7B04铝合金和30CrMnSiA钢短期腐蚀的电化学行为研究

目的研究7B04铝合金和30CrMnSiA合金钢试样的电化学性能。方法采用电化学实验、扫描电子显微镜(SEM)、腐蚀坑深度测试分别对7B04铝合金和30CrMnSiA合金钢试样在是否经过天然海水浸泡的情况下进行测试分析,得到微观腐蚀形貌和腐蚀坑深度以及试样表面不带锈和带锈时的电化学性能。结果随着Na Cl浓度增大,7B04铝合金和30CrMnSiA钢的自腐蚀电流变大,两者之间存在明显的电位差,接触后会发生电偶腐蚀。电偶电流与阴阳极面积比和Na Cl浓度有关,阴阳极面积比增大或Na Cl浓度升高均会导致电偶效应增强。经过海水短期浸泡后,7B04铝合金表面的锈层不仅没有起到抑制腐蚀的作用,反而使自腐蚀加重,但电偶效应确实有所减弱。结论沿海设备在使用过程中应竭力避免铝合金在锈层下工作。     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

TSP-PM10-PM2.5-2型中流量大气颗粒物采集系统的开发和应用

自行开发并研制了TSP-PM10-PM2.5-2型中流量TSP、PM10、PM2.5大气颗粒物采集系统,是目前中国唯一可以采集TSP、PM10、PM2.5样品并提供足够的样品量进行大气颗粒物化学成分分析的中流量大气颗粒物采集器.该系统精心设计和加工的限流孔可以保持完全固定的流量,保证切割粒径的稳定,减小采样的误差并方便操作.该系统已经成功地应用于20多个城市和地区大气颗粒物的监测和研究中,为研究大气颗粒物的污染状况和来源提供了有效的技术手段和支持.     

Interpretation of roadside PM10 monitoring data from Sunderland,United Kingdom

Roadside PM₁₀ has been monitored by Partisol® at three sitesin Sunderland between August 1997 and February 1998. The sites chosen were an inner city kerbside site; a roadside site adjacentto a dual carriageway on the outskirts of Sunderland with an openaspect; and a rural site.The results indicate that there is a seasonal variation in the relationship between the sites in terms of monitored PM₁₀.In the winter there is a poor correlation between the sites whereas in the summer significant correlations are obtained. Of the sites monitored PM₁₀ is consistently highest at the inner city roadside site. During the summer, exceedances of theU.K. 50 g m^-3 standard (DETR, 2000) are associated with conditions suitable for the build-up of photochemical pollutionhowever during the winter period exceedances are recorded duringa variety of weather conditions.At the dual carriageway site PM_2.5 has also been recorded and contributions to measured PM₁₀ are 77% in summer and68% in winter. The results illustrate a number of inconsistencies between this study utilising the Partisol® andothers reporting results where PM₁₀ has been monitored by TEOM®.     

环境监测业务管理系统的设计与开发

以郑州市环境监测中心站监测业务流程为例,从技术路线、系统结构设计、系统功能分析和技术实现等方面分析并介绍了环境监测业务管理系统的特点和开发时需解决的技术问题。探讨了建立基于B/S结构、J2EE技术架构、创新的组件装配方式、Oracle9i数据库、中间件和多层体系结构等多项先进技术进行系统实现的设计方案。     

Effects of meteorological conditions on PM10 concentrations - A study in Macau

Review on the annual PM₁₀ concentrations over a 10-year period shows that Macau is subjected to severe fine particulate pollution. Investigations of its variation in monthly and daily time scales with the local meteorological records reveal further details. It is found that a distinct feature of the Asian monsoon climates, the changes of wind direction, mainly controls the general trend of PM₁₀ concentration in a year. The monsoon driven winter north-easterly winds bring upon Macau dry and particle enriched air masses leading to a higher concentration in that period while the summer south-westerly winds transport humid and cleaner air to the region leading to a lower PM₁₀ value. This distinct seasonal feature is further enhanced by the lower rainfall volume and frequency as well as mixing height in winter and their higher counterparts in summer. It is also found that the development of tropical cyclones near Macau could also impose episode like PM₁₀ concentration spikes due to the pre-typhoon induced stagnant air motion followed by the swing of wind direction to the northerly.     

基于颗粒物浓度的沙尘天气分级标准研究

沙尘天气在近年对我国城市空气质量造成明显影响。目前我国沙尘天气分级仍然按照气象标准 ,主要是以水平能见度进行分级。文章参考国外的有关标准 ,通过统计近年来我国沙尘天气过程中的颗粒物浓度 ,结合我国沙尘天气的发生情况和特点 ,提出了基于沙尘浓度的沙尘天气分级标准     

乌鲁木齐市可吸入颗粒物(PM10)与总悬浮颗粒物(TSP)的相关性规律浅析

通过对乌鲁木齐市的PM10和TSP数据的对比分析，找出PM10在TSP中所占比率（分担率）在采暖季和非采暖季的变化范围，从而使过去采集的TSP数据与PM10数据有一定的可比性，保证监测数据的连续可比。     

基于B-P神经网络的环境质量评价方法

提出可将环境质量评价的无论是定量指标还是定性参数转化成"二进制"的"1"或"0",进而将这种二进制数引入B-P网络.通过实例探讨,这种新的B-P网络既适用于定量指标的水质参数又适用于定性指标的水质参数.     

因子分析法解析北京市大气颗粒物PM10的来源

2004年10月份在北京市6个采样点采集了大气PM10样品,分析了大气颗粒物的质量浓度、元素组成、离子、有机碳(OC)和元素碳(EC)的浓度,并用因子分析模型对颗粒物的来源进行了研究。结果显示,北京市大气颗粒物的来源主要有6类:建筑水泥尘/机动车尾气尘/燃煤尘、土壤风沙尘、二次粒子尘、工业粉尘、生物质燃烧尘和燃油尘。用模型计算得到的各源对PM10的贡献率分别为建筑水泥尘/机动车尾气尘/燃煤尘占36.57%、土壤风沙尘占16.07%、二次粒子尘占12.33%、工业粉尘占10.29%、生物质燃烧尘占6.07%、燃油尘占3.84%、其它占14.84%。其中建筑水泥/机动车尾气尘/燃煤尘、土壤风沙尘、二次粒子尘、工业粉尘是大气颗粒物PM10的主要来源。实验表明,在缺少源成分谱时可以用因子分析模型来分析大气颗粒物的来源及其相对贡献。