2015—2020年广东臭氧污染特征、污染天气分型及局地气象要素影响

利用2015—2020年广东省102个国控大气环境监测站臭氧(O₃)监测数据、广东省21个地市国家基本气象站地面气象观测数据和欧洲中期天气预报中心(ECMWF)第五代大气再分析全球气候数据(ERA5再分析资料)，研究了2015—2020年广东O₃污染特征、污染天气分型及局地气象要素影响.结果表明：2017—2019年广东O₃污染较严重，4—5月O₃浓度逐步上升，6月出现一定下降后7月开始持续上升，峰值出现在9—10月；珠三角O₃超标率明显高于全省其他地区，粤东O₃超标率低于全省平均水平，但浓度平均值高于全省其他地区.基于自组织映射(SOM)方法，将2015—2020年逐日海平面气压和10 m水平风进行分型得到12类环流型，按污染程度分为“污染天气型”、“轻污染天气型”和“清洁天气型”.其中“污染天气型”有台风外围叠加副高型、冷锋前部型、热带系统降水前静稳型、高压底前部型4类.12类天气型所对应的O₃浓度与日照时数、最高气温呈显著正相关...     

基于QAR数据的中国民航飞行排放清单估计研究

近年来中国民用航空迅速发展，产生了大量的排放物，需要准确的排放清单来评估民航行业对环境的影响.针对现有的研究在估算精度与覆盖范围上存在的不足，本文利用了飞机QAR数据构建了估算单次飞行燃油消耗量与包括HC、CO、NOx、PM、SO2以及CO2在内的排放物生成量的方法，并采用自下而上的方法，对2018年1月—2021年11月在中国国内民航活动产生的排放物进行了统计.在估算时考虑了机型、起飞机场和降落机场对飞行各阶段持续时间的影响.从排放模式来看，不同机场的飞行在LTO阶段的平均排放量存在差异，总的来说，机场规模越大，单次飞行排放量越多，大多数排放物在CCD阶段排放且该阶段的排放量与飞行时间存在明显的线性关系.2018年和2019年的排放量保持了上升，CO2排放量分别为73.17 ×10⁶ t和76.85 ×10⁶ t，但自从2019年12月受到新冠疫情影响后，排放量与航班量随疫情控制情况波动，2020年和2021年1月—11月CO2排放量分别为61.51 ×10⁶ t和60.08 ×10⁶ t.为了探究新冠疫情对排放物的影响，采用差分整合移动平均自回归模型对无疫情时2019年12月之后的排放量进行了估计，结果表明新冠疫情爆发后，到2021年11月为止各种排放物的排放量减少了20%左右.     

石墨炉原子吸收法测定环境水样中铊

对石墨炉原子吸收法测定水中铊的分析条件进行优化,并比较不同前处理方法对测定结果的影响。结果表明仪器的最佳分析条件为:灰化温度和原子化温度分别为700和1 600℃,进样量为40μL,基体改进剂为0.5%的钯与硝酸镁。直接进样、MIBK萃取法和铁沉淀富集3种前处理方法对应的检出限分别为0.76,0.07和0.02μg/L;分别测定5,0.5和0.1μg/L含铊水样,其相对标准偏差分别为4.2%,6.1%和8.4%,加标回收率分别为92%,91%和88%,即3种样品前处理方式下,石墨炉原子吸收法对环境水样中铊均具有较好的测定效果。直接进样法适用于铊浓度较高的水样,MIBK萃取法和铁沉淀法则适用于较清洁水样。     

黑色岩系地质高背景区土壤锌富集特征与环境活性

锌（Zn）既是生物体必需元素又是有害元素，在复合污染的情况下，Zn在植物吸收、转运和富集镉的过程中发挥着重要作用。以往研究主要关注镉的活性，忽略了Zn的环境活性。基于此，本研究以黑色岩系地质高背景区自然富Zn土壤为对象，重点研究了土壤Zn的活性态和潜在活性态，讨论了Zn活性的影响因素和环境意义。结果表明，研究区土壤Zn富集，平均含量可达457 mg/kg，80%的土壤样品超过我国农用地土壤污染风险筛选值。CaCl₂提取态Zn含量平均值为0.92 mg/kg，平均提取率仅为0.26%，说明研究区土壤Zn的生物活性低，且随着pH升高而降低。EDTA提取态Zn的平均含量为12.7 mg/kg，平均提取率为2.74%，潜在有效态比例也较低。活性态在潜在活性态中占比为7.63%，活化潜力较大，且随着土壤pH的升高而降低。研究区土壤溶液中Zn∶Cd比较低，可能有利于植物对镉的吸收。开展土壤Zn活性的研究，对理解复合污染区土壤镉的活性变化及调控具有重要意义。     

Effects of manufactured nanomaterials on algae: Implications and applications

● Summary of positive and negative effects of MNMs on algae. ● MNMs adversely affect algal gene expression, metabolite, and growth. ● MNMs induce oxidative stress, mechanical damage and light-shielding effects on algae. ● MNMs can promote production of bioactive substances and environmental remediation. The wide application of manufactured nanomaterials (MNMs) has resulted in the inevitable release of MNMs into the aquatic environment along their life cycle. As the primary producer in aquatic ecosystems, algae play a critical role in maintaining the balance of ecosystems’ energy flow, material circulation and information transmission. Thus, thoroughly understanding the biological effects of MNMs on algae as well as the underlying mechanisms is of vital importance. We conducted a comprehensive review on both positive and negative effects of MNMs on algae and thoroughly discussed the underlying mechanisms. In general, exposure to MNMs may adversely affect algae’s gene expression, metabolites, photosynthesis, nitrogen fixation and growth rate. The major mechanisms of MNMs-induced inhibition are attributed to oxidative stress, mechanical damages, released metal ions and light-shielding effects. Meanwhile, the rational application of MNMs-algae interactions would promote valuable bioactive substances production as well as control biological and chemical pollutants. Our review could provide a better understanding of the biological effects of MNMs on algae and narrow the knowledge gaps on the underlying mechanisms. It would shed light on the investigation of environmental implications and applications of MNMs-algae interactions and meet the increasing demand for sustainable nanotechnology development.     

Recent advances in special morphologic photocatalysts for NOx removal

● Systematic information of recent progress in photocatalytic NO _x removal is provided. ● The photocatalysts with special morphologies are reviewed and discussed. ● The morphology and photocatalytic NO _x removal performance is related. The significant increase of NO_x concentration causes severe damages to environment and human health. Light-driven photocatalytic technique affords an ideal solution for the removal of NO_x at ambient conditions. To enhance the performance of NO_x removal, 1D, 2D and 3D photocatalysts have been constructed as the light absorption and the separation of charge carriers can be manipulated through controlling the morphology of the photocatalyst. Related works mainly focused on the construction and modification of special morphologic photocatalyst, including element doping, heterostructure constructing, crystal facet exposing, defect sites introducing and so on. Moreover, the excellent performance of the photocatalytic NO_x removal creates great awareness of the application, which has promising practical applications in NO_x removal by paint (removing NO_x indoor and outdoor) and pavement (degrading vehicle exhausts). For these considerations, recent advances in special morphologic photocatalysts for NO_x removal was summarized and commented in this review. The purpose is to provide insights into understanding the relationship between morphology and photocatalytic performance, meanwhile, to promote the application of photocatalytic technology in NO_x degradation.     

2000～2021年成渝城市群PM2.5时空变化及驱动机制多维探测

研究成渝城市群PM_2.5浓度时空变化和驱动机制，对区域大气环境保护和国家经济可持续发展具有重要意义.基于PM_2.5遥感数据、 DEM数据、基于站点的气象数据、 MODIS NDVI数据、人口密度数据、夜间灯光数据、路网数据和土地利用类型数据，采用Theil-Sen Median趋势分析和Mann-Kendall显著性检验等方法，结合地理探测器，在多时空尺度上分析成渝城市群PM_2.5时空变化，并探测影响其变化的驱动机制.结果表明，2000～2021年成渝城市群PM_2.5浓度整体呈波动下降态势，冬季PM_2.5污染最为突出.PM_2.5浓度具有明显的空间异质性，呈现出“中间高，四周低”的空间分布特征，PM_2.5浓度高值区主要集中在自贡、内江、资阳和广安，PM_2.5浓度呈显著下降的区域主要集中在重庆西部等地.因子探测结果表明，成渝城市群PM_2.5浓度空间分异受气候、地形、植被和人文因子共同影响.高程、...     

酶底物法与多管发酵法和纸片法监测环境水样大肠菌群的比较

用标准菌株对比了酶底物法和多管发酵法及快速纸片法,监测分析了分组环境水样中的大肠菌群。结果表明,酶底物法操作快速、简单、结果稳定、无二次污染,能满足水质监测和应急监测的需求。