Investigation of saponification for determination of polychlorinated biphenyls in marine sediments

The effects of saponification conditions (temperature and water content of saponifying solution) on the determination of chlorinated biphenyls (CBs) in marine sediments were investigated. Although highly chlorinated biphenyls (nona- to deca-CBs) decomposed during high-temperature saponification, the degree of degradation was reduced by adding water to the ethanolic potassium hydroxide saponifying solution. Room-temperature saponification yielded quantitative recovery of highly chlorinated biphenyl surrogates but low extraction efficiencies of lightly chlorinated biphenyls (mono- to di-CBs). The same samples were analyzed by other extraction techniques, for example, pressurized liquid extraction, and analytical results were compared. The mono- and di-CB concentrations were correlated with the extraction temperatures of various extraction techniques. In particular, the concentrations of some CB congeners (CB11, CB14) were higher with saponification. The low degree of degradation of highly chlorinated biphenyls and the high recovery of lightly chlorinated biphenyls were compatible when room-temperature and high-temperature saponification were combined. Except for the anomalies of CB11 and CB14, the combined method gave satisfactory results for analysis of PCBs.     

Systematic analysis and overall toxicity evaluation of dioxins and hexachlorobenzene in human milk

A systematic method for analyzing dioxins (PCDDs, PCDFs and dioxin-like PCBs), hexachlorobenzene (HCB), heptachlor epoxide and beta-hexachlorocyclohexane (HCH) in human milk was developed to determine the residual amount of HCB in human milk and to evaluate the overall toxicity of both dioxins and HCB in human milk. The fractionation behavior of HCB on chromatography with silica gel, alumina, and activated carbon/silica gel, and the concentrated sulfuric acid decomposition method, which is widely used as a dioxin cleanup method, were studied in order to make the preprocessing operation for HCB measurement compatible with that for conventional dioxin measurement. HCB was found to be eluted in the 2% dichloromethane (DCM)/hexane 60 ml fraction from an alumina column. Heptachlor epoxide and a part of beta-HCH were eluted in the 10% DCM/hexane 50 ml fraction from a silica gel column, while the remaining beta-HCH was eluted in the 25% DCM/hexane 60 ml fraction from an activated carbon/silica gel column. Moreover, HCB showed significant correlation with dioxin congeners having high toxicity equivalence factors (TEFs). The results suggest that the exposure route to HCB and its accumulation behavior in the human body are similar to those of the dioxins.     

Self-catalytic degradation of ortho-chlorophenol with Fenton's reagent studied by chemiluminescence

The degradation of ortho-chlorophenol using Fenton's reagent was studied by chemiluminescence (CL). Without a special CL reagent, a weak CL emission from the mixture of ferrous ion and hydrogen peroxide was observed at room temperature. The CL intensity was increased by the addition of ortho-chlorophenol into the mixed solution. When the temperature was raised to 65℃, the CL intensity was enhanced strongly. The CL mechanisms for the system H₂O₂-Fe²⁺ with and without ortho-chlorophenol were studied by examining the CL spectrum, gas chromatography-mass spectrometry and electron spin resonance spectrum. The effects of various free radical scavengers, surfactants and fluorescence compounds on the CL intensity were also investigated. A self-catalytic oxidation mechanism was proposed. The results showed that singlet oxygen was the main emitter for the system H₂O₂-Fe²⁺. The strong CL from the system H₂O₂-Fe²⁺-ortho-chlorophenol was due to singlet oxygen and electronically excited quinone. The benzenediol-like intermediate product formed during the phenol oxidation process greatly promoted the Fenton's reaction and led to higher CL intensity. Chemiluninescence is a novel approach for the investigation of the oxidation of some organic pollutants by Fenton's reagent.     

Regional and seasonal characteristics of emission sources of fine airborne particulate matter collected in the center and suburbs of Tokyo, Japan as determined by multielement analysis and source receptor models

Airborne particulate matter, suspected to induce adverse effects on human health, have been one of the most important concerns regarding recent air pollution issues in Japan. To characterize regional and seasonal variations in emission sources of fine airborne particulate matter (d < 2 microm), monthly samples (n = 36 for each site) were collected at urban (Tokyo), suburban (Maebashi), and mountainous (Akagi) sites in Japan from April 2003 to March 2006. Multielement analysis of chemical species (Na, Al, K, Ca, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Sb, and Pb) was performed by inductively coupled plasma-atomic emission spectrometry and inductively coupled plasma-mass spectrometry. The combined source receptor model, which consists of positive matrix factorization and chemical mass balance, determined the contributions of nine emission sources (local and continental soils, road dust, coal and oil combustion, waste incineration, steel industry, brake wear, and diesel exhaust) to the observed elemental concentrations. Large regional differences were identified in the source contributions among the observational sites. Diesel exhaust was identified as the most significant source (70% of identified contributions) at the urban site. Local and continental soils, coal combustion, and diesel exhaust were intricately assigned (20-30% each) to the suburban site. Continental soil was the predominant source (65%) at the mountainous site. Respective significant source contributions dominated the seasonal variations of total elemental concentrations at each site. These results suggest that a better understanding of the regional and seasonal characteristics of impacting emission sources will be important for improving regional environments.     

Effects of process conditions on nano-dot array formation by thermal dewetting

In this paper, three kinds of self-organization processes for metal nano-dot array fabrication are compared; one is the conventional thermal dewetting, another is thermal dewetting of a grid patterned deposited metal layer, the other is thermal dewetting of a metal layer deposited on a patterned substrate. In these processes, nano plastic forming technique is utilized for patterning of groove grid. Effects of process conditions on nano-dot formation, such as substrate material, deposited metal, thickness of deposited layer, annealing condition, are experimentally studied. Also, effect of grid patterning on improvement of nano-dot array formation is studied. It is shown that grid patterning on a deposited metal layer is effective to improve alignment and configuration of nano-dot array.     

Development of dioxin toxicity evaluation method in human milk by enzyme-linked immunosorbent assay--assay validation for human milk

In this study, the development of a toxicity evaluation method for dioxins in human milk by enzyme-linked immunosorbent assay (ELISA) was reported. A total of 17 human milk samples were tested by ELISA and by gas chromatography/mass spectrometry (GC/MS) to assess whether the ELISA performed on samples obtained from primiparas could be considered as reliable enough for identifying a dioxins contamination in human milk. The concept of toxicity equivalent quantity (TEQ) screening was validated by comparing TEQ values for a set of human milk samples to the ELISA responses predicted for those samples. A fairly good correlation (r=0.920) between immunoassay and GC/MS was achieved for human milk. This ELISA should be useful for biological samples monitoring.     

Antheridium development of Sargassum fulvellum and S. kjellmanianum

The antheridium development of Sargassum fulvellum Ag. and S. kjellmanianum Yendo was investigated. The characteristics of meiosis were observed at the first division of the antheridium in both species. The chromosome number observed was 32 in both species. Six divisions were observed during the development of the antheridium, and the first two divisions were meiotic. 64 nuclei were formed in each antheridium, and cytoplasmic cleavage occurred after the final division. The manner of antheridium development in both species is similar to that already reported from Japan for 7 species of the genus Sargassum.     

Detonation characteristics of ammonium nitrate and activated carbon mixtures

To better understand the detonation characteristics of ammonium nitrate (AN) and activated carbon (AC) mixtures, steel tube tests were carried out for AN/AC mixtures of various compositions and different forms of AN (powdered, prilled, phase stabilized and granular), and the detonation velocity was measured. The powdered AN/AC mixtures gave higher detonation velocities than the other AN forms. For all the AN/AC mixtures, the experimentally observed detonation velocities at each loading density were far below the theoretically predicted values calculated by the CHEETAH code based on thermohydrodynamics, exhibiting so-called non-ideal detonation. The lowest detonation velocity of powdered AN/AC mixtures was obtained as D=1.25 km/s for an AC content of 0.1 wt%. This was considered to be close to the critical condition for stable detonation.