Synthesis of TiO2 nanoparticles in different thermal conditions and modeling its photocatalytic activity with artificial neural network

Titanium dioxide (TiO₂) nanoparticles were prepared by sol gel route. The preparation parameters were optimized in the removal of 4-nitrophenol (4-NP). All catalysts were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). An artificial neural network model (ANN) was developed to predict the photocatalytic removal of 4-NP in the presence of TiO₂ nanoparticles prepared under desired conditions. The comparison between the predicted results by designed ANN model and the experimental data proved that modeling of the removal process of 4-NP using artificial neural network was a precise method to predict the extent of 4-NP removal under different conditions.     

Aminobenzenesulfonamide functionalized SBA-15 nanoporous molecular sieve: A new and promising adsorbent for preconcentration of lead and copper ions

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺ and Cu²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with aminobenzenesulfonamide groups and flame atomic absorption spectrometry (FAAS) is presented. Aminobenzenesulfonamide functionalized SBA-15 was synthesized according to procedure in the literature and the presence of organic groups in the silica framework was demonstrated by FT-IR spectra. The functionalized product showed the BET surface area 110 m²/g and pore diameter 5.1 nm, based on adsorption-desorption of N₂ at 77 K. The effect of several variables such as (amount of adsorbent, stirring time, pH and presence of other ions in the medium) has been studied. Lead and copper were completely extracted at pH greater than 3 after stirring for 10 min. The maximum capacity of the adsorbent was found to be 191.3 ± 1.4 and 155.0 ± 1.0 μg of lead and copper ions/mg functionalized SBA-15, respectively. The preconcentration factor of the method was found to be 200. The detection limit of the technique was 3.4 and 0.4 ng/mL for Pb²⁺ and Cu²⁺, respectively. The applications of this methodology for real samples were examined by various water type, black tea and pepper samples.     

Acute and chronic toxicity of nickel to nitrifiers at different temperatures

This study investigated the acute nickel toxicity on nitrification of low ammonia synthetic wastewater at 10, 23, and 35°C. The nickel inhibition half-velocity constants(K_(I,Ni)) for ammonia oxidizing bacteria(AOB) and nitrite oxidizing bacteria(NOB) based on Ni/MLSS ratio at 10, 23, and 35°C were 5.4 and 5.6 mg Ni/g MLSS, 4.6 and 3.5 mg Ni/g MLSS, and 9.1 and 2.7 mg Ni/g MLSS, respectively. In addition, chronic toxicity of nickel to nitrification of low ammonia synthetic wastewater was investigated at 10°C in two sequencing batch reactors(SBRs). Long-term SBRs operation and short-term batch tests were comparable with respect to the extent of inhibition and corresponding Ni/MLSS ratio. The μ_(max), b, and K_o of AOB were 0.16 day~(-1), 0.098 day~(-1) and 2.08 mg O_2/L after long-term acclimatization to nickel of 1 mg/L at 10°C, high dissolved oxygen(DO)(7 mg/L) and long solids retention time(SRT) of 63–70 days. Acute nickel toxicity of nitrifying bacteria was completely reversible.     

Book reviews

Planning in the Public Domain: From Knowledge to Action

John Friedmann. Princeton University Press, 1987, 501pp.

New Communities for Urban Squatters: Lessons from the Plan that Failed in Dhaka, Bangladesh

Charles L. Choguill, Plenum Press, New York 1987, pp. 213.

Models of Urban and Regional Systems in Developing Countries

George Chadwick, Oxford, Pergamon Press, 1987, xv +320pp.

Price: £17.50.     

Epidemiology of occupational accidents among Iranian insured workers

Work-related accidents are considered as a major health problem worldwide. The aim of present study was to determine the epidemiological pattern of occupational accidents among workers insured by the Iranian Social Security Organization (ISSO) between 2001 and 2005.Subjects consisted of all workers and drivers who had a work-related accident during 2001–2005 and were registered in the Iranian Social Security Organization (ISSO) database according to the inspection reports. An ordinal logistic regression model (proportional odds regression model) was used to assess the concurrent effects of independent variables on accident outcomes.Overall, 86,437 work-related accidents were investigated. The accidents were more frequent in metal workplaces and electrical industries, respectively. More than half of the accidents were due to incautious activities. Workers’ age (age at the time of accident) (OR = 0.99, CI: 0.989–0.994), gender (OR = 1.3, CI: 1.191–1.683), marital status (OR = 1.25, CI: 1.143–1.675) as well as accident setting (OR = 1.88, CI: 1.728–1.975) had significant effect on accident outcomes. Pattern of occupational injuries in Iran was consistent with the global pattern for accident outcomes.     

Decolorization and degradation of acid dye with immobilized titania nanoparticles

This paper addresses the decolorization and degradation of acid dye by a heterogeneous photocatalytic process using immobilized nano-sized TiO₂ particles as the photocatalyst. Sackcloth fiber was used as a support to immobilize the nano-sized TiO₂ photocatalyst. The structural properties of the immobilized photocatalyst were characterized by XRD, SEM and EDX. UV–Vis absorption spectroscopy and the measurement of the chemical oxygen demand (COD) were also used for the process performance studies. The XRD results did not show significant changes in the structure of P25 as a consequence of the immobilization procedure. The formation of titania crystallites in the sackcloth fiber was confirmed by SEM/EDX. The photocatalytic activities of TiO₂-coated sackcloth fiber catalyst were evaluated using Acid Black 26 as a model organic contaminant and using UV-A radiation. Experimental results showed that after 60 min, the degradation of Acid Black 26 with the immobilized TiO₂ particles was higher than that with plain TiO₂. Based on the COD results, after 3 h, the TiO₂-coated sackcloth fiber effectively decomposed all of the organic compounds present in dye solution under the studied experimental conditions. The effects of the oxidant H₂O₂, initial dye concentration and pH on the photocatalytic degradation were also investigated. The presence of CO₃^2? as a dissolved inorganic anion had the highest inhibitory effect on the decolorization of the dye, when compared with the other anions investigated. Kinetics analysis indicates that the photocatalytic decolorization rate of Acid Black 26 can be described by a pseudo-first-order model.     

Investigation of the association between pesticide exposure and the prevalence of type 2 diabetes in Shahedieh population in Yazd

Environmental Science and Pollution Research - This study aimed to investigate the effect of exposure to pesticides and the prevalence of type 2 diabetes (T2D). In a cross-sectional study with a...     

Daily dietary intakes of zinc,copper, lead,and cadmium as determined by duplicate portion sampling combined with either instrumental analysis or the use of food composition tables,Shiraz, Iran

Estimation of essential and toxic element intakes is crucial to evaluate the risks of deficiency or toxicity. The purpose of this study was to investigate and also to compare the dietary intakes of zinc (Zn) and copper (Cu) by adults living in Shiraz, Iran, determined by two procedures: duplicate portion sampling of 21 hospital meals combined with either instrumental analysis (voltammetric measurement) or the use of food composition tables (FCTs). The level of exposure to lead (Pb) and cadmium (Cd) was evaluated as well. The daily Zn intakes of both methods were not significantly different and were higher than the RDA values except the value measured by the instrumental analysis which was lower than the RDA established for a male adult. Daily intake of Cu determined by instrumental analysis was significantly lower and closer to RDA for adults compared with the value estimated by FCTs. The dietary intakes of Pb and Cd were 313 and 61 % of the respective provisional tolerable weekly intakes (PTWIs), respectively. The accuracy of two methods used for estimation of Zn intake was similar. In the case of Cu, the use of FCTs, in which the influence of environmental conditions and dietary habits of meal preparation is not taken into account, overestimated dietary intake. The risk of zinc deficiency was found in adult males. Moreover, the estimated intake of Pb, but not Cd, could be a cause of concern for Shiraz population. Thus, conducting regular periodic studies to assess the dietary intake of mentioned elements are recommended.     

Health risk assessment of potentially toxic elements intake via food crops consumption: Monte Carlo simulation-based probabilistic and heavy metal pollution index

Environmental Science and Pollution Research - The aim of this study is to assess the content of heavy metals and their potential health risk in consumed food crops. To this end, the samples from...     

Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.