基于生命周期评价的城市固体废弃物处理模式研究进展

通过回顾2003-2010年国内外不同城市固体废弃物管理体系生命周期评价结果,列举比较了不同固体废弃物处理模式下的全球变暖潜力、酸化潜力和净能源效用等影响评价因子的大小,得出城市固体废弃物处理模式环境影响等级:填埋的环境影响潜值最大,焚烧的环境影响潜值小于填埋,而结合堆肥后环境影响潜值降低;此外,将固体废弃物资源化引入到处理模式后,特别是垃圾源头分类回收后,环境影响潜值大大降低。结合我国城市固体废弃物处理现状,提出单一的处理模式应转变为综合处理模式,多种生活垃圾处理方式适当的有机结合,因地制宜地开展固体废弃物资源化管理,以及餐厨垃圾源头分类收集处理等建议,为政府能有效利用城市固体废弃物处理设施的能力提供参考。     

Life-cycle assessment of four types of floor covering

Four types of floor covering have been investigated with respect to their environmental impact: linoleum, cushion vinyl, tufted carpet with a woollen pile and tufted carpet with a polyamide pile. The analysis relates to all stages in the life-cycle (from ‘cradle to grave’) and focuses on floor coverings for domestic use. The analysis is performed by means of the method for life-cycle assessment (Dutch approach). Each floor covering is assessed with regard to its environmental impact. This impact can be of various type: depletion of raw materials, cumulative energy requirement, global warming, acidification, tropospheric ozone creation, stratospheric ozone depletion, eutrophication, production of waste and human health. The inventory of environmental interventions (materials, energy requirements, waste and emissions to air, water and soil) was fairly complete. Most interventions relating to the processes that make up the life-cycle of the floor coverings in question could be quantified. A large part of the data is associated with the process energy requirement. In general these data are quite reliable. The results of the impact assessment for linoleum differs considerably from those for other types of floor coverings. Linoleum turns out to be the most environmentally favourable floor covering. It was not possible to differentiate between the environmental impact of cushion vinyl, tufted carpet with a woollen pile and tufted carpet with a polyamide pile.     

我国不同区域玉米施肥的生命周期评价

以吉林、陕西、河南、湖南、广西等玉米主产省份为例,以生产1t玉米为评价的功能单元,应用生命周期评价(LCA)方法,比较了不同生态区玉米生产过程中施肥的资源环境影响潜力.结果表明,五省环境影响综合指数大小依次为广西0.315、湖南0.309、河南0.273、陕西0.238、吉林0.183.几种资源环境影响中,潜力大小依次是富营养化、环境酸化、温室效应、土地利用和能源消耗,其中,施用氮肥引起的氨挥发是导致富营养化和酸化的主要原因.农户间玉米施肥的资源环境影响潜力差异很大,环境影响综合指数变异范围在41.2%～81.6%之间,且以湖南省最高,吉林省最低.如果将玉米追肥由撒施都改为穴施,五省的环境影响综合指数将降低8.5%～34.1%.总体而言,在目前生产条件下,吉林省具有资源环境影响较低的优势;富营养化是最主要的环境影响类型,而改进施肥方式、减少氨挥发是降低玉米施肥资源环境影响的关键技术途径.     

Minimising environmental impact by sequencing cultured dairy products: two case studies

The increased production of cultured milk products has environmental consequences. To counteract the environmental impact from the dairy industry, it is important to process the products in a sequence designed to minimise waste. In a previous study a model was constructed to minimise the waste caused by a sequence for a given set of products and to calculate the environmental impact of a waste minimised sequence. This study applies successfully the model in case studies at two dairies. The number of products to be sequenced varied: Dairy A had 34 products and Dairy B had 16. The sequenced products were yoghurt, sour cream, cold sauce and crème fraiche, all with multiple flavours. The difference in number of products to be sequenced offered the opportunity to use both of the two model sequencing solutions: the heuristic and the optimised. The role of frequency of each product to be sequenced was investigated. Scenarios with differing frequencies were used in the case studies. The result showed clearly that the waste caused by a sequence decreased when product frequency was reduced. From a life cycle perspective, the environmental impact of processing cultured milk products can be greatly reduced by adopting sequences with fewer changes of product.     

生命周期评价在我国乙烯行业环境评估中的应用

采用IMPACT 2002+方法对我国的乙烯行业进行了生命周期评价(LCA)研究,分析了包括原油生产、原煤生产、原料生产、乙烯生产和电力生产5个环节在内的13种污染物排放对乙烯行业的环境影响.结果表明,乙烯工业对不可再生能源原油的消耗,对温室效应、呼吸效应和水体酸化等的环境影响潜值最为严重.减少乙烯生产环节和原料生产环节(炼油过程)的SO2、NOx、CO2等气体的排放,以及原油开采过程的CH4逸放,是改善环境影响的关键因素.同时,以石脑油为原料裂解乙烯工艺比以轻烃为原料制乙烯工艺对环境的影响要小.而煤制烯烃工艺对环境影响较大,仍具有一定改进空间.总体来看,经过近十年发展,我国乙烯行业对资源利用效率和缓解尾气排放两方面都有显著的提升.     

Environmental aspects when manufacturing products mainly out of metals and/or polymers

The most fundamental aspect in the ISO 14001 standard Environmental management systems—Specification with guidance for use is to find out ways by which an organisation influences environment to a significant degree. This paper examines environmental data from companies manufacturing products mainly from metals and/or polymers. The data were collected in a uniform way by use of special guidelines. Weighting or valuation methods often used in life cycle assessments were used to quantitatively compare and rank environmental aspects. The study results suggest that, in general, the largest environmental impact in the investigated manufacturing sub-sector can be associated with product use and/or disposal phases. This in turn shows a need for more attention on environmental work on the design for environment than what the ISO 14001 standard requires. It is further suggested that weighting or valuation methods can aid in determining the significance of environmental impacts and aspects in the context of ISO 14001.     

ECO-design of reuse and recycling networks by multi-objective optimization

An ECO-optimized reuse of process liquors addresses the financial gain and the effective use of resources. In processes that have a potential for process liquor recovery, the minimization of both economic and environmental burdens can be realised by an ECO-optimal design of reuse and recycling network (RRN).In this paper, a procedure for synthesizing such an RRN for a metal finishing process is investigated. The simultaneous analysis of environmental impact sensitivity (SAEIS) based on a superstructure approach, combined with multi-objective optimization is performed by mixed-integer nonlinear programming (MINLP). This allows an “eco–eco” trade-off i.e. total annualized cost and environmental impacts are minimized simultaneously. By varying the weighting factor, different RRN alternatives were generated. A replacement of the standard and closed-loop system by these solutions, even for the environmentally friendliest case, yielded a reasonable cost saving on raw material's inputs.     

LCA of spent fluorescent lamps in Thailand at various rates of recycling

This paper presents environmental impact of a fluorescent lamp (a long straight tube 36 watts, 200 g and 13,600 h for mean time before failure) when considering different disposal methods (recycle and non-recycle) of its spent fluorescent lamp (SFL). The study was applied for the case in Thailand using life cycle assessment (LCA) as a tool. All materials, energy use, and pollutant emissions to the environment from each related process were identified and analyzed. Impact assessment was conducted for 10 environmental impact potentials: carcinogens, respiratory organics, respiratory inorganics, climate change, radiation, ozone layer, ecotoxicity, acidification/eutrophication, land use and minerals. The analysis followed Eco-Indicator 99 method, individualist version 2.1. The main focus of the study was to compare the impact of SFL recycling with non-recycling before landfilling. The impact intermittent activities, production of raw material and energy used in all the concerned processes were taken into account. However, transportation activities were excluded. The results showed that for all recycling rates, cement production is the main contributor to the environmental impacts, while sodium sulfide production is second and electrical production, the third. Mercury vapor emission showed a small contribution in carcinogens and ecotoxicity. The impacts are reduced when recycling rate is increased. The reduction of cement consumption in disposal processes or the process improvement of cement production may also help to reduce environmental impacts.     

Development and environmental improvements of plastics for hydrophilic catheters in medical care: an environmental evaluation

Single-use medical devices have been under close scrutiny for several years, especially the choice of plastic materials. Many different requirements such as medical safety, treatment functionality and efficiency, environmental performance, etc. have to be fulfilled. Today, the most commonly used materials for hydrophilic urinary catheters are polyvinylchloride (PVC) and thermoplastic polyurethane (TPU). In this research study, these two materials' environmental performance was evaluated. In light of the knowledge gained in that study a new plastic material for use in urinary catheters was developed. The aim of the development of this new material was to design a high performance material with superior environmental performance. The newly developed plastic material is a polyolefin-based elastomer. The ecological environmental performance of the new material was evaluated and compared to the existing plastic materials. The study focused exclusively on the choice of plastic materials and their ecological environmental performance.The analysis has been performed using a system perspective and a life cycle assessment (LCA) methodology. The functional unit has been set to the treatment of one patient during one year. The results from the LCA models have been presented both in terms of direct inventory data, such as energy use and formed emissions, and in terms of the results from four different impact assessment methods. Analysis of the results based on direct inventory data, i.e. common inventory results such as energy resource uses and emissions of CO₂, NO_x and SO₂ show an overall better environmental performance for the new polyolefin-based elastomer compared to the existing PVC and TPU plastic materials. The normalization and weighting steps in the analyzes have indicated the importance of energy resource uses and global warming as indicator for the environmental performance even if other impact categories also can play a role. In the environmental impact assessment, the polyolefin-based elastomer showed a clearly better environmental performance than the TPU material. Compared to PVC plastic material the new polyolefin-based elastomer showed an almost equivalent environmental performance. This can be mainly explained by the different materials' energy use. The new material has thus also shown to be an environmentally good alternative to PVC if a PVC-free material is requested. Basing the plastic formula, on simple bulk plastics with low energy use in the production of single-use medical devices, has been shown to be a successful method of producing high quality products with superior environmental performance.     

北京电动出租车与燃油出租车生命周期环境影响比较研究

燃油机动车尾气排放是导致城市包括雾霾在内的大气环境问题的主要来源之一.以电动汽车替代传统燃油车是当前各国解决城市大气污染问题的重要举措.北京于2011年启动了电动出租车推广计划.为比较北京市迷迪电动汽车和现代燃油车生命周期的环境影响,运用生命周期评价方法,基于Ga Bi4.4软件,选用CML2001和EI99影响评价模型对两款车的生产、使用和报废回收全生命周期过程的环境影响进行了定量评价,并针对汽车报废里程和电力能源结构进行了敏感性分析.结果表明,从全生命周期视角,根据EI99评价模型,迷迪电动汽车环境影响总体上优于现代燃油车,尤其在削减化石能源消耗方面优势凸显,但在生态系统质量影响及人体健康影响方面却略有增大的趋势;利用CML2001模型对比分析得出迷迪电动汽车比燃油出租车在对非生物资源消耗、全球变暖以及臭氧层损耗等方面有明显改善;但在生产阶段尤其是动力系统生产方面在非生物资源消耗、酸化、富营养化、全球变暖、光化学臭氧合成、臭氧层损耗、生态毒性等生态环境影响却均有增大趋势.使用阶段电力生产是迷迪电动汽车非生物资源消耗、酸化、富营养化、全球变暖、光化学臭氧合成、生态毒性等环境影响的主要来源;而现代燃油出租车使用阶段的环境影响主要来源于尾气排放和汽油生产,其中尾气排放是造成现代燃油车在富营养化和全球变暖等方面影响潜值较大的主要原因;基于清单数据库,针对致霾因子影响分析得出,在2010年北京市电力能源驱动下,迷迪电动车明显增加了超细颗粒物(PM2.5)、氮氧化物(NOx)、硫氧化物(SOx)、挥发性有机物(volatile organic compouds,VOCs)等因子的全生命周期的排放,而同时降低了氨气(NH3)的排放量,使用阶段排放的差别是造成上述趋势的主要原因.对关键因素敏感性分析发现,随着报废里程以及清洁能源比例的增加,迷迪电动汽车相对现代燃油车的单位里程碳减排量呈现增加的趋势.清洁电力能源的使用可大幅降低迷迪电动汽车致霾污染物的排放量.根据分析结果,为北京市电动车的推广提出了对策建议.     

Development of weighting factors in the context of LCIA

A new method is proposed for the identification of environmental impact category weights using a panel approach and a MultiCriteria Decision Aid (MCDA) for use within the weighting step in Life Cycle Impact Assessment (LCIA). Seven environmental criteria were assessed by panellists and weights were obtained. The weighting factors of 10 impact categories were calculated according to a four-step procedure: (1) criteria definition; (2) scoring of each impact category (scale of 1–100, 100 causing the most damage) according to seven environmental criteria (human health, ecosystem health, resource consumption as well as scale, duration, reversibility and “distance-to-target”) by a panel of Canadian citizens; (3) assessment of each criterion's importance using a “resistance to change” approach; and (4) criteria aggregation (through MCDA) which allowed the calculation of a final weighting score for each impact category. The greatest advantage of this procedure is the ease with which it can be implemented in a Life Cycle Assessment (LCA) study whatever the LCIA method is used. Integrating weighting factors specific to the Canadian environmental context into a site-dependant LCIA method will contribute to the progress of LCA in Canada.     

An assessment of greenhouse gas emissions and material flows caused by the Finnish economy using the ENVIMAT model

An environmentally extended input-output (EE-IO) analysis - environmental impacts of material flows caused by the Finnish economy - was carried out in order to improve data on production and consumption in Finland. The study resulted in the ENVIMAT model, which can be used to analyze the relationship between material flows, environmental impacts and the economy. The model is based on monetary and physical input-output tables and an environmental life-cycle impact assessment. This article summarizes the main methodological aspects and findings regarding the material flows and climate impacts caused by the Finnish economy in 2002 and 2005. The Finnish model has relatively detailed input data with 150 industries and 918 products and the data on imports was assessed according to a mixed approach with the help of life-cycle inventory data. The results of the model showed that the Finnish economy uses imported material resources as much as domestic resources. Life-cycle greenhouse gas (GHG) emissions caused by imports were equivalent to 70-80% of domestic emissions. The GHG emissions embodied in imports (emissions abroad) and exports (emissions within Finland) were of the same magnitude. The analysis showed that the service sector accounted for 44% of GHG emissions caused by the domestic final use of products. Analysis of the results also showed that the indicator of total material requirement (TMR) should not be used for environmental impact comparisons of products and services. In the future, the aim is to use the ENVIMAT model for assessing temporal changes in the economy; for monitoring sustainable development; for planning climate change mitigation; and for identifying important factors in the economy and assessing their impacts.     

Towards sustainability in urban water: a life cycle analysis of the urban water system of Alexandria City,Egypt

Urban water authorities and water planers in many countries are struggling to satisfy the growing urban water and sanitation demands, while at the same time achieving sustainability of the urban water system. This research focused on the assessment of the environmental impact of today's Alexandria's urban water system and on the identification of options to improve the sustainability of the system. Therefore, a life cycle assessment (LCA) methodology was used. The urban water system was modelled using SimaPro software, and the impacts of various options on the system were analyzed based on the Eco-indicator 99 assessment method. The results show that the highest impact in today's system is generated by the disposal of primary treated wastewater (68% of the total impact) and by high-energy-consuming water treatment plants (18% of the total impact). The research assessed different scenarios for improving the environmental performance of the system and a paradigm shift (decentralization and separation at-source of different kinds of household wastewater) was found to be the preferred long-term scenario.     

Environmental indicators for small and medium enterprises in the Philippines: An empirical research

Environmental indicators allow a firm to make measurements related to its environmental performance. In practical terms, they can be used to form a measuring, benchmarking and monitoring tool to track environmental performance for small and medium enterprises (SMEs).Within an Environmental Management System (EMS), environmental indicators can be used to check if a firm has met the targets it is required to set for itself. It can also be used in firms that have not yet implemented an EMS. The use of an Environmental Indicators System (EIS) is thus recommended for SMEs, many of which do not have an EMS, in order to enhance their environmental performance. As noted in A Guide to Corporate Environmental Indicators published by the Federal Environment Ministry (Bonn) and the Federal Environmental Agency (Berlin), three categories of environmental indicators can be developed, depending on whether they describe: (1) a company's environmental impact (environmental performance); (2) the management's environmental activities; or (3) the external condition of the company's environment.The objective of this paper is to present how environmental indicators were established and implemented for Philippine SMEs and to show that the indicators significantly correlate with the environmental performance of the SMEs. In order to test this hypothesis, a survey-questionnaire was designed and administered among SMEs covering six industrial sectors in the Philippines. Based on the survey responses, a Gap analysis between the environmental performances of SMEs and state-of-the-art companies was performed. The Gap analysis showed that environmental indicators were indeed able to capture the features of actual environmental performance.Further, a structural equation model was proposed and validated. It yielded a significant linkage between the environmental indicators and environmental performance.     

Assessment of the environmental impact of carnivorous finfish production systems using life cycle assessment

When evaluating the environmental impacts of finfish production systems, both regional impacts (e.g., eutrophication) and global impacts (e.g., climate change) should be taken into account. The life cycle assessment (LCA) method is well suited for this purpose. Three fish farms that represent contrasting intensive production systems were investigated using LCA: rainbow trout (Oncorhynchus mykiss) in freshwater raceways in France, sea-bass (Dicentrarchus labrax) in sea cages in Greece, and turbot (Scophtalmus maximus) in an inland re-circulating system close to the seashore in France. Two main characteristics differentiated the three farm systems: feed use and energy use. Emission of nitrogen and phosphorus accounted for more than 90% of each farm's potential eutrophication impact. In the trout and sea-bass systems, feed production was the major contributor to potential climate change and acidification impacts and net primary production use (NPPU). In these systems, the main source of variation for environmental impacts was the feed conversion ratio. Results from this study indicate that the sea-bass cage system was less efficient than the trout raceway system, with a higher level of potential eutrophication (65% greater) and NPPU (15% greater). The turbot re-circulating system was a high energy-consumer compared to the trout raceway system (four times higher) and the sea-bass cage system (five times higher). Potential climate change and acidification impacts were largely influenced by energy consumption in the turbot re-circulating system. In the turbot re-circulating system 86% of energy use was due to on-site consumption, while in the sea-bass cage farming system 72% of energy use was due to feed production. These results are discussed in relation to regional contexts of production and focus attention on the sensitivity of each aquatic environment and the use of energy carriers.     

基于LCA的聚乳酸快递包装环境友好性评价

以聚乳酸快递包装为研究对象,运用生命周期评价（LCA）方法对聚乳酸快递包装的原料获取、加工、使用及5种处置情景的环境影响进行比较,并采用累积能源需求（CED）方法对能源消耗情况进行分析.功能单位（1000个规模为25×35cm的聚乳酸快递袋,918kg）快递袋原材料获取、加工及使用阶段的环境影响潜能值分别为1.09×10^-9、5.64×10^-10、1.24×10^-10.海洋水生态毒性是聚乳酸快递袋环境影响的主要类型,占77%;非生物资源耗竭潜能值、人类毒性次之,分别占9%和6%.能源消耗主要类型为不可再生能源,占总能源消耗的89%,其中,快递袋使用阶段为主要贡献阶段,占比为91%.处理阶段5种处置情景中情景Ⅴ（焚烧47%,填埋13%,回收40%）对环境最为友好,通过增加焚烧和回收处置的比例,减少填埋比例对环境有着更为积极的影响.     

Evaluating the sustainability of diets–combining environmental and nutritional aspects

This study examined two methods for jointly considering the environmental impact and nutritional quality of diets, which is necessary when designing policy instruments promoting sustainable food systems. Both methods included energy content and 18 macro- and micronutrients in the diet, the climate impact, land use and biodiversity damage potential. In Method 1, the content of different nutrients in the diet was normalised based on recommended intake or upper levels for average daily intake and presented together with the environmental impacts, which were normalised according to estimated sustainable levels. In Method 2, the nutritional quality of different diets was considered by calculating their nutrient density score, and the environmental impact was then expressed per nutrient density score. Three diets were assessed; a diet corresponding to Nordic recommendations, the current average Swedish diet and a lifestyle Low Carbohydrate-High Fat (LCHF) diet. Method 1 clearly showed that the climate impact was far beyond the sustainable level for all diets, while land use was within the sustainability limit for the recommended diet, but not the other two. Comparisons based on nutrient density scores depended on the score used, but the current and LCHF diets had more impact than the recommended diet (less livestock products) for all but one score. Over- and under-consumption of nutrients were clearly shown by Method 1 but not possible to distinguish with Method 2, as normalisation was not possible, making it difficult to evaluate the absolute scale of the impacts when nutrient density scores were used. For quantitative information on the environmental and nutritional impacts of diets as support in decision-making processes, it is important that data presentation is transparent. There is limited value in reducing results to a low number of indicators that are easy to read, but difficult to interpret, e.g. nutrient density score. Method 1 allows combined assessment of diets regarding environmental impact and nutritional intake and could be useful in dietary planning and in development of dietary recommendations and other policy instruments to achieve more sustainable food systems.     

基于LCA的聚乳酸快递包装环境友好性评价

以聚乳酸快递包装为研究对象,运用生命周期评价（LCA）方法对聚乳酸快递包装的原料获取、加工、使用及5种处置情景的环境影响进行比较,并采用累积能源需求（CED）方法对能源消耗情况进行分析.功能单位（1000个规模为25×35cm的聚乳酸快递袋,918kg）快递袋原材料获取、加工及使用阶段的环境影响潜能值分别为1.09×10^-9、5.64×10^-10、1.24×10^-10.海洋水生态毒性是聚乳酸快递袋环境影响的主要类型,占77%;非生物资源耗竭潜能值、人类毒性次之,分别占9%和6%.能源消耗主要类型为不可再生能源,占总能源消耗的89%,其中,快递袋使用阶段为主要贡献阶段,占比为91%.处理阶段5种处置情景中情景Ⅴ（焚烧47%,填埋13%,回收40%）对环境最为友好,通过增加焚烧和回收处置的比例,减少填埋比例对环境有着更为积极的影响.     

Development of an eco-ideation tool to identify stepwise greenhouse gas emissions reduction options for consumer goods

Pressure on consumer goods manufacturers to develop new products with significantly less environmental impact is growing, through increased consumer awareness of environmental issues and governments setting ambitious emissions reductions targets. A strategic response to this pressure is to prepare a portfolio of innovative product ideas to meet a range of future emissions reductions targets. However, although extensive work exists on ideation (the generation of novel product ideas) and eco-design (design for reduced environmental impact), eco-ideation (generation of ideas that particularly aim to reduce environmental impacts) has had little attention. The challenge of eco-ideation is to release the creativity of a broad range of employees, only few of whom may be familiar with the drivers of environmental impact.This paper proposes a novel tool to facilitate the generation of radical product and process ideas giving step-change reductions in greenhouse gas emissions. The features of products and processes that drive greenhouse gas emissions across the product life cycle were characterized with a set of indicators. A simple visual tool was created to show these indicators on a sliding scale between best and worst imaginable performance. A leading question associated with each slider was designed to stimulate lower impact ideas. The tool was iteratively refined and simplified through structured testing with individuals from across a range of roles and differing knowledge of environmental impacts. The final eco-ideation tool used 14 scales, with leading questions for each scale developed to stimulate idea generation.The tool’s effectiveness was evaluated through use in a series of 15 individual workshops and compared with the outcomes of an equal number of conventional 12-person group-brainstorming sessions. The comparison suggests that using the simple tool generally leads to a wider range of more radical ideas than emerge from group brainstorming.     

装备外部冷却方法及在环境试验中的应用概述

首先简述了机载电子装备冷却的基本要素。其次,详细介绍了机载电子装备环控通风冷却、液体冷却方式的具体要求及不同的接口方式。然后,通过实例介绍了装备的不同冷却方式、方法及在实际中的应用。通过试验研究发现,不同的冷却方式不仅对机载电子装备本身有不同程度的影响,还对机载电子装备在环境试验过程中产生极大的影响,从而提出在实际应用中,应着重依据分析的内容考虑机载电子装备需采用的冷却方式,以达到最好的实施效果。