火电湿法烟气脱硫流程优化的实现方案研究

在给定脱硫流程模拟优化参数的情况下,尝试了基于DCS系统和基于OA局域网的两种优化控制改进方案,后一种方案解决了优化控制系统的安全性、稳定性、扩展性、易管理等问题。同时采用该控制系统的3号脱硫系统的控制效果最佳,且脱硫效率循环浆液泵功率比随着操作方式相近度的提高而呈递增趋势。     

Persistence and mobility of 2,4-D in unsaturated soil zone under winter wheat crop in sub-tropical region of India

The present study was undertaken to determine the persistence and mobility of 2,4-dichlorophenoxy acetic acid (2,4-D) in unsaturated soil zone under real field conditions for the wheat crop in Roorkee, India. Three experimental plots were chosen in the agricultural field itself to represent the real field conditions in the study area and the potential movement and persistence of herbicide 2,4-D was investigated under three different irrigation treatments. The presence of herbicide along with soil water content was determined in soil at different depths at a temporal scale. The movement of the herbicide was also simulated numerically by solving the coupled soil water content movement and mass transport equations using HYDRUS-1D. The measured soil water content trends and the 2,4-D concentration profiles showed a good agreement with the numerically simulated results. The maximum effect of the herbicide was primarily retained up to 15 cm of the soil profile. The current existing dosage of 0.5 kg ha⁻¹ of pesticide was found to be safe to avoid soil contamination as no residue of 2,4-D was traced at the end of the wheat crop season in any of the plots. Higher concentrations of 2,4-D were also simulated numerically and the simulated results showed that the safe dosage of pesticide application would depend on irrigation treatments.     

Seismic fragility analysis of a coupled tank-piping system based on artificial ground motions and surrogate modeling

The catastrophic consequences of recent NaTech events triggered by earthquakes highlighted the inadequacy of standard approaches to seismic risk assessment of chemical process plants. To date, the risk assessment of such facilities mainly relies on historical data and focuses on uncoupled process components. As a consequence, the dynamic interaction between process equipment is neglected. In response to this gap, researchers started a progressive integration of the Pacific Earthquake Engineering Research Center (PEER) Performance-Based Earthquake Engineering (PBEE) risk assessment framework. However, a few limitations still prevent a systematic implementation of this framework to chemical process plants. The most significant are: (i) the computational cost of system-level simulations accounting for coupling between process equipment; (ii) the experimental cost for component-level model validation; (iii) a reduced number of hazard-consistent site-specific ground motion records for time history analyses.In response to these challenges, this paper proposes a recently developed uncertainty quantification-based framework to perform seismic fragility assessments of chemical process plants. The framework employs three key elements: (i) a stochastic ground-motion model to supplement scarcity of real records; (ii) surrogate modeling to reduce the computational cost of system-level simulations; (iii) a component-level model validation based on cost-effective hybrid simulation tests. In order to demonstrate the potential of the framework, two fragility functions are computed for a pipe elbow of a coupled tank-piping system.     

Simulation of the flow of an explosive atmosphere exposed to a hot surface

The accidental ignition of combustible atmospheres by hot surfaces is of great concern for chemical and process plant safety. In this paper, we present our research regarding the evolution of thermal plumes originating from hot hemispheres and discs. In particular, we focus on the effect of the orientation of the surface on the ignition process. The auto-ignition temperatures and ignition locations were studied experimentally. To get further insight, we conducted detailed numerical simulations and validated them with measurements. Three-dimensional simulations were performed on hot hemispheres and hot discs for different orientations ranging from 0° to 180°. The solver employs a transient, implicit scheme which is based on the coupled heat transfer and flow equations. The mesh in the vicinity of the hot surfaces is refined to resolve the steep temperature gradients and to capture the boundary layer separation. The influence of the orientation on critical hot spots in the gas mixture is analysed by examining the flow structures and the temperature evolution of the buoyancy-driven flow. Using the obtained results, we discuss the change of the onset and location of the ignition.     

上、下悬窗阻风能力对比研究

环境风会改变排烟窗附近的烟气流向和速度,影响建筑内烟气流动,进而导致建筑自然排烟效率受到影响。采用数值模拟方法,对比研究了排烟窗开启角度和环境风对上、下悬窗阻风能力的影响,分析了不同开窗角度下,悬窗进风量和进风区域随开窗角度和风速的变化规律。结果表明:上、下悬窗相对进风量与开窗角度均成指数关系,但上悬窗阻风能力弱于下悬窗,上悬窗开窗角度大于45°后即失去阻风能力,而下悬窗开窗角度大于75°后才逐渐失去阻风能力,且开窗角度小于30°时,下悬窗至少能比上悬窗多减少50%空气进入室内。上悬窗开窗角度小于56°时,主要进风区域为近窗下侧水平区域;下悬窗开窗角度小于30°时,主要进风区域为窗体两侧及远窗下侧竖直区域,随着开窗角度增大,上、下悬窗主要进风区域均过渡到远窗下侧竖直区域。窗体用于日常通风时建议优选上悬窗。若要用于排烟,则应首选下悬窗,开窗角度15°即可满足阻风要求,若选用上悬窗,开窗角度不宜大于45°。     

新管幕法下穿铁路既有线施工地表沉降监测

为避免新管幕法下穿铁路既有线施工所导致的轨面不平、列车晃车等铁路运营事故,以太原市迎泽大街下穿火车站通道工程为施工背景,考虑火车站内强电磁干扰环境对传统电磁、电容式传感器的影响,选用合适的光纤光栅传感器对地表沉降进行监测,设计了监测方案并搭建了监测系统,获得了施工引起的地表沉降数据,并用数值模拟方法研究了土体沉降,获得了地表横向距离沉降规律,对比论证了该监测技术的正确性和有效性。监测和计算结果表明,新管幕法施工引起的地表沉降呈漏斗状,中间大两头小,监测断面的最大沉降值为21.2 mm,在施工安全范围内。     

排土场稳定性影响因素显著性研究

为提升排土场稳定性,以某露天煤矿排土场为例,结合正交试验和强度折减法,开展排土场稳定性影响因素显著性研究。通过分析资料与野外调研,厘定典型排土场稳定性诱发因素,构建排土场真三维地质模型,反演验证和分析排土场的岩土体参数和变形规律特征,得出排土场边坡内部应力和位移的变化特征以及塑性破坏区分布范围;以真三维网格模型中最危险截面为依据构建理想模型,设计正交试验模拟方案并开展数值模拟,对模拟结果进行方差分析,寻求显著影响因素。研究结果表明:台阶数量、台阶高度、气象水文和台阶角度等对排土场稳定性的影响为极显著;台阶宽度对排土场稳定性的影响为显著。     

外力作用下管道内表面缺陷处裂纹扩展研究

为提高油气管道安全风险评估的准确性,以含内表面缺陷管道为研究对象,利用ABAQUS软件线弹性及弹塑性分析不同尺寸缺陷对裂纹萌生特征的影响;采用扩展有限元法,建立管道3点弯曲模型与全尺寸静载物理试验,并非线性拟合裂纹扩展尺寸,研究内表面缺陷处裂纹扩展情况。研究结果表明:内表面缺陷中心处极易萌生裂纹,随着缺陷尺寸的增大,裂纹萌生所需外力在缺陷相对长度为0.08、相对深度为0.4时的增长趋势变化较大,且缺陷深度对裂纹萌生的影响更大;对比数值模拟与全尺寸物理试验,发现在小于70 mm位移载荷或147.25 kN外力下裂纹尺寸快速扩展,之后呈变缓的趋势;非线性拟合裂纹尺寸,得到较为准确的裂纹扩展尺寸的预测结果。     

火电湿法烟气脱硫塔模拟及优化操作分析

基于火电石灰石-石膏湿法烟气脱硫工艺,以华能福州电厂实际生产数据为依据,经对设备分别简化建模,建立了反映实际脱硫过程的脱硫塔模型,形成全工艺模拟流程,模型计算结果和实际运行数据间平均误差为0.4364%.对脱硫工艺过程进行灵敏度分析,得出循环浆液pH值、烟气流量、液气比等因素对吸收效率的影响.最后,以灵敏度分析结论为基础,借助多目标优化方法分析不同工况下各控制因素对脱硫效率的影响,得到基本优化控制范围(pH值处于5.4～5.6、烟气压力处于0～1000Pa)和相应的最优控制方案,并分析了优化操作结果的工业适用性.     

中国表层土壤有机质空间分布模拟分析方法研究

气候变化背景下,对土壤有机碳的研究是目前大尺度上土壤性质研究的热点。基于第二次全国土壤普查5 374个典型土壤剖面数据,分析表层土壤有机质(20 cm)与环境因素的相关关系,利用多元回归模型和HASM模型结合的方法模拟中国国家尺度上表层土壤有机质含量的空间分布格局,探讨该方法的模拟误差,为国家尺度上有机碳的估算提供方法参考。研究结果表明,对350个检验点模拟结果的平均绝对误差和平均相对误差为15.61 g.kg-1和56.59%,与普通克里格法相比分别降低了1.61 g.kg-1和20.84%;对样点分布较少以及无样点的西北地区和台湾省的模拟结果也更符合实际情况。建模样点减少一半的情况下,模拟结果的平均绝对误差和平均相对误差仅分别增加了0.14 g.kg-1和1.07%。因此,论文方法可作为模拟国家尺度上有机质空间分布相对有效的方法,同时如何使模型解释更多的土壤有机质空间变异将是进一步提高模拟精度的关键。