the determination of ametryn in sugarcane juice and commercial formulations after separation of ametryn from triazine herbicides based on solvent extraction. Recovery values were found to be in the range of 96.0 ± 0.2% to 98.4 ± 0.1%.     

Determination of heavy metal pollution with environmental physicochemical parameters in waste water of Kocabas Stream (Biga, Canakkale, Turkey) by ICP-AES

Waste water pollution of industrial areas can answer for the serious consequences of one of the most important environmental threats to the future. In this study, inductively coupled plasma-atomic emission spectrometry method (ICP-AES) is proposed to determine heavy metals (Pb, Cu, Cd, Cr, Zn, Al, Fe, Ni, Co, Mn) and major elements (Ca, Mg) in waste water of Kocabas Stream. The concentration of metals in the waste water samples taken from 9 different stations (St.) in Biga-Kocabas Stream in November 2004 (autumn period) were determined after simple pretreatment of samples by the proposed ICP-AES method. An analysis of a given sample is completed in about 15 min for ICP-AES the method. The results of heavy metals concentrations in waste water were found between 0.00001–77.69610 mg l⁻¹ by the ICP-AES technique. The concentrations of Pb, Cd, Cu, Zn, Cr, Al, Fe, Mn, Ni, Co, Mg and Ca 0.00001 (St.3,6,7) – 0.0087 mg l⁻¹ (St.9), 0.00001 (St.4-7) – 0.0020 mg l⁻¹ (St.8), 0.00001 (St.1,3-7,9) – 0.0041 mg l⁻¹ (St.2), 0.0620 (St.2) – 0.2080 mg l⁻¹ (St.3), 0.0082 (St.6) – 0.2290 mg l⁻¹ (St.8), 0.3580 (St.2) – 1.7400 mg l⁻¹ (St.3), 0.2240 (St.1) – 0.6790 mg l⁻¹ (St.3), 0.0080 (St.1) – 1.5840 mg l⁻¹ (St.3), 0.0170 (St.3) – 0.0640 mg l⁻¹ (St.2), 0.0010 (St.1,4,5,8) – 0.0080 mg l⁻¹ (St.3), 5.0640 (St.9) – 5.2140 mg l⁻¹ (St.1) and 43.3600 (St.2) – 77.6961 mg l⁻¹ (St.9), respectively. Also we measured environmental physicochemical parameters such as temperature, salinity, specific conductivity, total dissolved solid (TDS), pH, oxidation and reduction potential (ORP), and dissolved oxygen (DO) in the waste water at sampling stations.     

Spatial and seasonal variability of pore water phosphorus concentration in shallow Lake Swarzędzkie,Poland

Pore waters play an important role in phosphorus dynamics in aquatic ecosystems. Phosphorus concentrations in pore waters are much higher than above the bottom. This is confirmed by the results of this study concerning the hypereutrophic lake. Pore water was analyzed at 11 sampling stations in the upper layer of bottom sediments. This water was separated by centrifugation and phosphorus level was measured spectrophotometrically with ascorbic acid as a reducer. Total phosphorus concentration in pore waters ranged from 0.5 to 8.1 mgP l^− 1 (mean 3.2 mgP l^− 1). Mean phosphorus concentration in pore water samples of this lake was the highest in summer and the lowest in winter. High concentrations were observed in samples from the pelagial and low from the macrophyte zone.     

A spectrophotometric assay method for vanadium in biological and environmental samples using 2,4-dinitrophenylhydrazine with imipramine hydrochloride

A simple, rapid, and sensitive method involving the interaction of 2,4-dinitrophenylhydrazine with imipramine hydrochloride in presence of vanadium (V) in sulfuric acid medium has been proposed for the determination of vanadium. The purple-colored product developed showed an absorption maximum at 560 nm and was stable for 24 h. The working curve was linear over the concentration range of 0.1–2.8 μg ml^− 1, with sensitivity of detection of 0.0124 μg ml^− 1. Molar absorptivity and Sandell’s sensitivity were found to be 2.6 × 10⁴ l/mol cm and 0.0039 μg cm^− 1, respectively. The accuracy of the proposed method was assessed by Student’s t test and variance ratio F test, and the results were on par with the reported method. The method was successfully used in the determination of V in water, human urine, soil, and plant samples, and it was free from interference by various concomitant ions.     

Solid phase extraction and determination of Cr(III) by spectrophotometry using cefaclor as a complexing reagent and FAAS

The present study reports on the application of modified groundnut shell as a new, easily prepared, and stable sorbent for the extraction of trace amount of Cr(III) in aqueous solution. 2-Hydroxybenzaldiminoglycine was immobilized on groundnut shells in alkaline medium and then used as a solid phase for the column preconcentration of Cr(III). The elution was carried out with 3 mL of 2 mol?L^?1 HCl. The amount of eluted Cr(III) was determined by spectrophotometry using cefaclor as a complexing reagent and by flame atomic absorption spectrometry (FAAS). Different experimental variables such as pH, amount of solid sorbent, volume and concentration of eluent, sample and eluent flow rate, and interference of other metal ions on the retention of Cr(III) were studied. Under the optimized conditions, the calibration curves were found to be linear over the concentration range of 13–104 and 10–75 μg?L^?1 with a detection limit of 3.64 and 1.24 μg?L^?1 for spectrophotometric method and FAAS, respectively. An enrichment factor of 200 and RSD of ±1.19–1.49 % for five successive determinations of 25 μg?L^?1 were achieved. The column preconcentration was successfully applied to the analysis of tap water and underground water samples.     

Determination of Nitrobenzene in Wastewater Using a Hanging Mercury Drop Electrode

The determination of trace amount nitrobenzene in wastewater on a hanging mercury drop electrode was studied. The determination conditions of pH, supporting electrolyte, accumulation potential, accumulation time, and voltammetric response were optimized. The sharp peak of the nitrobenzene was appeared at 0.05 V. The peak electric current was proportional to the concentration of nitrobenzene in the range of 1.47 × 10⁻⁵ ∼ 1.0 × 10⁻³ mol/l with relative standard deviations of 3.99 ∼ 8.94%. The detection limit of the nitrobenzene in water was 5 × 10⁻⁶ mol/l. The proposed method offered low limit of determination, easy operation, the use of simple instrumentation, high sensitivity and good reproducibility. It was applied to the determination of nitrobenzene in wastewater with an average recovery of 94.0% ∼ 105%. The proposed method provided fast, sensitive and sometimes real time detection of nitrobenzene.     

Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

Residues of organochlorine pesticides in water and suspended particulate matter from the Yangtze River catchment of Wuhan, China

The residues of 13 organochlorine pesticides (OCPs) in surface water and HCHs and DDTs in suspended particulate matter (SPM) from rivers and lakes in Yangtze River catchment of Wuhan, China, were investigated. The concentration of total OCPs in surface water varied from 1.01 to 46.49 ng l⁻¹ (mean 10.55 ng l⁻¹). The levels of total HCHs (ΣHCH) and total DDTs (ΣDDT) in surface water were in the range of 0.55–28.07 ng l⁻¹ and lower than detection limit to 16.71 ng l⁻¹, respectively, which was lower than Chinese standards on the whole. For OCPs residues in SPM, the mean levels varying from 0.20 to 34.72 ng l⁻¹ and 0.46 to 2.72 ng l⁻¹ for ΣHCH and ΣDDT, respectively, which ranked the relatively higher levels among Chinese studied rivers. Results from this investigation showed that previous excessive usage of technical OCPs was the main reason for the residues of HCHs and DDTs both in surface water and SPM, although some new sources were likely to occurred in the region. Apart from the OCPs in SPM originated from upstream in flood season, one of the important sources of OCP residues both in water and SPM in Yangtze River was supposed to be the inputs of its tributaries. Additionally, in situ water-SPM phase distributions of OCPs indicated that HCHs tended totransport with water as well as DDTs was prone to combine with SPM in Yangtze River catchment of Wuhan.     

Estimation of Polish cigarettes contamination with cadmium and lead, and exposure to these metals via smoking

To estimate exposure to cadmium (Cd) and lead (Pb) through cigarette smoking, the concentrations of both metals in the blood or/and urine of smokers (20 cigarettes or more per day for 10 years or longer) and their non-smoking counterparts inhabiting an environmentally unpolluted area (Bialystok, Poland) were evaluated, as well as Cd and Pb contents in the cigarette brands (produced in Poland) smoked by the participants, including intact cigarettes, pre-smoking (tobacco, paper and filter) and post-smoking (butt, ash and smoke) cigarette components. Blood and urinary Cd concentrations in the smokers have been already reported by us to be 2–4 times higher than in the non-smokers (Galażyn-Sidorczuk et al. Polish Journal of Environmental Studies, 13 (Suppl.1):91–95, 2004). All the other measurements are the subject of the present paper. Pb concentration in the blood of the cigarette smokers (52.12 ± 15.51 μg l⁻¹) was higher by 29% than in the non-smokers (40.42 ± 11.19 μg l⁻¹). The mean Cd and Pb contents in the cigarettes were 0.6801 ± 0.1765 and 0.6853 ± 0.0746 μg per cigarette, respectively. Under cigarette burning, performed using a machine for self-acting burning, on average 33% of Cd and 11% of Pb present in the whole cigarette was released into the smoke. For Cd, unlike Pb, there was a high positive correlation between the metal content in cigarettes and tobacco and its release into the smoke. Moreover, the subjects smoking cigarettes containing the highest Cd amount had higher blood Cd concentration than smokers of other cigarette brands. The results give clear evidence that in the case of inhabitants of areas unpolluted with Cd and Pb habitual cigarette smoking, due to tobacco contamination, creates a serious source of chronic exposure to these metals, especially to Cd.     

Monitoring of (bio)available labile metal fraction in a drinking water treatment plant by diffusive gradients in thin films

A performance study of diffusive gradients in thin films (DGT) and inductively coupled plasma optical emission spectrometry (ICP-OES) was applied for the monitoring of the labile fraction of metals Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn, in Sant Joan Despí Drinking Water Treatment Plant located in the South of Barcelona’s Metropolitan Area (Spain). The DWTP monitoring protocol was optimized by working for 1 day of deployment (24 h) with the DGT device in contact with both treated and river water matrixes. Additionally, it was demonstrated that an increase in the deployment time of 1 week did not decrease the evaluated concentrations of the studied metals. The quality parameters of the DGT device and ICP-OES determination, such as limit of quantification, accuracy expressed as relative error (%) and reproducibility expressed as relative standard deviation, were evaluated. Good results were obtained for all the metals in ultrapure water; limits of quantification ranged from 1.5 μg L^− 1 for cadmium to 28 μg L^− 1 for zinc when deployment time of 24 h was used and from 0.2 μg L^− 1 for cadmium to 4 μg L^− 1 for zinc when this time was increased by 1 week. Accuracy and precisions lower than or equal to 10% were obtained at a parametric concentration value of the metals regulated in the European Drinking Water Guidelines (98/83/EC). DGT deployment was tested in river and treated water, and good results were obtained for Cd, Ni, Co and Zn, whereas for the other metals, a continuous control of their metallic labile fractions was monitored. Therefore, DGT device allows the continuous monitoring of the labile metal species in a drinking water treatment plant.     

Flow injection online spectrophotometric determination of uranium after preconcentration on XAD-4 resin impregnated with nalidixic acid

In this work, spectrophotometer was used as a detector for the determination of uranium from water, biological, and ore samples with a flow injection system coupled with solid phase extraction. In order to promote the online preconcentration of uranium, a minicolumn packed with XAD-4 resin impregnated with nalidixic acid was utilized. The system operation was based on U(VI) ion retention at pH 6 in the minicolumn at flow rate of 15.2 mL min^?1. The uranium complex was removed from the resin by 0.1 mol dm^?3 HCl at flow rate of 3.2 mL min^?1 and was mixed with arsenazo III solution (0.05 % solution in 0.1 mol dm^?3 HCl, 3.2 mL min^?1) and driven to flow through cell of spectrophotometer where its absorbance was measured at 651 nm. The influence of chemical (pH and HCl (as eluent and reagent medium) concentration) and flow (sample and eluent flow rate and preconcentration time) parameters that could affect the performance of the system as well as the possible interferents was investigated. At the optimum conditions for 60 s preconcentration time (15.2 mL of sample volume), the method presented a detection limit of 1.1 μg L^?1, a relative standard deviation (RSD) of 0.8 % at 100 μg L^?1, enrichment factor of 30, and a sample throughput of 42 h^?1, whereas for 300 s of the preconcentration time (76 mL of sample volume), a detection limit of 0.22 μg L^?1, a RSD of 1.32 % at 10 μg L^?1, enrichment factor of 150, and a sampling frequency of 11 h^?1 were reported.     

Eutrophication and Sedimentation Patterns in Complete Exploitation of Water Resources Scenarios: An Example from Northwestern Semi-arid Mexico

Water requirements to supply human needs lead water stakeholders to store more water during surplus periods to fulfil the demand during – not only – scarcity periods. At the reservoirs, mostly those in semi-arid regions, water level then fluctuates extremely between rises and downward during one single year. Besides of water management implications, changes on physical, chemical and biological dynamics of these drawdown and refilling are little known yet. This paper shows the results, throughout a year, on solids, nutrients (N and P), chlorophyll-a, and sedimentation changes on the dynamics, when the former policy was applied in a reservoir from the semi-arid Northwestern Mexico. Water level sinusoidal trend impinged changes on thermal stratification and mixing, modifying nutrient cycling and primary producer responses. According to nitrogen and phosphorus concentration as well as chlorophyll-a, reservoir was mesotrophic, becoming hypertrophic during drawdown. Nutrient concentrations were high (1.22 ± 0.70 and 0.14 ± 0.12 mg P l⁻¹), increasing phosphorus and lowering N:P significantly throughout the study period, although no intensive agricultural, no urban development, neither industrial activities take place in the watershed. This suggests nutrient recycling complex mechanisms, including nutrient release from the sediment–water interface as the main nutrient pathway when shallowness, at the same time as mineralization, increases. Outflows controlled nitrogen and phosphorus availability on the ecosystem while organic matter depended on river inflows. As on other subtropical aquatic ecosystems, nitrogen limited primary productivity (Spearman correlation R = 0.75) but chlorophyll-a seasonal pattern showed an irregular trend, prompting other no-nutrient related limitants. Shallowness induced a homogeneous temporal pattern on water quality. This observed temporal variability was mainly explained statistically by changes on solids (mineral and organic), chlorophyll-a and flows (62.3%). Annual sedimentation rates of total solids ranged from 11.73 to 16.29 kg m⁻² year⁻¹ with organic matter comprising around 30%. N:P ratio on sedimentation rates were as high as could be expected in a resuspension dominated ecosystem, and spatially inverse related with N:P ratio on bottom sediments. Distance from river inlet into the reservoir reveals a marked spatial heterogeneity on solid and nitrogen sedimentation, showing the system dependence on river inflows and supporting resuspension as the main phosphorus pathway. Accretion rates (2.19 ± 0.40 cm year⁻¹) were not related to hydrological variability but decreased with the distance to the river input. Total sediment accumulation (9,895 tons km⁻² year⁻¹) denotes siltation as other serious environmental problem in reservoirs but possibly not related with operational procedures.     

Modeling Phosphate Influence on Arsenate Reduction Kinetics by a Freshwater Cyanobacterium

Arsenic speciation in natural surface-water systems can be highly impacted through biological processes that result in non-thermodynamically predicted species to dominate the system. In laboratory experiments, arsenate reduction by a freshwater cyanobacterium exhibited saturation kinetics increasingly inhibited by elevating solution phosphate concentrations. Approximately 100% arsenate reduction occurred by days 4, 7, and 10 in the low (0.35 μm), middle (3.5 μm), and high (35 μm) phosphate treatments, respectively, with maximum arsenate reduction rates ranged from 0.013 μmol As g C⁻¹ day⁻¹ in the high-phosphate treatment to 0.398 μmol As g C⁻¹ day⁻¹ in the low-phosphate treatment. Saturation kinetic models were utilized to evaluate the impact of cell growth and arsenate-phosphate uptake competition on arsenate reduction rates by the cyanobacterium. Results showed reduced arsenicals dominate arsenic speciation once growth reached steady state, indicating reduced arsenicals may dominate natural systems, even when considering conservatively high, abiotic arsenic reoxidation.     

Removal of hexavalent chromium from contaminated ground water using zero-valent iron nanoparticles

Batch experiments were conducted on ground water samples collected from a site contaminated with Cr(VI) to evaluate the redox potential of zero-valent iron (Fe⁰) nanoparticles for remediation of Cr(VI)-contaminated ground water. For this, various samples of contaminated ground water were allowed to react with various loadings of Fe⁰ nanoparticles for a reaction period of 60 min. Data showed 100% reduction of Cr(VI) in all the contaminated ground water samples after treatment with 0.20 gL⁻¹ of Fe⁰ nanoparticles. An increase in the reduction of Cr(VI) from 45% to 100% was noticed with the increase in the loading of Fe⁰ nanoparticles from 0.05 to 0.20 gL⁻¹. Reaction kinetics of Cr(VI) reduction showed pseudo first-order kinetics with rate constant in the range of 1.1 × 10⁻³ to 3.9 × 10⁻³ min⁻¹. This work demonstrates the potential utility of Fe⁰ nanoparticles in treatment and remediation of Cr(VI)-contaminated water source.     

Pesticide residues in rain water from Hisar, India

Presence of pesticide residues was studied in rain water during 2002 employing multi residue analysis method by gas liquid chromatography equipped with ECD and NPD detectors and capillary columns. The presence of pesticide residues in surface aquatic system triggered the investigation of the presence of pesticides in rain water. A total of 13 pesticides were detected in rain water samples. Among the different groups of pesticides, organochlorines were present in the range of 0.041–7.060 ppb with maximum concentration of p,p’-DDT up to 7.060 μg l⁻¹. Synthetic pyrethroids were present ranging from 0.100 to 1.000 μg l⁻¹ and organophosphates in the range of 0.050–4.000 μg l⁻¹ showing maximum contamination with cypermethrin (1.000 μg l⁻¹) and monocrotophos (4.000 μg l⁻¹) of the respective groups. Almost 80% samples showed the residues above MRL of 0.5 ppb fixed for multi residues and on the basis of single pesticide, 16–50% samples contained residues above the MRL value of 0.1 ppb.