用煤矸石合成4A沸石分子筛处理氨氮废水

以煤矸石为原料,采用碱熔-水热法合成4A沸石分子筛。由于煤矸石中铝、硅主要以高岭土形式存在,其活化过程是合成4A沸石分子筛关键环节。为提高4A沸石分子筛钙离子的交换能力,增加对模拟废水氨氮的去除率,实验考察了碳酸钠与煤矸石质量比、活化温度、活化时间、晶化温度和晶化时间对4A沸石分子筛钙离子交换能力的影响,同时也考察了模拟废水的pH、4A沸石分子筛加入量及吸附时间对氨氮去除率的影响。结果表明,最佳工艺条件为,碳酸钠与煤矸石质量比为0.9、活化温度为800℃、活化时间1.5 h、晶化温度90℃和晶化时间3 h。合成4A沸石分子筛的钙离子交换能力为310 mg/g,在pH为6的100 mL模拟氨氮废水中加入6 g 4A沸石分子筛吸附40 min后,废水中氨氮的去除率达到86%。通过最佳工艺条件合成4A沸石分子筛,在处理氨氮废水方面具有一定的应用前景。     

表面活性剂改性4A分子筛对Cr(VI)的吸附行为

采用浸渍法对4A分子筛进行表面改性,通过引入阳离子表面活性剂,使4A分子筛表面附着季铵型阳离子,并与反离子Br-形成"阴离子交换膜",从而促使更多的Cr(VI)阴离子通过离子交换吸附到改性4A分子筛上,通过X-射线衍射(XRD)和傅里叶变换红外光谱(FTIR)对样品的物相结构和组成进行表征分析。研究表明,表面活性剂的类型和疏水碳氢链结构会影响4A分子筛的吸附能力,十八烷基三甲基溴化铵(OTAB)碳氢链长,在分子筛表面形成的双分子层密,对Cr(VI)的吸附量最大。采用准一级、准二级、Elovich和Bangham动力学模型对六价铬的吸附数据进行拟合,其中准一级动力学方程最符合十八烷基三甲基溴化铵改性分子筛的吸附行为。同时,分别从Langmuir和Redlich-Peterson等温吸附模型获得六价铬的最大吸附量为13.98 mg/g,且改性分子筛以均一表面吸附为主。     

Photodegradation of quinestrol in waters and the transformation products by UV irradiation

Quinestrol is synthetic estrogen used in contraceptive and hormone replacement therapy and occasionally for treating breast cancer and prostate cancer. It can make its way into the environment through sewage discharge and waste disposal produced by human excretions. In this study, the photodegradation kinetics of quinestrol in various conditions was investigated by UV and solar irradiation. The affecting factors were studied including concentration of hydrogen peroxide, different water types, and the initial concentrations of quinestrol. Concurrently, the transformation products and presumed pathways of quinestrol in distilled water by UV irradiation were identified and proposed. The results showed that the degradation of quinestrol in both irradiation conditions followed the pseudo-first-order kinetics. More rapid degradation was observed by UV irradiation (k = 0.018 min⁻¹) than solar irradiation (k = 0.004 h⁻¹), and the photodegradation rate of quinestrol depended on the concentration of hydrogen peroxide, the initial concentration of quinestrol and water types. The transformation products of quinestrol in distilled water were identified by gas chromatography/mass spectrometry. When exposed to UV irradiation, quinestrol in aqueous solution was rapidly degraded, giving at least ten photodegradation products. The chemical structures of ten degradation products were identified on the basis of mass spectrum interpretation and literature data.     

In vitro toxicity of fungicides with different modes of action to alfalfa anthracnose fungus,Colletotrichum destructivum

Abstract

Sensitivity of 24 isolates of Colletotrichum destructivum O’Gara, collected from alfalfa plants in Serbia, to eight selected fungicides, was investigated in this study. Molecular identification and pathogenicity test of isolates tested were also performed. Fungicide sensitivity was evaluated in vitro, using mycelial growth assay method. All isolates exhibited significant pathogenicity, causing necrosis at the alfalfa seedling root tips two days after inoculation. Using the primer pair GSF1-SR1 and by comparing the amplified fragments of the tested isolates with the marker (M), the presence of the amplicon of the expected size of about 900?bp was determined for all isolates. The isolates tested in this study showed different sensitivity towards fungicides in vitro. Mycelial growth was highly inhibited by QoI (quinone outside inhibitors) fungicide pyraclostrobin (mean EC₅₀=0.39?µg mL^?1) and by DMI (demethylation-inhibiting) fungicide tebuconazole (mean EC₅₀=0.61?µg mL^?1), followed by azoxystrobin (mean EC₅₀=2.83?µg mL^?1) and flutriafol (mean EC₅₀=2.11?µg mL^?1). Multi-site fungicide chlorothalonil and MBC (methyl benzimidazole carbamate) fungicide thiophanate-methyl evinced moderate inhibition with mean EC₅₀=35.31 and 62.83?µg mL^?1, respectively. Thirteen isolates were sensitive to SDHI (succinate dehydrogenase inhibitors) fungicide boscalid and fluxapyroxad, (mean EC₅₀=0.49 and 0.19?µg mL^?1, respectively), while the rest of isolates were highly resistant.     

活性艳橙K-7R分子印迹聚合物微球的制备及结合特性研究

以微米级聚苯乙烯微球为种球,活性艳橙K-7R为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用单步溶胀聚合法在水相中制得了分子印迹聚合物微球(MIPs),并用平衡吸附实验研究了其吸附性能。通过Scatchard分析,结果表明,MIPs在识别K-7R过程中存在两类结合位点,高亲和力结合位点的平衡离解常数Kd1=14.855μmol/L,最大结合量Qmax1=1.282μmol/g;低亲和力结合位点的平衡离解常数Kd2=70.939μmol/L,最大结合量Qmax2=3.930μmol/g。该MIPs对K-7R有较高的亲和性和选择性。     

高分子量高纯度阳离子聚丙烯酰胺的合成

以丙烯酰胺与丙烯酰氧乙基三甲基氯化铵为单体,在复合引发剂的作用下,选择水溶液共聚法合成高分子量与高纯度阳离子型聚丙烯酰胺(CPAM)。实验表明,有机偶氮引发剂A用量0.5‰、氧化还原引发剂用量0.45‰、还原剂与氧化剂摩尔比2∶1、反应体系pH为4与反应时间5 h条件下,CPAM分子量为1 042万,且溶解性好。通过对聚合物残单含量影响因素添加剂用量、反应时间的研究,结果表明,添加剂EDTA和增溶剂D对残留AM含量影响小,而苯甲酸钠对聚合物残留AM的含量影响显著;延长反应时间至7 h,残单含量可降低至0.27%,CPAM的纯度高。通过与国内外3种同类型产品进行对比,结果表明,自制产品的分子量明显高于其他产品,且残单含量比国内产品降低了50%～75%。     

土壤-植物系统中磷和砷相互作用关系的研究进展

砷元素导致的环境污染问题日益突出,施磷已成为植物修复砷污染土壤过程中必要强化措施之一。土壤-植物系统中磷和砷的相互作用关系是非常复杂的,研究表明：磷和砷在土壤中往往是共生的,但又存在竞争吸附关系;磷和砷在不同植物中的相互作用关系主要有拮抗效应和协同效应;有必要通过分子生物学手段对磷和砷表达基理进行深入研究,获得对砷具有超积累能力的植株。     

CuO（-CeO2）/SBA-15对萘氧化的催化活性及CO2选择性研究

通过浸渍法制备CuO/SBA-15和CuO-CeO2/SBA-15两种介孔材料催化剂,采用BET、XRD、TPR和XPS等对催化剂进行表征,重点考察催化剂对萘氧化反应的催化活性及对产物CO2的选择性。BET、XRD和XPS等实验结果表明CuO高度分散于介孔分子筛SBA-15中,CeO2可促进CuO在载体上的分散,同时能降低催化剂的TPR还原温度。活性测试结果表明CuO/SBA-15对萘氧化反应的催化活性较高,但是催化氧化的CO2选择性较低,温度在380℃时CO2的生成率仅为60%左右;CeO2的添加不仅提高了CO2的生成率,15%CuO-15%CeO2/SBA-15在325℃使CO2生成率达到99%,而且CeO2增强了催化剂的稳定性。     

PCDD/F enviromental impact from municipal solid waste bio-drying plant

The present work indentifies some environmental and health impacts of a municipal solid waste bio-drying plant taking into account the PCDD/F release into the atmosphere, its concentration at ground level and its deposition. Four scenarios are presented for the process air treatment and management: biofilter or regenerative thermal oxidation treatment, at two different heights. A Gaussian dispersion model, AERMOD, was used in order to model the dispersion and deposition of the PCDD/F emissions into the atmosphere. Considerations on health risk, from different exposure pathways are presented using an original approach. The case of biofilter at ground level resulted the most critical, depending on the low dispersion of the pollutants. Suggestions on technical solutions for the optimization of the impact are presented.     

混凝一气浮控制三卤甲烷生成势的研究

研究了混凝一气浮工艺对不同分子量区间三卤甲烷生成势（trihalomethanes formation potential,THMFP）的去除效果及絮体形态对THMFP去除效果的影响。结果表明,混凝一气浮工艺以去除大分子量区间THMFP为主,对小分子量区间THMFP的去除效果较差。UV254值与THMFP值的线性相关系数为0．9449,UV254值可以较好地反映THMFP的含量。絮体的分形维数为1．17～1．2时,孔隙率较大,可增加絮体对THMFP的活性吸附空间,且絮体相对密度较小,可增强同向絮凝作用,增加絮体和THMFP的接触概率,有利于气浮对THMFP的去除。