阶式生物接触氧化对富营养化太湖水源水中溶解有机物的去除性能研究

构建阶式生物接触氧化反应器处理富营养化太湖水源水，对其净水效能进行研究。结果表明，在优化工况条件下，阶式生物氧化反应器的三阶对太湖水源水中DOC的累积去除率分别为34．4％、40．2％和47．5％，对BDOC的总去除率为68．4％，除生物降解外，填料拦截、生物吸附絮凝等物理、化学作用对去除原水中的DOC仍有重要作用。DOC分子量分级表明，太湖源水中含量最大的是分子量〈500Da的DOC，含量最小的是分子量在5k～500Da间的DOC。阶式生物接触氧化反应器对分子量〈500 Da的DOC的去除率在60％以上，而出水中5k～500 Da区间的DOC含量相比原水增加近1倍。     

表面活性剂改性4A分子筛对Cr(VI)的吸附行为

采用浸渍法对4A分子筛进行表面改性,通过引入阳离子表面活性剂,使4A分子筛表面附着季铵型阳离子,并与反离子Br-形成"阴离子交换膜",从而促使更多的Cr(VI)阴离子通过离子交换吸附到改性4A分子筛上,通过X-射线衍射(XRD)和傅里叶变换红外光谱(FTIR)对样品的物相结构和组成进行表征分析。研究表明,表面活性剂的类型和疏水碳氢链结构会影响4A分子筛的吸附能力,十八烷基三甲基溴化铵(OTAB)碳氢链长,在分子筛表面形成的双分子层密,对Cr(VI)的吸附量最大。采用准一级、准二级、Elovich和Bangham动力学模型对六价铬的吸附数据进行拟合,其中准一级动力学方程最符合十八烷基三甲基溴化铵改性分子筛的吸附行为。同时,分别从Langmuir和Redlich-Peterson等温吸附模型获得六价铬的最大吸附量为13.98 mg/g,且改性分子筛以均一表面吸附为主。     

混凝一气浮控制三卤甲烷生成势的研究

研究了混凝一气浮工艺对不同分子量区间三卤甲烷生成势（trihalomethanes formation potential，THMFP）的去除效果及絮体形态对THMFP去除效果的影响。结果表明，混凝一气浮工艺以去除大分子量区间THMFP为主，对小分子量区间THMFP的去除效果较差。UV254值与THMFP值的线性相关系数为0．9449，UV254值可以较好地反映THMFP的含量。絮体的分形维数为1．17～1．2时，孔隙率较大，可增加絮体对THMFP的活性吸附空间，且絮体相对密度较小，可增强同向絮凝作用，增加絮体和THMFP的接触概率，有利于气浮对THMFP的去除。     

Spore inhibition-based enzyme substrate assay for monitoring of aflatoxin M1 in milk

A spore germination-based concept and its transformation into a field level prototype for monitoring aflatoxin M₁ (AFM₁) in milk was developed. Initially, 15 strains of Bacillus spp. procured from different culture collection were screened for AFM₁ sensitivity using spot assay and marker strain showing inhibition at 0.5 ppb was selected based upon maximum zone of inhibition. The selected strain B. megaterium 2949 was further screened for different enzymes activities and subsequently its spores were produced to an extent of 73.13% ± 3.197% in newly developed sporulation medium containing beef extract (0.0075% ± 0.0004%), yeast extract (0.015% ± 0.001%), peptone (0.0375% ± 0.0016%), and sodium chloride (0.0375% ± 0.0018%). A spore germination-based concept/ assay was optimized by immobilizing spores in eppendorf with pretreated milk (80°C/15 min) containing germinant and chromogenic substrate followed by incubation at 37°C. The appearance of sky blue color within real time of 45 min indicated spores germination and release of specific marker enzyme such as acetyl esterase and its specific action on chromogenic substrate which demonstrates absence of AFM₁ in milk. However, if there was no color change, presence of AFM₁ at 0.5 ppb MRL was denoted by Codex. The developed concept on AFM₁ detection was validated and a correlation of 0.97 was established with AOAC approved Charm 6602 and ELISA at Codex MRL with minimal false positive and negative results. The cost effective test has potential application in dairy farms, manufacturing, and R&D units for routine monitoring of AFM₁ in milk.     

活性艳橙K-7R分子印迹聚合物微球的制备及结合特性研究

以微米级聚苯乙烯微球为种球,活性艳橙K-7R为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用单步溶胀聚合法在水相中制得了分子印迹聚合物微球(MIPs),并用平衡吸附实验研究了其吸附性能。通过Scatchard分析,结果表明,MIPs在识别K-7R过程中存在两类结合位点,高亲和力结合位点的平衡离解常数Kd1=14.855μmol/L,最大结合量Qmax1=1.282μmol/g;低亲和力结合位点的平衡离解常数Kd2=70.939μmol/L,最大结合量Qmax2=3.930μmol/g。该MIPs对K-7R有较高的亲和性和选择性。     

高分子量高纯度阳离子聚丙烯酰胺的合成

以丙烯酰胺与丙烯酰氧乙基三甲基氯化铵为单体,在复合引发剂的作用下,选择水溶液共聚法合成高分子量与高纯度阳离子型聚丙烯酰胺(CPAM)。实验表明,有机偶氮引发剂A用量0.5‰、氧化还原引发剂用量0.45‰、还原剂与氧化剂摩尔比2∶1、反应体系pH为4与反应时间5 h条件下,CPAM分子量为1 042万,且溶解性好。通过对聚合物残单含量影响因素添加剂用量、反应时间的研究,结果表明,添加剂EDTA和增溶剂D对残留AM含量影响小,而苯甲酸钠对聚合物残留AM的含量影响显著;延长反应时间至7 h,残单含量可降低至0.27%,CPAM的纯度高。通过与国内外3种同类型产品进行对比,结果表明,自制产品的分子量明显高于其他产品,且残单含量比国内产品降低了50%～75%。     

Co3O4/介孔分子筛催化剂对苯催化完全氧化的研究

分别以介孔分子筛MCM-41、MCM-48、SBA-15为载体，采用等体积浸渍法制备了氧化钴/介孔分子筛催化剂，利用N₂吸附、X射线衍射、程序升温还原等技术对催化剂进行了表征，考察了Co₃O₄的负载量及载体的孔结构对催化剂完全催化氧化苯的性能的影响。结果表明，Co₃O₄的负载量为20%时，催化剂的催化活性最好；载体的孔径和催化剂的可还原性能是影响催化活性的主要因素，催化剂活性顺序为Co₃O₄ /SBA-15> Co₃O₄ /MCM41> Co₃O₄ /MCM-48。