单一震源地震发生的等效物理模型

建立了模拟单一潜在震源区地震孕育和发生的等效物理模型，给出了通过调整各次地震之间断层位移速率来拟合已有地震序列的方法。通过考虑模型参数的不确定性，提出了在未来一定年限内潜在震源区发生震级在不同震级段的概率预报方法。通过两种等效物理模型的对比，本文认为就工程地震危险性评定而言，可用简单的滑块－弹簧模型代替滑块－弹粘塑性模型     

高原铁路机车乘务人员生理选拔指标研究

为了研究高原铁路机车乘务员生理选拔指标,确定生理指标鉴定标准值,选择西宁铁路分局西格段机车司机500人进行指标体系鉴定试验。其结果表明:西格段机车司机总体合格率为31.6%,年龄、行车线路高度差对合格率有较大影响;确认红细胞压积、白细胞计数、血小板计数、血氧饱和度、血糖、谷草转氨酶、总胆红素、直接胆红素、尿蛋白和尿红细胞为较敏感的高原低氧生理代偿指标;可作为生理适应性筛检指标。提出选拔青藏铁路机车乘务员应采用基础体检、高原适应性体检二级结构模型;制定了高原机车乘务员体检鉴定医学标准、测试方法、合格判定标准。     

川南山地林分变化对土壤物理性质和抗蚀性的影响

以川南天然林(TRL)及其转变成的毛竹林(MZL)、檫木林(CML)、柳杉林(LSL)、杉木林(SML)和水杉林(SSL)为对象,研究不同林分土壤物理性质和抗蚀性差异,以主成分分析法(ZCFM)和隶属函数法(LSHM)分别计算的土壤抗蚀性综合值Ⅰ(KSX-Ⅰ)和Ⅱ(KSX-Ⅱ)评价林分变化对土壤抗蚀性的影响,探索简便易行的土壤抗蚀性综合评价方法。结果表明,天然林转变为人工林后土壤物理性质和抗蚀性变差,呈现出有机质和0.25 mm水稳性团聚体含量、水稳性团聚体平均重量直径、团聚度、孔隙度及物理稳定性指数降低,而结构体破坏率、不稳定团粒指数、容重、分散率及侵蚀系数增加。各林分土壤KSX-Ⅰ和KSX-Ⅱ均呈现出TRLCMLSSLLSLMZLSML的规律变化。土壤抗蚀性指标间相关性均达到显著(p0.05)水平;土壤KSX-Ⅰ和KSX-Ⅱ之间呈显著相关关系(p0.05),且两者均与各抗蚀性指标间呈显著相关(p0.05)。说明天然林植被变化后会使土壤抗蚀性降低,影响原有植被水土保持功能,应该加强天然林及其生态功能保护;ZCFM和LSHM均可作为计算土壤抗蚀性综合值的有效方法,但考虑到计算过程的难易度,后者更简便易行。结果为土壤抗蚀性综合评价新方法的建立提供了参考。     

鼠李糖脂洗脱氯丹和灭蚁灵污染场地土壤的工艺参数

优化了鼠李糖脂洗脱氯丹、灭蚁灵污染土壤的工艺条件,为开展有机氯农药污染场地土壤洗脱修复工程实践提供科学依据和技术参数。实验结果表明,随着洗脱剂———鼠李糖脂浓度的增加,氯丹和灭蚁灵的洗脱量呈现先增加后降低的趋势;洗脱时间和液固比对洗脱效果的影响趋势与浓度相同;在0~120 r/min范围内,氯丹和灭蚁灵洗脱量随着搅拌速度的增加而增大,80、120和200 r/min的洗脱量间差异不显著;单次洗脱量随洗脱次数的增加而降低,累计洗脱量则逐渐增大。综上所述,氯丹、灭蚁灵污染场地土壤鼠李糖脂洗脱的适宜工艺参数为鼠李糖浓度10 mmol/L,搅拌速度80 r/min,固液比1∶10,洗脱时间20 min,洗脱3次。     

The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.     

2013年春夏季莱州湾海水环境要素特征和富营养化评估

根据2013年5（春季）、8月（夏季）莱州湾海水环境要素的调查资料，采用富营养化指数、潜在性富营养化评价模式和灰色聚类分析方法研究环境要素特征和评估海水富营养化状况。结果表明，无机氮是莱州湾水质的主要污染要素，春夏季的N/P平均值分别为100.76、117.84，潜在性富营养化评价模式结果表明，春夏季各站位的营养级均只包括Ⅳ_P、Ⅵ_P两类，磷限制为莱州湾的营养盐结构特征；富营养化指数评价结果表明，春季和夏季E>1站位比例分别为65%、20%；灰色聚类分析结果表明，春季Ⅱ级、Ⅲ级的站位比例分别为95%、5%，夏季Ⅱ、Ⅲ级的站位比例分别为70%、25%，Ⅱ级中的部分站位具有较大潜在富营养化风险。     

Characterization of Ti powders mixed with TiO2 powders: Thermal and kinetic studies

The fire and explosion risks of metal powders admixed with solid inertants have been extensively investigated for many years. However, it remains unclear why such solid mixtures have high potential fire and explosion risk even when mixed with high percentages of non-combustible solids. This paper investigates how to interpret these risks, from a microscopic perspective, with thermal and kinetic parameters including initial ignition temperature, mass unit exothermic energy, activation energy and risk index of spontaneous combustion. The results show that the initial ignition temperature based on TG (Thermogravimetry) analysis is related to ignition sensitivity, and increased with percentage of admixed solid inertant. The unit mass exothermic energy based on DSC (Differential scanning calorimetry) analysis is related to flame spread velocity. Activation energy and the risk index of spontaneous combustion can be used to explain the reactivity and spontaneous combustion hazard, respectively, of metal powders. We conclude that thermal and kinetic parameters may provide another way to describe the fire and explosion risk of combustible powders, especially for nano metal powders due to the laboratory safety in the normative tests for explosion parameter determination.     

军用集成电路质量控制方法分析与探讨

集成电路是军用电子设备最重要的器件之一,集成电路的质量直接影响到军用装备的质量。从集成电路的选择、二次筛选和破坏性物理分析(DPA)这几个方面探讨了军用集成电路的质量控制方法。实践证明通过质量控制筛选得到的集成电路整批使用可靠性都有明显的提高。     

壳聚糖的物理/化学改性及其对含酚废水的处理

将壳聚糖物理改性为球形颗粒,然后在微波辐射下,球形壳聚糖与柠檬醛接枝反应,再与NaBH4还原反应,制备一种新型环保材料--物化改性壳聚糖.采用红外光谱仪(IR)、X衍射仪(XRD)、电子显微镜(SEM)和比表面测定及孔径分析仪(BET)结构表征改性壳聚糖.通过含酚制药废水的动态小柱吸附实验,研究了时间、柱高和出水流速等...     

Brain myelination in rats treated with ionizing radiation in utero

Abstract

Effects of ionizing radiation on brain myelination and some physical development parameters were studied in laboratory rats (Fisher F‐344 inbred strain). Rats were treated with three different doses of radiation (150 rad, 15 rad, and 6.8 rad) delivered on the 20th day of prenatal life. Exposure to 150 rad reduced body, brain, ovary, kidney, heart and spleen weights. Prenatal exposure to 150 rad of radiation reduced the cerebral cortex weight by 22 percent at 30 days of age, and 20 percent at 52 days of age which caused a reduction in cerebral cortex myelin content by 20 and 23 percent at the ages of 30 and 52 days respectively. This dose did not affect the myelin content of the cerebellum or the brain stem, or the myelin concentration (mg myelin/g brain tissue) of the cerebral cortex, cerebellum, and the brain stem. The cerebral cortex weight of the 15 rad treated rats was reduced at the age of 30 days. Exposure to 15 rad, and 6.8 rad did not affect either the myelin content or the myelin concentration of these brain areas.