Free radical-assisted electrocoagulation processes for wastewater treatment

The combination of electrocoagulation with another process is a promising approach to enhance the removal efficiency of water pollutants. For instance, free radical-assisted electrocoagulation is a new combination showing higher performance. There are different combinations depending on the free radical source. This article reviews free radical-assisted electrocoagulation processes. We discuss electrocoagulation mechanisms; ozone-assisted electrocoagulation processes; advanced oxidation-assisted electrocoagulation processes; and ultrasound-assisted electrocoagulation. We present kinetic models used in free radical-assisted electrocoagulation, scale-up of free radical-assisted electrocoagulation and cost estimation. The major points are: most of the available studies have been done at laboratory scale with synthetic wastewater, and lack holistic and systematic approaches to consider the process complexity. The performance of the combined process is improved, and the removal efficiency is increased especially with ozone-assisted electrocoagulation, which gives a removal efficiency of more than 95%. The use of ultrasound energy with electrocoagulation is advantageous in reducing the problem of electrode passivation.     

Improved power density and Cr/Pb removal using ozone in a microbial desalination cell

Environmental Chemistry Letters - Microbial desalination cells are promising bio-electrochemical technologies for water desalination, treating wastewater and bioelectricity production. In this...     

Changes in chemical forms of lead in temperate and semiarid soils in sterile and unsterile conditions

Sequential extraction has been used as a suitable method for fractionation of chemical forms of trace elements and study of their plant availability. Surface soils were sampled from Guilan and Hamadan provinces in north and northwest of Iran with temperate and semiarid climates. The chemical forms of Pb in the Pb(NO₃)₂-treated (400 μg Pb g⁻¹) soils have been studied in solid state incubation (FC) at 27°C in sterile and unsterile conditions. After 20 min and 3600 h a sequential extraction scheme was also used to fractionate Pb of incubated samples into soluble-exchangeable (Sol-Exch), carbonates associated (ACar), organic matter associated (AOM), Mn oxide associated (AMnOx), Fe oxide associated (AFeOx), and residual (Res) forms. Temperate soil samples had higher clay content, cation exchange capacity (CEC), dichromate oxidable organic carbon (OC), total Kjeldahl-nitrogen (TN), biological activity, amorphous and crystalline Fe and Al, but semiarid soil samples had higher sand content, pH, equivalent calcium carbonate (ECC), available P and K. Soil lead fractionation revealed that in both groups of soils Pb largely changed to exchangeable, carbonates associated and organic associated forms after 20 min. The chemical forms of Pb differed widely among soils after 3600-h incubation. The conversion rate of Pb from more available forms to less available forms was higher in temperate soils with higher Fe–Mn oxides and OM contents compared to semiarid soils. In temperate soils after 3600-h incubation, greater content of Pb was observed in Res (68%), AOM (14%), ACar (7%), and AMnOx (5%) fractions. However, in semiarid soils greater content of Pb was observed in Res (61%), ACar (16%), Sol-Exch (8%), and AOM (8%) fractions. The sum of AMnOx and AFeOx chemical forms for Pb in semiarid soils compared to temperate soils was lower. It was only 7% against 9% in temperate soils. Soil microorganisms in unsterile soils had significant effect on AOM, AFeOx and Res fractions of Pb. They not only increased AOM and AFeOx fractions of Pb in soils but also decreased Res fraction of Pb significantly.     

Novel Sorbent of Sand Coated with Humic Acid-Iron Oxide Nanoparticles for Elimination of Copper and Cadmium Ions from Contaminated Water

Journal of Polymers and the Environment - Nanoparticles of humic acid and iron oxide were impregnated on the inert sand to produce sorbent for treating groundwater contained of cadmium and copper...     

Green Synthesis and Characterization of Silver Nanoparticles Using Elaeagnus angustifolia Bark Extract and Study of Its Antibacterial Effect

Journal of Polymers and the Environment - Nowadays, many chemical methods have been proposed for the synthesis of silver nanoparticles, but green synthesis has received more attention due to its...     

Applying machine learning approach in recycling

Journal of Material Cycles and Waste Management - Waste generation has been increasing drastically based on the world’s population and economic growth. This has significantly affected human...     

Properties of Biocomposite Films From PLA and Thermally Treated Wood Modified with Silver Nanoparticles Using Leaf Extracts of Oriental Sweetgum

Journal of Polymers and the Environment - The technological, thermal, and antimicrobial properties of biocomposite films produced from polylactic acid (PLA) and thermally treated wood flour with in...     

Evaluation of Different Scales for Measurement of Perceived Physical Strain During Performance of Manual Tasks

The main objective of this study was to evaluate different scales of perceived strain during the performance of various physical tasks. A total of 52 male and female participants took part in 4 experiments to achieve the study objective. The results suggest that a bipolar comfort-discomfort scale is a more appropriate instrument than a discomfort scale for assessing cumulative physical stresses at work, especially at the beginning of the shift. For assessing discomfort at the end of the work shift, a unipolar scale may also be used. On the basis of the obtained results, red, green, and yellow zones are suggested to establish priorities for work redesign efforts in ergonomic control programs.     

Optimizing safety-constrained solvent selection for process systems with economic uncertainties

Solvents are very commonly used in industrial facilities for a multitude of reasons. Traditionally, solvent selection has been based on minimizing the process operating cost while satisfying a set of operational requirements. Regrettably, safety considerations have typically been overlooked during the design phase. In this paper, a systematic approach is introduced to integrate safety issues into solvent selection and provides a computationally effective method for establishing tradeoffs between the economic and safety objectives. In order to quantify the risk associated with the solvent, we focus on the potential spillage of the solvent and introduce a risk index that is a function of the amount of solvent used and stored, as well as the Permissible Exposure Limit (PEL) dictated by regulatory directives. An optimization formulation is developed and the associated mathematical program solved to select optimal solvents and blends while incorporating economic, technical, and safety considerations. Tradeoff (Pareto) curves are developed to represent the multi-objective optimization results and tradeoffs. Furthermore, economic-data uncertainty and variability over expected ranges are included in the optimization formulation to conduct an insightful sensitivity analysis. Finally, an illustrative case study is considered via increasing levels of complexity in order to evaluate the proposed optimization method which considers both operating cost and safety risk implications in the presence of economic uncertainties.     

Multiple dimensions of work-related risk factors and their relationship to work ability among industrial workers in Iran

Objectives. The present study was designed to investigate the simultaneous effects of physical, psychosocial and other work-related risk factors on the work ability index (WAI) score among industrial workers. Methods. This study used a cross-sectional design with a questionnaire survey. A total of 280 workers were included in the study. Data were collected using three questionnaires including the Persian version of the WAI, the Persian version of the job content questionnaire and an author-developed measure (to assess work-related factors, health-related factors and socio-demographic characteristics). Results. The majority of the participants were young, but they had poor WAI scores (mean 37.3?±?6.4) and 44.3% of them had poor or moderate work ability. Occupational accidents and injuries were found to be the strongest predictors of WAI scores. Additionally, there was a strong association between WAI scores and supervisor support, skill discretion, occupational training, sleep quality, work nature and educational level. Conclusions. Intervention programs should focus on improving supervisor support, sleep quality, job skills and knowledge and on decreasing physical and mental work demands. Additionally, implementing a comprehensive occupational health and ergonomics program for controlling and reducing hazardous working environments and occupational injury rates should be considered.