Biomagnification of anthropogenic and naturally-produced organobrominated compounds in a marine food web from Sydney Harbour, Australia

Polybrominated diphenyl ethers (PBDEs) and naturally-produced organobrominated compounds, such as methoxylated PBDEs (MeO-PBDEs), have been scarcely studied in the Southern Hemisphere. Yet, sources of the latter group of compounds were found in Southern regions, specifically in Australia. The environmental distribution and biomagnification potential of organobrominated compounds were therefore investigated in a representative aquatic food chain (invertebrates and fish) from the Sydney Harbour, Australia. Mean PBDE concentrations ranged from 6.4 ng/g lipid weight (lw) in squid to 115 ng/g lw in flounder. BDE 47 was the dominant congener, followed by BDE 100. Mean levels of MeO-PBDEs (sum of congeners 2’-MeO-BDE 68 and 6-MeO-BDE 47) were as high as 110 ng/g lw in tailor, with a slight dominance of 2’-MeO-BDE 68. Polybrominated hexahydroxanthene derivates (PBHDs), another class of naturally-produced compounds, were found at variable concentrations and ranged from 4.7 ng/g lw in fanbelly and 146 ng/g lw in tailor. The tribrominated PBHD isomer dominated in the samples, except for luderick and squid. The lower levels of PBDEs found in luderick from the harbour compared to those obtained from the upper Parramatta River indicated a terrestrial (anthropogenic) origin of PBDEs, while the higher levels of MeO-PBDEs and PBHDs in the samples from the harbour confirmed the marine (natural) origin of these compounds. The highest trophic magnification factor (TMF) was found for sum PBDEs (3.9), while TMFs for sum MeO-PBDEs and sum PBHDs were 2.9 and 3.4, respectively. This suggests that biomagnification occurs in the studied aquatic food chain for anthropogenic brominated compounds, but also for the naturally-produced organobromines.     

Pacific Islanders’ understanding of climate change: Where do they source information and to what extent do they trust it?

Regional Environmental Change - The experience of environmental stress and attitudes towards climate change was explored for 1226 students at the University of the South Pacific, the foremost...     

Key actions towards the sustainable management of European geese

Increasing abundance of geese in North America and Europe constitutes a major conservation success, but has caused increasing conflicts with economic, health and safety interests, as well as ecosystem impacts. Potential conflict resolution through a single, ‘one size fits all’ policy is hindered by differences in species’ ecology, behaviour, abundance and population status, and in contrasting political and socio-economic environments across the flyways. Effective goose management requires coordinated application of a suite of tools from the local level to strategic flyway management actions. The European Goose Management Platform, established under the Agreement on the Conservation of African-Eurasian Migratory Waterbirds, aims to harmonise and prioritise management, monitoring and conservation efforts, sharing best practice internationally by facilitating agreed policies, coordinating flyway efforts, and sharing and exchanging experiences and information. This depends crucially upon adequate government financing, the collection of necessary monitoring data (e.g., on distribution, abundance, hunting bags, demography, ecosystem and agricultural damage), the collation and effective use of such data and information, as well as the evaluation of outcomes of existing management measures.     

Critical review of the building downwash algorithms in AERMOD

The only documentation on the building downwash algorithm in AERMOD (American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model), referred to as PRIME (Plume Rise Model Enhancements), is found in the 2000 A&WMA journal article by Schulman, Strimaitis and Scire. Recent field and wind tunnel studies have shown that AERMOD can overpredict concentrations by factors of 2 to 8 for certain building configurations. While a wind tunnel equivalent building dimension study (EBD) can be conducted to approximately correct the overprediction bias, past field and wind tunnel studies indicate that there are notable flaws in the PRIME building downwash theory. A detailed review of the theory supported by CFD (Computational Fluid Dynamics) and wind tunnel simulations of flow over simple rectangular buildings revealed the following serious theoretical flaws: enhanced turbulence in the building wake starting at the wrong longitudinal location; constant enhanced turbulence extending up to the wake height; constant initial enhanced turbulence in the building wake (does not vary with roughness or stability); discontinuities in the streamline calculations; and no method to account for streamlined or porous structures.

Implications: This paper documents theoretical and other problems in PRIME along with CFD simulations and wind tunnel observations that support these findings. Although AERMOD/PRIME may provide accurate and unbiased estimates (within a factor of 2) for some building configurations, a major review and update is needed so that accurate estimates can be obtained for other building configurations where significant overpredictions or underpredictions are common due to downwash effects. This will ensure that regulatory evaluations subject to dispersion modeling requirements can be based on an accurate model. Thus, it is imperative that the downwash theory in PRIME is corrected to improve model performance and ensure that the model better represents reality.     

Building a Sustainable Future for Animal Agriculture: An Environmental Virtue Ethic of Care Approach within the Philosophy of Technology

Agricultural technologies are non-neutral and ethical challenges are posed by these technologies themselves. The technologies we use or endorse are embedded with values and norms and reflect the shape of our moral character. They can literally make us better or worse consumers and/or people. Looking back, when the world’s developed nations welcomed and steadily embraced industrialization as the dominant paradigm for agriculture a half century or so ago, they inadvertently championed a philosophy of technology that promotes an insular human-centricism, despite its laudable intent to ensure food security and advance human flourishing. The dominant philosophy of technology has also seeded particular ethical consequences that plague the well-being of human beings, the planet, and farmed animals. After revisiting some fundamental questions regarding the complex ways in which technology as agent shapes our lives and choices and relegates food and farmed constituents into technological artifacts or commodities, I argue that we should accord an environmental virtue ethic of care—understood as caretaking—a central place in developing a more conscientious philosophy of technology that aims at sustainability, fairness, and humaneness in animal agriculture. While technology shapes society, it also is socially shaped and an environmental virtue ethic of care (EVEC) as an alternative design philosophy has the tools to help us take a much overdue inventory of ourselves and our relationships with the nonhuman world. It can help us to expose the ways in which technology hinders critical reflection of its capacity to alter communities and values, to come to terms with why we may be, in general, disengaged from critical ethical analysis of contemporary agriculture and to consider the moral shape and trajectory and the sustainability of our food production systems going into the future. I end by outlining particular virtues associated with the ethic of care discussed here and consider some likely implications for consumers and industry technocrats as they relate to farming animals.     

Phytoremediation of an arsenic-contaminated site using Pteris vittata L. and Pityrogramma calomelanos var. austroamericana: a long-term study

This field study investigated the phytoremediation potential of two arsenic (As) hyperaccumulating fern species, Pityrogramma calomelanos var. austroamericana and Pteris vittata over 27-month duration at a disused As-contaminated cattle-dip site located at Wollongbar, NSW, Australia. Ferns planted in January 2009 were harvested following 10, 22 and 27 months of growth. A detailed soil sampling was undertaken in June 2009 (initial, n?=?42 per plot) and limited sampling in April 2011 (after 27 months, n?=?15 per plot) to measure total and phosphate-extractable As concentrations in soil at 0?-?20-, 20?-?40- and 40?-?60-cm depths. The choice of the limited number of samples was considered sufficient to estimate the changes in soil As concentration following phytoremediation based on a geostatistical model. The average frond dry biomass, As concentration and As uptake were significantly (P??0.05), respectively, by P. vittata. Our results show that phytoremediation time based on observed changes in soil As based on limited sampling is not reliable; hence, it is recommended that the frond As uptake should be considered in order to evaluate the phytoremediation efficiency of the two fern species at the experimental site. Using As uptake of the two fern species, we estimate that with P. calomelanos var. austroamericana it would take 55?-?125 years to decrease mean total As content below the ecological investigation level (20 mg kg(-1)) in the surface and subsurface soils, whereas with P. vittata 143?-?412 years would be required to achieve this target.     

Factors diminishing the effectiveness of phosphorus loading from municipal effluent: critical information for TMDL analyses

Factors that diminish the effectiveness of phosphorus inputs from a municipal wastewater treatment facility (Metro) in contributing to phosphorus levels and its availability to support algae growth in a culturally eutrophic urban lake (Onondaga Lake, NY) were characterized and quantified. These factors included the bioavailability and settling characteristics of particulate phosphorus from this effluent, the dominant form (70%) of phosphorus in this input, and the plunging of the discharge to stratified layers in the lake. Supporting studies included: (1) chemical and morphometric characterization of the phosphorus-enriched particles of this effluent, compared to particle populations of the tributaries and lake, with an individual particle analysis technique; (2) conduct of algal bioavailability assays of the particulate phosphorus of the effluent; (3) conduct of multiple size class settling velocity measurements on effluent particles; and (4) determinations of the propensity of the discharge to plunge, and documentation of plunging through three-dimensional monitoring of a tracer adjoining the outfall. All of these diminishing effects were found to be operative for the Metro effluent in Onondaga Lake and will be integrated into a forthcoming phosphorus "total maximum daily load" analysis for the lake, through appropriate representation in a supporting mechanistic water quality model. The particulate phosphorus in the effluent was associated entirely with Fe-rich particles formed in the phosphorus treatment process. These particles did not contribute to concentrations in pelagic portions of the lake, due to local deposition associated with their large size. Moreover, this particulate phosphorus was found to be nearly entirely unavailable to support algae growth. While substantial differences are to be expected for various inputs, the effective loading concept and the approaches adopted here to assess the diminishing factors are broadly applicable.     

Emerging technologies for removing nonpoint phosphorus from surface water and groundwater: introduction

Coastal and freshwater eutrophication continues to accelerate at sites around the world despite intense efforts to control agricultural P loss using traditional conservation and nutrient management strategies. To achieve required reductions in nonpoint P over the next decade, new tools will be needed to address P transfers from soils and applied P sources. Innovative remediation practices are being developed to remove nonpoint P sources from surface water and groundwater using P sorbing materials (PSMs) derived from natural, synthetic, and industrial sources. A wide array of technologies has been conceived, ranging from amendments that immobilize P in soils and manures to filters that remove P from agricultural drainage waters. This collection of papers summarizes theoretical modeling, laboratory, field, and economic assessments of P removal technologies. Modeling and laboratory studies demonstrate the importance of evaluating P removal technologies under controlled conditions before field deployment, and field studies highlight several challenges to P removal that may be unanticipated in the laboratory, including limited P retention by filters during storms, as well as clogging of filters due to sedimentation. Despite the potential of P removal technologies to improve water quality, gaps in our knowledge remain, and additional studies are needed to characterize the long-term performance of these technologies, as well as to more fully understand their costs and benefits in the context of whole-farm- and watershed-scale P management.     

Using flue gas desulfurization gypsum to remove dissolved phosphorus from agricultural drainage waters

High levels of accumulated phosphorus (P) in soils of the Delmarva Peninsula are a major source of dissolved P entering drainage ditches that empty into the Chesapeake Bay. The objective of this study was to design, construct, and monitor a within-ditch filter to remove dissolved P, thereby protecting receiving waters against P losses from upstream areas. In April 2007, 110 Mg of flue gas desulfurization (FGD) gypsum, a low-cost coal combustion product, was used as the reactive ingredient in a ditch filter. The ditch filter was monitored from 2007 to 2010, during which time 29 storm-induced flow events were characterized. For storm-induced flow, the event mean concentration efficiency for total dissolved P (TDP) removal for water passing through the gypsum bed was 73 ± 27% confidence interval (α = 0.05). The removal efficiency for storm-induced flow by the summation of load method was 65 ± 27% confidence interval (α = 0.05). Although chemically effective, the maximum observed hydraulic conductivity of FGD gypsum was 4 L s(-1), but it decreased over time to <1 L s(-1). When bypass flow and base flow were taken into consideration, the ditch filter removed approximately 22% of the TDP load over the 3.6-yr monitoring period. Due to maintenance and clean-out requirements, we conclude that ditch filtration using FGD gypsum is not practical at a farm scale. However, we propose an alternate design consisting of FGD gypsum-filled trenches parallel to the ditch to intercept and treat groundwater before it enters the ditch.