Growth and physiological response of spinach to various lithium concentrations in soil

Environmental Science and Pollution Research - Lithium (Li) exploitation for industrial and domestic use is resulting in a buildup of the element in various environmental components that results in...     

Statistical source identification of metals in groundwater exposed to industrial contamination

Levels of selected metals Na, Ca, Mg, K, Fe, Mn, Cr, Co, Ni, Cd, Pb and Mn were estimated by flame atomic absorption spectrophotometry in groundwater samples from Kasur, a significant industrial city of Pakistan. Salient mean concentration levels were recorded for: Na (211 mg/l), Ca (187 mg/l), Mg (122 mg/l), K (87.7 mg/l), Fe (2.57 mg/l) and Cr (2.12 mg/l). Overall, the decreasing metal concentration order was: Na > Ca > Mg > K > Fe > Cr > Zn > Co > Pb > Mn > Ni > Cd. Significantly positive correlations were found between Na–Cr (r = 0.553), Na–Mn (r = 0.543), Mg–Fe (r = 0.519), Mg–Cr (r = 0.535), Pb–K (r = 0.506) and Pb–Ni (r = 0.611). Principal Component Analysis and Cluster Analysis identified tannery effluents as the main source of metal contamination of the groundwater. The present metal data showed that Cr, Pb and Fe levels were several times higher than those recommended for water quality by WHO, US-EPA, EU and Japan. The elevated levels of Cr, recorded as 21–42 fold higher compared with the recommended quality values, were believed to originate from the tanning industry of Kasur.     

Comparative distribution of the scalp hair trace metal contents in the benign tumour patients and normal donors

The scalp hair samples of benign tumour patients (n = 77) and normal donors (n = 86) were analysed for selected trace metal contents using atomic absorption spectrophotometry. In the scalp hair of benign tumour patients, highest average levels were found for Ca (1,401 microg/g), followed by Na (476.9 microg/g), Mg (441.6 microg/g), Zn (438.3 microg/g), K (119.2 microg/g) and Fe (96.38 microg/g) while in comparison, the maximum mean levels in the scalp hair of normal donors were shown by Ca (556.5 microg/g), followed by Zn (154.2 microg/g), Mg (153.4 microg/g), Na (97.45 microg/g) and Fe (81.68 microg/g). Almost all metal levels revealed higher dispersion and asymmetry in the scalp hair of benign tumour patients compared with the normal donors. The average concentrations of Ca, Cd, Co, K, Mg, Mn, Na, Ni, Pb, Sb, Sr and Zn were significantly higher in the hair of benign tumour patients compared with the normal donors. Significant gender-based differences were also observed in the scalp hair metal contents of benign tumour patients. Strong positive correlations were found between Cd-Cr (0.547) and Cd-Co (0.507) in the hair of benign tumour patients whereas Ca-Mg, Mg-Sr, Co-Cd, Cr-Cd, Li-Cr, Li-Co, Li-Cd, Na-Cd, Na-Co and Na-Li exhibited strong relationships (r > 0.50) in the hair of normal donors. Cluster analysis (CA) and principal component analysis (PCA) were used for the source identification and apportionment of scalp hair trace metals in the two donor groups. The scalp hair of benign tumour patients and normal donors revealed six and five main clusters of trace metals, respectively. PCA extracted seven principal components of trace metals in the scalp hair of benign tumour patients while six principal components were observed in the case of normal donors. The study evidenced significantly different patterns of metal distribution in the hair of benign tumour patients in comparison with normal donors.     

Environmental factors affecting the frequency of road traffic accidents: a case study of sub-urban area of Pakistan

Road traffic accidents (RTAs) are among the life-threatening issues facing rural as well as sub-/urban communities. Several factors contribute to RTAs ranging from human to technical and natural/environmental impacts. Anthropogenic air pollution and corresponding environmental factors also increase the probability of RTAs. Current study reports the relationship of the weather conditions to RTAs. The study establishes the relevancy of different weather conditions like rainfall, temperature, fog, and wind storm with the incidences of RTAs in rural and urban settings of Vehari, Punjab—Pakistan. The results of the study showed that rainfall, severe coldness, fog, and heat conditions were directly related with the occurrence of RTAs. The percentage of RTAs which occurred due to fog, rainfall, temperature, and other weather-related factors was 34, 25, 21, and 20%, respectively. The age of the driver significantly correlated (R²?=?0.60) with RTAs; the drivers in the age group 40–60 years caused the least RTAs during their drive. Since the smaller vehicles were involved in maximum RTAs, it relates negatively (R²?=?0.82) to vehicles power. Among different vehicles motor bikes were involved in most (42%) of the reported RTAs. Therefore, during severe weather conditions, vehicles with smaller size and young drivers must be dealt with carefully while interacting (crossing, overtaking, and maneuvering) on the roads regardless of rural or urban conditions. Factors including civic sense, traffic education, vehicle size, drivers’ maturity, road conditions, and environmental impacts may be considered while designing traffic rules and traffic aware campaigns specific for developing countries such as Pakistan.

     

Hydrous ferric oxide nanoparticles hosted porous polyethersulfone adsorptive membrane: chromium (VI) adsorptive studies and its applicability for water/wastewater treatment

In this present study, adsorptive membranes for Cr(VI) ion removal were prepared by blending polyethersulfone (PES) with hydrous ferric oxide (HFO) nanoparticles (NPs). The effects of HFO NPs to PES weight ratio (0–1.5) on the physicochemical properties of the resultant HFO/PES adsorptive membranes were investigated with respect to the surface chemistry and roughness as well as structural morphologies using different analytical instruments. The adsorptive performance of the HFO NPs/PES membranes was studied via batch adsorption experiments under various conditions by varying solution pH, initial concentration of Cr(VI), and contact time. The results showed that the membrane made of HFO/PES at a weight ratio of 1.0 exhibited the highest adsorption capacity which is 13.5 mg/g. Isotherm and kinetic studies revealed that the mechanism is best fitted to the Langmuir model and pseudo-second-order model. For filtration of Cr(VI), the best promising membranes showed improved water flux (629.3 L/m² h) with Cr(VI) ion removal of 75%. More importantly, the newly developed membrane maintained the Cr(VI) concentration below the maximum contamination level (MCL) for up to 9 h.

     

Floristic composition of arid off –shore islands in Abu Dhabi,United Arab Emirates

Data on flora and vegetation of 14 off-shore islands representing different habitat types were studied for investigating floristic composition, vegetation types and correlation with their habitats and ecosystem. The results demonstrate considerable plant distribution and diversity among the islands within the limited spectrum of species; encompassing a total of 47 species, belonging to 43 genera under 24 families. The most representative families were Amaranthaceae (9 species), Fabaceae (4 species), Poaceae (4 species) and Asteraceae and Aizoaceae (3 species each). Fourteen families are represented by only one species. The mangrove species, Avicennia marina, occurs throughout the coast of Abu Dhabi in discontinuous patches and in different water salinities. The studies also seek to underline that dominant species that constitutes the flora of Abu Dhabi are salt tolerant in nature. Compared to other Arabian Peninsula ecosystems, UAE perhaps has a higher coastal: mainland area ratio, which has contributed to a natural dominance of salt tolerant species among the community. The studies show 40% similarity among islands with respect to the species diversity. The floristic composition of the off-shore islands also indicates a need to consider these sites as protected sites.     

Quality of tube well water intended for irrigation and human consumption with special emphasis on arsenic contamination at the area of Punjab,Pakistan

In the present study, the tube well water quality and the associated health risks, emphasizing on arsenic contamination, were investigated in rural and urban samples from Tehsil Mailsi located in Punjab, Pakistan. Arsenic concentrations (μg/L) were ranged from 12 to 448.5 and which exceeded the WHO recommended limit (10 μg/L) in all cases. The calculated average daily dose (3.3 × 10^?0.4 to 1.2 × 10^?0.2 mg/kg day) and hazard quotient (1.1–40) reflected the potential health risk to local population due to tube well water consumption as drinking purpose. Sodium percent (Na%), sodium absorption ratio, residual sodium carbonate, Kelly’s index and magnesium absorption ratio were also determined to assess the suitability of tube well water for irrigation purpose. The resulting piper plot revealed the Na–Ca–HCO₃ type water chemistry of the area and generally alkaline environment. The spatial distribution of arsenic in the tube well waters pinpoints the significant contribution of anthropogenic activities to arsenic pollution. Nevertheless, different statistical tools, including principal component analysis, hierarchical cluster analysis and correlation matrices, revealed the contribution of both natural and anthropogenic activities and alkaline type of aquifers toward the high level of arsenic contamination.