查干淖尔生态治理恢复期鸟类调查分析

鸟类是自然环境好坏的重要指示物种。为了解查干淖尔生态治理后的环境效果,2014年8月采用实地调查、文献调查、访谈调查等方法对查干淖尔生态治理效果及其鸟类分布等进行了调查。结果表明,2008年＂查干淖尔干湖盆治理项目＂启动后,鸟类数量逐年增加,查干淖尔生态环境逐步得以恢复。调查期间,共记录到鸟类112种,隶属于17目32科。     

人工增雨（雪）效果评估方法探索

人工增雨（雪）常用的评估方法为统计检验和物理检验,统计检验需要大量试验样本,且随机化试验在我国难以实现,大量样本无从获得。物理检验目前主要是雷达观测演变状况和飞机直接观测云内微物理参数,由于技术和能力有限,这些方法都难以实现。为了在人工影响天气作业后尽快得出评估结果供政府及环境保护等部门参考,利用雨滴谱记录数据对一次人工增雪作业后的效果进行了评估,发现这些数据在没有常规降雪记录情况下具有一定的参考价值。从评估结果看,人工增雪作业后,降水强度有明显增大的趋势。     

Activity-Based Patterns of Everyday Mobility: The Potential for Long-Term Behaviour Change Across Five Groups of Travellers

Abstract

Significant differences in our mobility patterns can be found in relation to both range/distance and form. While some people travel on multiple occasions to global destinations over the course of a year, others travel mainly locally, that is, by bicycle or on foot. Policymakers and planners need to have a clear conception of the different mobility patterns if they are to develop valid and precise measures promoting more sustainable forms of mobility. This paper points to five key mobility types based on an exploratory cluster analysis of approximately 20,000 Norwegian travel diaries. Three of the defined groups are dominated by the private car, while two are oriented towards the use of public transport, bicycling and walking. The key differences and similarities between the mobility types are discussed and the relationship between everyday travel patterns and long-distance travel is analysed. Opportunities and challenges for transformations in the everyday travel habits of the five groups are discussed in the final section.     

Life-cycle phosphorus use efficiency of the farming system in Anhui Province,Central China

The rapid increase of phosphorus (P) use in farming has raised concerns regarding its conservation and environmental impact. Increasing the P use efficiency (PUE) is an approach to mitigating these adverse impacts. In this study, we applied substance flow analysis (SFA) to establish a life-cycle P use efficiency model to determine the life-cycle PUE of the farming system used in Anhui Province in 2011, which is typical of the agriculture practiced in central China. Based on this model, the P flows and PUEs of five subsystems were identified and quantified: crop farming, crop processing, livestock breeding, rural living, and urban living. The three largest P flows were found in the crop farming and livestock breeding subsystems; it can therefore be concluded that these subsystems have substantial impacts on the entire farming system. In contrast, the PUEs of crop farming, rural consumption, and livestock breeding subsystems presented the three lowest PUEs (58.79%, 71.75%, and 76.65%, respectively). These results were also consistent with the finding that the greatest P losses occurred in crop farming and livestock breeding. Consequently, the study proposes that great potential exists for increasing PUEs in the farming system of Anhui, and several of the most promising measures could be combined for improving PUEs. Finally, the study assesses data quality and presents a sensitivity analysis for use in interpreting the results. The study also shows that improving PUE and decreasing P losses in farming systems through improved nutrient management must be considered an important issue, and this study represents valuable experience in resource conservation and agricultural development in China.     

Two decades,three WEEE systems: How far did EPR evolve in Korea's resource circulation policy?

Extended producer responsibility (EPR) has become a dominant policy paradigm for the management of waste electrical and electronic equipment (WEEE) in the last two decades. In South Korea the principle has guided the evolution of the resource circulation policy even before its official introduction through a revision of the recycling law in 2002. Elements of producer responsibilities could be found in the producer-based deposit refund system (DRS) a decade earlier and they were strengthened through the enactment of a new resource circulation law in 2008. This article reviews the policy changes in South Korea for the management of WEEE during the past 20 years. The focus of the analysis is on the impacts of EPR and the producers’ responses that were expressed through the quantity and the quality of material flows in the society. The findings are discussed in light of international experiences in order to outline measures to improve the effectiveness of the EPR-based resource circulation policy that could have broader implications beyond the case study.     

长沙市灰霾天气与气象因子相关性研究

根据长沙市2013年PM2.5的逐日质量平均浓度、气象地面和高空观测数据,采用SPSS方法,分析了长沙市灰霾天气发生与气象因子的关系。结果表明:长沙市区的灰霾日以西北风向为主,PM2.5浓度与风速、降水呈显著负相关,与相对湿度、大气压、平均气温相关不明显。风速越小越不利于大气污染物的扩散,在没有降水的情况下,风速达到3.5m/s以上,空气质量才有好转;弱降水对污染物的浓度不会有明显的影响,降水量在5mm以下时,污染物的浓度不会有明显的下降,但强降水对空气有净化作用明显,在不同季节,不同时段,不同天气形势下降水的稀释作用不同;长沙秋冬季边界层稳定性几率高达80%以上,这种稳定层结构是长沙市区各种大气污染源不易扩散的重要因素之一。     

Environmental resource footprinting of drug manufacturing: Effects of scale-up and tablet dosage

The formulation and scale-up of batch processes is one of the major challenges in the development of pharmaceutical dosage forms and at the same time a significant resource demanding process which is generally overlooked in environmental sustainability assessments. First, this paper proposes general trends in the experience curve of cumulative resource consumption of pharmaceutical tablet manufacturing of PREZISTA^® 800 mg through wet granulation (WG) at four consecutive scales in both R&D and manufacturing environments (resp. WG1 = 1 kg/h, WG5 = 5 kg/h, WG30 = 30 kg/h and WG240 = 240 kg/h). Second, the authors aim at evaluating the environmental impact from a life cycle perspective of a daily consumption of PREZISTA^® 2× 400 mg tablets versus the bioequivalent PREZISTA^® 800 mg tablet which was launched to enhance patient compliance. Environmental sustainability assessment was conducted at three different system boundaries, which enables identification, localization and eventually reduction of burdens, in this case natural resource extraction. Exergy Analysis (EA) was used at process level (α) and plant level (β) while a cradle-to-gate Exergetic Life Cycle Assessment (ELCA) was conducted at the overall industrial level (γ) by means of the CEENE method (Cumulative Exergy Extraction from the Natural Environment). Life cycle stages taken into account are Active Pharmaceutical Ingredient (API) production, Drug Product (DP) production and Packaging. At process level (α), the total resource extraction for the manufacturing of one daily dose of PREZISTA^® (800 mg tablet) amounted up to 0.44 MJ_ex at the smallest scale (WG1) while this amount proved to be reduced by 58%, 79% and 83% at WG5, WG30 and WG240 respectively. Expanding the boundaries to the overall industrial level (γ) reveals that the main resource demand is at the production of the Active Pharmaceutical Ingredient (API), excipients, packaging materials and cleaning media used in DP production. At the largest scale (WG240) the use of cleaning media during DP production contributes considerably less to the total resource extraction. Overall, the effect of scale-up and learning on resource consumption during DP production showed to possess a power-law experience curve y = 2.40 * x^−0.57 when shifting from WG1 (smallest lab scale) to WG240 (industrial manufacturing). Tablet dosage (2× 400 mg versus 1× 800 mg) did not significantly affect the absolute environmental burden. However, the relative contribution of resource categories did change due to the different production technology. It could be concluded that in meeting social and economic demands by launching the PREZISTA^® 800 mg tablet, no trade-off in environmental burden occurred. On the long term, future research should strive to take into account R&D processes and all services related to pipeline activities taking place prior to market launch and eventually to allocate impacts to the final product.     

System dynamics model for analyzing effects of eco-design policy on packaging waste management system

EU's long-term objective is to become a recycling and resource effective society, where waste is utilized as a resource and waste generation is prevented. A system dynamics model was developed to analyze the policy mechanisms that promote packaging material efficiency in products through increased recycling rates. The model includes economic incentives such as packaging and landfill taxes combined with market mechanisms, behavioral aspects and ecological considerations in terms of material efficiency (the packaging material per product unit, recycled fraction in products). The paper presents the results of application of various policy instruments for increasing packaging material efficiency and recovery rate and reducing landfilled fraction. The results show that a packaging tax is an effective policy instrument for increasing the material efficiency. It ensures the decrease of the total consumption of materials and subsequent waste generation. The tax helps to counteract a rebound effect, which, as identified by the analysis, can be caused by reduced material costs due to eco-design. The model is applied to the case of Latvia. Yet, the elements and structure of the model developed are similar to waste management systems in many countries. By changing numeric values of certain parameters, the model can be applied to analyze policy mechanisms in other countries.     

攀枝花市城市基础设施与土地收益关联度分析

以攀枝花市为例,综合运用GIS空间分析技术和变异系数权重分析、灰色关联度等方法建立了城市基础设施与土地收益的关联度模型,定量分析城市基础设施与土地收益的关联关系,揭示两者间的关联规律和作用机理.结果表明：①城市基础与土地收益存在较大关联性;②城市基础设施与土地收益关联度在时间序列上具有明显的波动性且呈周期性变化;③城市基础设施与土地收益关联度在空间上呈分异特征.     

项目环评在化工企业厂区平面布置优化中的作用

以河南某化工企业为例,从厂区功能区划分、主要污染源分布、排水路线制定、卫生和安全防护等方面对其进行厂区平面布置合理性分析,通过分析评价各关键因素对周围环境及敏感点的影响程度大小对厂区平面布置进行适当调整和优化。由案例可知,项目环评不仅能够有效削减工业污染物排放对厂区人员和附近敏感点的影响,而且能够有效反馈厂区平面设计中存在的不足,通过优化调整降低铁路、高压线、环境敏感点跨辖区搬迁等限制条件对项目主要生产功能区布置的影响,提高企业生产中的卫生安全和风险防护水平,降低企业环保投入,实现经济和环保效益协调发展。