衡阳市区和衡山背景站臭氧浓度变化规律的对比分析

选取衡阳市区和衡山背景站臭氧自动监测数据,分析两地的臭氧污染特征。对空气质量的优良率情况、臭氧作为首要污染物的变化情况、臭氧浓度的日变化特征、典型时段的浓度变化特征、臭氧浓度的月际变化特征和臭氧与PM_(2.5)的关联情况等进行了分析。结果表明,多云及阴雨天气时,衡阳市区的臭氧浓度日变化幅度大于衡山背景站。夏季,衡阳市区和衡山背景站的臭氧浓度的日变化特征规律差异较大,臭氧浓度分布比较分散,前者为典型的单峰形,后者则波动平缓。冬季,日变化幅度不大,但衡阳市区的臭氧浓度明显低于衡山背景站。衡山背景站和衡阳市区的臭氧基本同步变化,但日均值高于衡阳市区。     

同步辐射光谱技术在有机固废污染控制与资源化研究中的应用

有机固废中碳、磷、硫及重金属等元素赋存形态是决定其环境行为、反应活性及资源化再利用的关键因素.同步辐射光谱技术可以在分子水平、微纳米尺度原位表征有机固废中碳、磷、硫、重金属等元素赋存形态、结合位点、微观结构,为深入阐明有机固废环境行为、反应机制提供直接的证据.概述了X射线吸收光谱、微束X射线荧光光谱等同步辐射光谱技术在有机固废污染控制与资源化研究的中应用进展,并对同步辐射光谱技术在该领域应用前景和发展趋势进行了展望,以期为有机固废资源化再利用及其污染控制等研究提供参考.     

Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

原子荧光法测定水中汞的原子化条件研究

分别采用热原子化原子荧光法(热汞法)和冷原子化原子荧光法(冷汞法)测定水中汞,比较了两种方法的检出限、线性相关系数、准确度和精密度的差异。冷汞法和热汞法的检出限分别为0.003和0.01μg/L,标准曲线相关系数分别为0.999 9和0.999 7,加标回收率范围分别为102%~106%和106%~113%。结果表明,冷汞法比热汞法具有更低的检出限,灵敏度和准确度也略优于热汞法。对于冷汞法,提高负高压有利于提高方法的灵敏度、准确度,并具有更低的方法检出限。     

中国生态环境科技创新体系建设研究

分析国内外生态环境科技创新的发展现状，相比较国外以市场机制为导向、以企业为创新主体、政府通过政策和管辖支撑创新的体系特征，我国已形成四大类环境类科创载体，但尚未形成成熟有效的技术成果产业化机制以及市场与政策协同促进科技创新的发展模式。本文根据生态环境科技创新的强政策驱动性、技术验证放大周期长以及集成性强的特点，重点通过环境技术研发、技术成果转化、技术放大与赋能、产业拓展与推广四个方面阐述了生态环境科技创新体系建设的主要环节：环境技术的研发由以科研机构为主的传统自发性研发、企业迭代性研发和联合应用型研发组成；技术成果的转化经历挖掘发现、技术识别与判断、知识产权评估评价后进入已成立的企业或新设公司，在这一过程中，成果转化专业队伍起着至关重要的作用；技术放大与赋能旨在为有创新技术的企业提供科技创新政策、二次研发中试验证、首台套工程案例、投融资等资源的对接，以协助初创企业成长；产业的拓展与推广则通过为解决环境问题形成集成方案、孵化平台为企业背书和产业政策匹配等方式助力企业长期发展。最后从加强专业化创新平台、技术评估体系、成果转化人才培养体系建设以及疏通投融资渠道等方面对中国未来生态环境科技创新发展提出相关建议。     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

How does population structure affect pollutant discharge in China? Evidence from an improved STIRPAT model

Environmental Science and Pollution Research - China is the most populous country in the world, and the pollution caused by the excessive population should not be underestimated. In recent years,...     

废旧硬质聚氨酯泡沫塑料的木质素改性及再生

采用含有二乙二醇(DEG)和乙醇胺(ETA)的双组分解交联剂降解废旧硬质聚氨酯泡沫塑料(PU硬泡),并利用降解得到的低聚物多元醇与木质素复合制备出性能增强的再生PU硬泡。通过对制备的再生PU硬泡的红外光谱、密度、吸水率、抗压强度、热稳定性、导热系数、热重曲线等进行分析测试,考察m(DEG)∶m(ETA)对再生PU硬泡性能的影响。实验结果表明:m(DEG)∶m(ETA)=1∶3时废旧PU硬泡的降解效果最好;木质素加入量为2.0%(w)时再生PU硬泡的密度低、抗压强度高、保温性能良好,达到国家标准《建筑绝热用硬质聚氨酯泡沫塑料》(GB/T 21558—2008)的品质要求。     

The associations of air pollution exposure during pregnancy with fetal growth and anthropometric measurements at birth: a systematic review and meta-analysis

Environmental Science and Pollution Research - Fetal growth has been demonstrated to be an important predictor of perinatal and postnatal health. Although the effects of maternal exposure to air...     

层状氧化物NaCo_2O_4热催化H_2O_2降解亚甲基蓝

采用固相烧结法制备了NaCo_2O_4催化剂,构建了NaCo_2O_4-H_2O_2热催化体系降解亚甲基蓝(MB)。XRD和SEM表征结果显示,合成的NaCo_2O_4催化剂具有良好的稳定性。NaCo_2O_4对H_2O_2具有良好的热催化性能,反应温度越高,反应速率常数k越大,该催化反应符合一级动力学方程。NaCo_2O_4-H_2O_2体系对MB具有较好的降解效果,在反应温度为50℃、NaCo_2O_4加入量为50 mg、MB溶液加入量为100 mL、MB初始质量浓度为30 mg/L、H_2O_2加入量为1.00 mL的最优条件下,反应340 min时,MB降解率达87.00%;催化剂重复使用三次,MB降解率仍可达85%以上;经捕获剂效果对比实验发现,催化反应体系中存在h~+、·OH等催化活性物种。