The pollution halo effect of technology spillover and pollution haven effect of economic growth in agricultural foreign trade: two sides of the same coin?

Environmental Science and Pollution Research - The existing literature on the environmental Kuznets curve (EKC) fails to investigate the spatial attribute of the “pollution halo” effect...     

A comparison analysis of the decoupling carbon emissions from economic growth in three industries of Heilongjiang province in China

Environmental Science and Pollution Research - Growing environmental pressure urges China to develop in a sustainable and low carbon way, and thus China strives to achieve a carbon peak by 2030 and...     

Effect of pressure and atmosphere during hydrothermal treatment on the properties of sewage sludge-derived solid fuel

Journal of Material Cycles and Waste Management - Efforts to improve the performance of hydrothermal treatment (HT) in producing high-quality solid fuel from sewage sludge were carried out by...     

中国生态环境科技创新体系建设研究

分析国内外生态环境科技创新的发展现状，相比较国外以市场机制为导向、以企业为创新主体、政府通过政策和管辖支撑创新的体系特征，我国已形成四大类环境类科创载体，但尚未形成成熟有效的技术成果产业化机制以及市场与政策协同促进科技创新的发展模式。本文根据生态环境科技创新的强政策驱动性、技术验证放大周期长以及集成性强的特点，重点通过环境技术研发、技术成果转化、技术放大与赋能、产业拓展与推广四个方面阐述了生态环境科技创新体系建设的主要环节：环境技术的研发由以科研机构为主的传统自发性研发、企业迭代性研发和联合应用型研发组成；技术成果的转化经历挖掘发现、技术识别与判断、知识产权评估评价后进入已成立的企业或新设公司，在这一过程中，成果转化专业队伍起着至关重要的作用；技术放大与赋能旨在为有创新技术的企业提供科技创新政策、二次研发中试验证、首台套工程案例、投融资等资源的对接，以协助初创企业成长；产业的拓展与推广则通过为解决环境问题形成集成方案、孵化平台为企业背书和产业政策匹配等方式助力企业长期发展。最后从加强专业化创新平台、技术评估体系、成果转化人才培养体系建设以及疏通投融资渠道等方面对中国未来生态环境科技创新发展提出相关建议。     

Evaluation of photolysis and hydrolysis of pyraclostrobin in aqueous solutions and its degradation products in paddy water

This study evaluated the hydrolysis and photolysis kinetics of pyraclostrobin in an aqueous solution using ultra-high-performance liquid chromatography–photodiode array detection and identified the resulting metabolites of pyraclostrobin by hydrolysis and photolysis in paddy water using high-resolution mass spectrometry coupled with liquid chromatography. The effect of solution pH, metal ions and surfactants on the hydrolysis of pyraclostrobin was explored. The hydrolysis half-lives of pyraclostrobin were 23.1–115.5?days and were stable in buffer solution at pH 5.0. The degradation rate of pyraclostrobin in an aqueous solution under sunlight was slower than that under UV photolysis reaction. The half-lives of pyraclostrobin in a buffer solution at pH 5.0, 7.0, 9.0 and in paddy water were less than 12?h under the two light irradiation types. The metabolites of the two processes were identified and compared to further understand the mechanisms underlying hydrolysis and photolysis of pyraclostrobin in natural water. The extracted ions obtained from paddy water were automatically annotated by Compound Discoverer software with manual confirmation of their fragments. Two metabolites were detected and identified in the pyraclostrobin hydrolysis, whereas three metabolites were detected and identified in the photolysis in paddy water.     

Using culturomics and social media data to characterize wildlife consumption

Wildlife provides food, medicine, clothing, and other necessities for humans, but overexploitation can disrupt the sustainability of wildlife resources and severely threaten global biodiversity. Understanding the characteristics of consumer behavior is helpful for wildlife managers and policy makers, but the traditional survey methods are laborious and time-consuming. In contrast, culturomics may more efficiently identify the features of wildlife consumption. As a case study of the culturomics approach, we examined tiger bone wine consumption in China based on social media and Baidu search engine data. Tiger bone wine is one of the most purchased tiger products; its consumption is closely related to tiger poaching, which greatly threatens wild tiger survival. We searched a popular social media website for the term “tiger bone wine” and focused on posts that were originally created from 1 January 2012 to 31 December 2018. We filtered and classified posts related to the purchase, sale, or consumption of tiger bone wine and extracted information on providers, consumption motivations, year of production, and place of origin of the tiger bone wines based on the texts and photos of these posts. We found 756 posts related to tiger bone wine consumption, 113 of which mentioned providers of tiger bone wine, including friends (53%), elder relatives (37%), peer relatives (7%), and others (3%). Out of the 756 posts, 266 indicated the motivations of tiger bone wine consumption. Tiger bone wines were consumed as a tonic (34%), medicine (23%), game product (30%), and a symbol of wealth (28%). Some posts indicated ≥2 consumption motivations. These findings were consistent with the search queries from Baidu index. Such information could help develop targeted strategies for tiger conservation. The culturomics approach illustrated by our study is a rapid and cost-efficient way to characterize wildlife consumption.     

Ti3C2纳米层状材料对废水中Cr（Ⅵ）的光催化去除性能

以Ti₃AlC₂为原料,采用HF刻蚀工艺制备出12种Ti₃C₂纳米层状材料,对其形貌进行了表征,并考察了以其作为光催化剂对废水中Cr（Ⅵ）的处理效果。实验结果表明：HF体积分数为80%、刻蚀时间为48 h时得到的MX-80-48的形貌较好;MX-80-48具有类似石墨烯的二维层状结构,纳米层厚度约20~50 nm,孔径2~10 nm,比表面积14.8 m²/g,在400~700 nm可见光范围内表现出强烈的吸光性;当Cr（Ⅵ）的初始质量浓度为40.00 mg/L、MX-80-48投加量为200 mg/L、pH=2、反应时间4 h（暗反应1 h+光照3 h）时,Cr（Ⅵ）去除率可达100%。     

加速溶剂同时萃取和净化-气相色谱-三重四极杆串联质谱测定土壤和沉积物中8种多溴联苯醚

建立了土壤和沉积物中8种多溴联苯醚(PBDEs,BDE-28、BDE-47、BDE-99、BDE-100、BDE-153、BDE-154、BDE-183和BDE-209)加速溶剂同时萃取和净化-气相色谱-三重四极杆串联质谱(ASE-GC-MS-MS)的分析方法。通过优化加速溶剂萃取与弗罗里硅土在线净化和串联质谱多反应监测模式的条件,较好地去除基质干扰,并提高了三重四极杆串联质谱定性的准确性及定量的灵敏性。该方法采用改进的色谱柱能同时分析包括高溴代联苯醚BDE-209在内的8种PBDEs,其浓度范围为1～100 ng/mL(BDE-209为10～1 000 ng/mL),线性良好,线性回归系数均大于0.997。方法检出限为0.004～0.1 ng/g,方法回收率为75%～110%,方法精密度为2.4%～15.6%。适于批量处理土壤和沉积物中含有多组分痕量PBDEs的样品。     

Combination with catalyzed Fe(0)-carbon microelectrolysis and activated carbon adsorption for advanced reclaimed water treatment: simultaneous nitrate and biorefractory organics removal

A process combining catalyzed Fe(0)-carbon microelectrolysis (IC-ME) with activated carbon (AC) adsorption was developed for advanced reclaimed water treatment. Simultaneous nitrate reduction and chemical oxygen demand (COD) removal were achieved, and the effects of composite catalyst (CC) addition, AC addition, and initial pH were investigated. The reaction kinetics and reaction mechanisms were calculated and analyzed. The results showed that CC addition could enhance the reduction rate of nitrate and effectively inhibit the production of ammonia. Moreover, AC addition increased the adsorption capacity of biorefractory organic compounds (BROs) and enhanced the degradation of BRO. The reduction of NO₃^?–N at different pH values was consistently greater than 96.9%, and NH₄⁺–N was suppressed by high pH. The presence of CC ensured the reaction rate of IC-ME at high pH. The reaction kinetics orders and constants were calculated. Catalyzed iron scrap (IS)-AC showed much better nitrate reduction and BRO degradation performances than IS-AC and AC. The IC-ME showed great potential for application to nitrate and BRO reduction in reclaimed water.

     

Comparison on surface properties and desulfurization of MnO2 and pyrolusite blended activated carbon by steam activation

In this study, MnO₂ and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO₄, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurization.

Implications: MnO₂ and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurizatio.