航站楼旅客群体性事件预警监控系统架构及关键技术

针对航站楼旅客群体性事件的智能化预警问题,在民用机场航站楼内的现有视频监控系统的基础上,提出旅客群体性事件预警监控系统架构和关键技术。针对航站楼内的视频监控系统的视频数据进行预处理;基于空间聚类算法,从图像中提取人群聚集特征;针对目标监控区域的历史视频和突发事件数据进行统计分析,研究正常和非正常两种情况下的人群分布特征,并建立相应的预警规则库;根据预警规则,在人群聚集特征识别的基础上,对非正常目标密集人群进行识别。该系统可根据航站楼旅客群集性事件的时空特性,针对不同事件、不同时间、不同地点采用不同的规则进行预警,提高了预警的可靠性。     

Enhanced activation of peroxymonosulfate by CNT-TiO2 under UV-light assistance for efficient degradation of organic pollutants

CNT-TiO₂ composite is used to activate PMS under UV-light assistance. Superior performance is due to the enhanced electron-transfer ability of CNT. SO₄•⁻, •OH and ¹O₂ play key roles in the degradation of organic pollutants. In this work, a UV-light assisted peroxymonosulfate (PMS) activation system was constructed with the composite catalyst of multi-walled carbon nanotubes (CNT) - titanium dioxide (TiO₂). Under the UV light irradiation, the photoinduced electrons generated from TiO₂ could be continuously transferred to CNT for the activation of PMS to improve the catalytic performance of organic pollutant degradation. Meanwhile, the separation of photoinduced electron-hole pairs could enhance the photocatalysis efficiency. The electron spin resonance spectroscopy (EPR) and quenching experiments confirmed the generation of sulfate radical (SO₄•⁻), hydroxyl radical (•OH) and singlet oxygen (¹O₂) in the UV/PMS/20%CNT-TiO₂ system. Almost 100% phenol degradation was observed within 20 min UV-light irradiation. The kinetic reaction rate constant of the UV/PMS/20%CNT-TiO₂ system (0.18 min⁻¹) was 23.7 times higher than that of the PMS/Co₃O₄ system (0.0076 min⁻¹). This higher catalytic performance was ascribed to the introduction of photoinduced electrons, which could enhance the activation of PMS by the transfer of electrons in the UV/PMS/CNT-TiO₂ system.     

Comparison of CNT-PVA membrane and commercial polymeric membranes in treatment of emulsified oily wastewater

CNT-PVA membrane was fabricated and compared with polymeric membranes. The separation performance was evaluated by homemade and cutting fluid emulsions. The three membranes show similar oil retention rates. CNT-PVA membranes have higher permeation fluxes compared with polymeric membranes. CNT-PVA membrane shows higher fouling resistance. Membrane separation is an attractive technique for removal of emulsified oily wastewater. However, polymeric membranes which dominate the current market usually suffer from severe membrane fouling. Therefore, membranes with high fouling resistance are imperative to treat emulsified oily wastewater. In this study, carbon nanotube-polyvinyl alcohol (CNT-PVA) membrane was fabricated. And its separation performance for emulsified oily wastewater was compared with two commercial polymeric membranes (PVDF membrane and PES membrane) by filtration of two homemade emulsions and one cutting fluid emulsion. The results show that these membranes have similar oil retention efficiencies for the three emulsions. Whereas, the permeation flux of CNT-PVA membrane is 1.60 to 3.09 times of PVDF membrane and 1.41 to 11.4 times of PES membrane, respectively. Moreover, after five consecutive operation circles of filtration process and back flush, CNT-PVA membrane can recover 62.3% to 72.9% of its initial pure water flux. However, the pure water flux recovery rates are only 24.1% to 35.3% for PVDF membrane and 6.0% to 26.3% for PES membrane, respectively. Therefore, CNT-PVA membrane are more resistant to oil fouling compared with the two polymeric membranes, showing superior potential in treatment of emulsified oily wastewater.     

Carbon nanotubes-incorporated MIL-88B-Fe as highly efficient Fenton-like catalyst for degradation of organic pollutants

CNTs were incorporated into MIL-88B-Fe to get a new Fenton-like catalyst (C@M). Fe(II) was introduced in C@M to get a fast initiation of Fenton-like reaction. Fe(II) content in C@M was related with oxygen-containing functional groups on CNTs. C@M shows efficient catalytic degradation of pollutants over a wide pH range. Iron-based metal organic frameworks have been verified to be efficient heterogeneous Fenton catalysts due to their open pore channels and highly uniform distribution of metallic centers. In these catalysts, however, the iron element is mainly in the form of Fe(III), which results in a process required to reduce Fe(III) to Fe(II) to initiate Fenton reaction. To address this problem, carbon nanotubes (CNTs) with electron-rich oxygen-functional groups on the surface were incorporated into the metal organic frameworks (MIL-88B-Fe) to improve Fe(II) content for an enhanced Fenton-like performance. The prepared CNT@MIL-88B-Fe (C@M) showed much stronger catalytic ability toward H₂O₂ than MIL-88B-Fe. The pseudo-first-order kinetic constant for phenol degradation by C@M (0.32 min^–1) was about 7 times that of MIL-88B-Fe, and even higher than or comparable to the values of reported heterogeneous Fenton-like catalysts. Moreover, the Fenton-like system could effectively degrade various kinds of refractory organic pollutants and exhibited excellent catalytic activity over a wide pH range (4–9). XPS analysis confirmed that Fe(II) content of the catalyst gradually increased with CNT loadings. Electron spin resonance analysis showed that the signal intensity (•OH) of C@M was much higher than MIL-88B-Fe, which was consistent with the degradation efficiency of pollutants. Furthermore, the Fe(II) content of the catalyst gradually increased along with the oxygen-functional group content of CNTs. The result demonstrated that oxygen-containing functional groups of CNTs have a significant impact on the enhanced catalytic performance of C@M. This study provides a new insight to enhance Fenton reaction by using nanocarbon materials.     

Distribution Characteristics and Implication of n-alkanes in Soils and Plants in Alpine Meadow

Russian Journal of Ecology - The present study was conducted to investigate the n-alkane composition of typical alpine meadows. Plant and soil samples were collected and analyzed to characterize...     

出口欧盟家用烹饪电炉灶的性能法规及测试标准研究

本文对出口欧盟家用烹饪电炉灶的性能法规及测试标准进行了研究,并与国内现行标准进行了对比分析。欧盟发布的No 66/2014法规对家用烹饪电炉灶的能耗限值作出强制性要求。IEC 60350-2提供了该类产品性能测试的指导方法。深入了解相关的法规条例和标准内容,可以帮助中国企业更好的"走出去"。     

Changes in the heavy metals and petroleum hydrocarbon contents in seawater and surface sediment in the year following artificial reef construction in the Pearl River Estuary,China

Environmental Science and Pollution Research - Marine pollution is an important driver of ocean biodiversity loss, which can be mitigated by the construction of artificial reefs (ARs). Many studies...     

基于AHP-联系熵的应急预案实施过程风险评估

应急预案制定后的实施对于事故发生后预案的顺利运行至关重要，因此，有必要对应急预案实施过程的风险水平进行度量。以应急预案实施过程作为研究对象，基于风险理论与AHP-联系熵耦合方法开展风险评估。以应急预案实施过程风险水平为目标层，应急预案的宣传教育和培训、应急资源的定期检查落实、应急演习训练、应急预案的实用性检验、应急预案电子化、事故回顾等过程要素作为策略层，实施方法科学高效、调动工作者积极的态度、领导的重视和能力、设备的完整性作为方案层，形成应急预案实施过程风险评估三级模型；运用联系熵表征风险标准与应急预案实施过程风险水平这2个集对之间的关联性，在AHP结构模型和权重分配的基础上计算加权熵并得到目标层的总联系熵，对比标准熵区间得到应急预案实施过程的整体风险等级。结果表明，采用AHP-联系熵度量方法提高了评价结果的结构性和准确性，比传统直接加权的方法更符合实际情况。     

城市生活垃圾处理方式生命周期评价的比较研究

生命周期评价理论与方法作为一种量化环境影响的工具,在诸多领域中得到了广泛的应用。在垃圾处理领域,生命周期评价最早在20世纪90年代得到应用。生命周期评价与城市生活垃圾处理的有效结合,将促进城市生活垃圾的减量化、资源化、无害化目标的实现。总结了生命周期评价理论与方法在城市生活垃圾处理中的应用现状。对国内不同城市生活垃圾处理方式环境影响因子进行比较分析,诸如全球变暖潜力、酸化潜力和富营养化潜力等因子。针对其目标范围定义、数据收集、评价方法的选择、结果解释及工艺改进等方面指出了目前研究的局限性和不足。并对未来城市生活垃圾处理生命周期评价的发展方向进行展望。     

基于VR技术的机场应急救援虚拟演练平台

为解决机场实地应急演练中存在的成本消耗高、不安全、扩展性差等问题，研发基于VR技术的机场应急救援虚拟演练平台。平台采用模块化设计方案，并通过定义平台操作流程支持虚拟演练操作。采取分细节度的场景构建方法，运用细节层次模型以3层不同细节度模型方案将虚拟灾害场景划分为3类，同时利用Unity3D粒子系统控制机制实现火灾及灭火粒子特效的模拟，运用双顶层本体模型构建机场应急预案本体模型（AERPO），并利用XML Spy建立存储模型，且支持基于典型场景模型编辑形成整个灾害场景。结果表明:平台模块设置科学、场景效果合理，有助于提升演练人员应急处置能力。