低浓度下4个取代苯污染物与硝酸铅的混合对发光菌的联合毒性

多种污染物混合特别是低浓度下的混合对生物的联合毒性是生态毒理学研究的热点之一。选择了3类污染物苯酚、间甲基苯酚、苯胺、对硝基苯胺、硝酸铅,采用美国微板光度计测定了它们对发光菌青海弧菌-Q67(Vibrio-qinghaiensis sp.-Q67)的单一及联合毒性。应用非线性拟合技术模拟了这5种物质及其混合物的剂量-效应曲线,硝酸铅可用Logit模型模拟,其它4个物质能用Weibull模型准确描述,所有拟合相关系数在0.98以上,均方根误差在0.02以下。根据纯物质的EC50值,获得这5个物质的毒性强弱顺序:硝酸铅〉对硝基苯胺间甲基苯酚苯酚苯胺。混合实验设计了各物质在EC50、EC1、无观察效应浓度(no observed effect concentration,NOEC)比例的混合。用浓度加和(dose addition,DA)和独立作用模型(independent action,IA)对混合物毒性进行预测。IA基本准确预测了这5个物质在各自EC50混合的毒性。DA与IA模型都稍微过高地预测了以EC1及NOEC浓度比例混合的联合毒性,但都在毒理学实验容许的范围之内。这5个物质以NOEC混合时对测试生物Q67没有产生明显毒性,但是还不能判定这些物质在此浓度下混合是安全的。污染物在各自的NOEC浓度下混合是否对其它生物有潜在的威胁还需更多毒理学实验支持。     

Impact of land use on shallow groundwater quality characteristics associated with human health risks in a typical agricultural area in Central China

Environmental Science and Pollution Research - Groundwater pollution seriously threatens water resource safety due to high-intensity land use throughout the world. However, the relationship between...     

北京森林土壤富里酸亚组分的表征及荧光指标分析

为探究土壤FA（富里酸）的结构组成及其腐殖化和芳香性特征,采用SFS（同步荧光光谱）技术结合FRI（荧光区域积分）、DSFS（导数荧光光谱）及PCA（主成分分析）对土壤FA亚组分的荧光光谱特征及荧光指标间的相关性进行了分析.利用XAD-8吸附树脂结合初始pH为3、5、7、9和13的Na₄P₂O₇（焦磷酸钠）缓冲溶液逐步洗脱技术将土壤FA分别分级得5种亚组分（FA₃、FA₅、FA₇、FA₉和FA₁₃）.结果表明:①FA₃-FA₁₃的SFS体现3类荧光峰,分别代表类蛋白、类富里酸和类腐殖酸物质.FA₃和FA₅含有含量相近的类蛋白、类富里酸和类腐殖酸物质,而FA₇-FA₁₃含有的主要成分是类蛋白物质;同时,FA₇-FA₁₃的类富里酸和类腐殖酸较FA₃和FA₅更为复杂,且FA₇-FA₁₃含有更多易降解的单环芳香族化合物.②FA₃和FA₅的类酪氨酸和类色氨酸物质被识别,且FA₇-FA₁₃的类色氨酸含量明显大于类富里酸和类腐殖酸含量.③FA₃-FA₁₃光谱荧光强度指标（I₂₄₀/I₃₄₀、I₂₄₀/I₄₅₀、I₃₄₀/I₂₇₀、I₄₅₀/I₂₇₀和I₄₅₀/I₃₄₀）的对比分析表明,FA₃和FA₅的腐殖化程度和芳香性均大于FA₇-FA₁₃.④荧光指标A_FLR/A、A_HLR/A、S_270-340、S_270-450、A₂/A₁和A₃/A₁可作为指示亚组分芳香性的优化指标,且A_HLR/A、A₂/A₁和A₃/A₁可作为最佳指标反映亚组分的腐殖化程度.研究显示,土壤FA亚组分的结构表征及荧光指标分析为后续FA亚组分与环境污染物相互机理研究提供依据,为探究有机质的结构特性和环境行为提供理论支撑.      

SBR-COR工艺处理高浓度、多品种混合化工污水

介绍了ＳＢＲ－ ＣＯＲ 工艺处理高浓度、多品种混合化工污水的工艺流程、工作原理及闲置保养情况，详细地阐述了活性污泥生物相与运行状况的关系。实际运行表明，ＳＢＲ－ ＣＯＲ 具有重新启动所需时间短、微生物激活快，对浓度高、毒性大的化工污水具有耐冲击特性，外理效果显著。     

天然沸石同步去除水中氨氮和磷酸盐

通过静态吸附实验考察了浙江缙云产天然沸石对溶液中氨氮和磷酸盐的同步去除能力及机制,结果表明,天然沸石对溶液中氨氮的吸附过程较好地满足拟二级动力学模型、Langmuir和Dubinin-Radushkevich等温吸附模型。天然沸石对磷酸盐的去除能力随溶液中初始氨氮浓度的增加而增加。当溶液pH由7.0增加到9.0时,天然沸石对氨氮的吸附能力随之增加,而当pH由9.0增加到10时,天然沸石对氨氮的吸附能力则下降。当溶液pH低于7.5时,天然沸石对溶液中的磷酸盐无去除能力,当溶液pH位于7.5～9.0时,天然沸石对磷酸盐的去除能力随pH的增加急剧增加,当溶液pH大于9.0时,天然沸石对磷酸盐的去除能力随pH的增加则呈下降趋势。天然沸石对溶液中氨氮和磷酸盐的同步去除过程是自发进行、吸热及熵增加的过程。天然沸石对溶液中氨氮的吸附机制为离子交换,对磷酸盐的去除机制则为化学沉淀作用。     

菱铁矿催化过氧化氢-过硫酸钠修复地下水中1,2-二氯乙烷污染

采用菱铁矿催化过氧化氢-过硫酸钠双氧化剂体系去除地下水中的1,2-二氯乙烷,通过研究菱铁矿催化机理以及氧化剂浓度两方面探讨双氧体系较单氧体系有较高去除率的原因,探讨了双氧体系1,2-DCA降解动力学和氯离子平衡。研究结果表明,菱铁矿催化双氧体系可以有效去除溶液中的1,2-DCA,本体系条件下去除率可达到95%以上。其较低的pH,较高Fe2+浓度,较高自由基生成量和氧化剂浓度,使得双氧体系较Fenton-Like体系有较高1,2-DCA去除率。菱铁矿催化双氧体系去除1,2-DCA反应过程中有中间产物生成,但最终完全脱氯,没有中间产物残留。     

太湖水体溶解性有机质荧光特征及其来源解析

利用三维荧光光谱(3DEEM)-平行因子分析(PARAFAC)技术,通过野外现场调查和室内模拟实验,分析富营养化湖泊(太湖)水体溶解性有机质(DOM)组成结构、分布规律及其来源,进一步研究藻类和水生植物残骸腐烂分解以及沉积物释放对水体DOM荧光组成特征的影响.结果表明:1太湖水体各个湖区DOM主要以类色氨酸物质(T1、T2峰)为主,竺山湾还存在类腐殖质和类富里酸物质,其荧光指数(f450/500)为1.53±0.06,接近陆源f450/500值(1.4),DOC浓度全湖最高((7.13±2.45)mg·L-1),兼具陆源与生物来源的双重特性.2太湖藻类DOM组成丰富,出现了7种荧光组分,主要为类腐殖质、类富里酸和类蛋白物质(包括类色氨酸和类酪氨酸),藻类腐烂分解后,紫外区类色氨酸T2峰和类酪氨酸B2峰消失,其他类蛋白物质和部分易降解的类富里酸物质向水体中释放,其中A峰和C峰所代表的类富里酸物质降解率较高,分别降解了70.3%和41.0%.3水生植物DOM以类腐殖酸物质为主,其残骸腐烂分解后DOM由陆源类腐殖质向类腐殖酸物质转化.4沉积物DOM出现了5类荧光峰,兼具外源污染的类富里酸荧光C峰和A峰,同时含有生物来源的B1、B2、T2类蛋白荧光峰,随其降解时间的增长,T2荧光峰消失,B1、B2荧光物质降解率分别高达86.5%和82.5%,而C峰和A峰分别上升25.1%和1.5%,沉积物降解过程中大量类蛋白物质向上覆水体中释放,同时部分类蛋白物质向着更稳定的类富里酸物质转化.因此,外源输入和内源负荷(藻类和水生植物残骸腐烂分解以及沉积物释放等)对湖泊水体DOM组成结构以及富营养化过程具有重要影响.     

Optimisation algorithms for spatially constrained forest planning

We compared genetic algorithms, simulated annealing and hill climbing algorithms on spatially constrained, integrated forest planning problems. There has been growing interest in algorithms that mimic natural processes, such as genetic algorithms and simulated annealing. These algorithms use random moves to generate new solutions, and employ a probabilistic acceptance/rejection criterion that allows inferior moves within the search space. Algorithms for a genetic algorithm, simulated annealing, and random hill climbing are formulated and tested on a same-sample forest-planning problem where the adjacency rule is strictly enforced. Each method was randomly started 20 times and allowed to run for 10,000 iterations. All three algorithms identified good solutions (within 3% of the highest found), however, simulated annealing consistently produced superior solutions. Simulated annealing and random hill climbing were approximately 10 times faster than the genetic algorithm because only one solution needs to be modified at each iteration. Performance of simulated annealing was essentially independent of the starting point, giving it an important advantage over random hill climbing. The genetic algorithm was not well suited to the strict adjacency problem because considerable computation time was necessary to repair the damage caused during crossover.     

Enhanced cross-flow filtration with flat-sheet ceramic membranes by titanium-based coagulation for membrane fouling control

• Ceramic membrane filtration showed high performance for surface water treatment. • PTC pre-coagulation could enhance ceramic membrane filtration performance. • Ceramic membrane fouling was investigated by four varied mathematical models. • PTC pre-coagulation was high-effective for ceramic membrane fouling control. Application of ceramic membrane (CM) with outstanding characteristics, such as high flux and chemical-resistance, is inevitably restricted by membrane fouling. Coagulation was an economical and effective technology for membrane fouling control. This study investigated the filtration performance of ceramic membrane enhanced by the emerging titanium-based coagulant (polytitanium chloride, PTC). Particular attention was paid to the simulation of ceramic membrane fouling using four widely used mathematical models. Results show that filtration of the PTC-coagulated effluent using flat-sheet ceramic membrane achieved the removal of organic matter up to 78.0%. Permeate flux of ceramic membrane filtration reached 600 L/(m²·h), which was 10-fold higher than that observed with conventional polyaluminum chloride (PAC) case. For PTC, fouling of the ceramic membrane was attributed to the formation of cake layer, whereas for PAC, standard filtration/intermediate filtration (blocking of membrane pores) was also a key fouling mechanism. To sum up, cross-flow filtration with flat-sheet ceramic membranes could be significantly enhanced by titanium-based coagulation to produce both high-quality filtrate and high-permeation flux.