Personal exposure to PM2.5-bound heavy metals associated with cardiopulmonary function in general population

Environmental Science and Pollution Research - To better understand the cardiopulmonary alterations associated with personal exposed PM2.5-bound heavy meals, we conducted a cross-sectional study in...     

基于安全度与运营格局的油库选址优先级评价方法研究

从安全性和运营角度对油库选址的影响因素及评价指标分析对油库的安全稳定及有效运营具有重要的意义。该文选取与安全和运营有关的人口企业数量、安全管理能力、消防设施规划、地形地质条件、铁路公路数量、市场投资收益、政策支持情况等影响因子进行重要性及合理程度分析,综合运用安全度与运营格局影响因素多元耦合关系,构建了油库区安全与运营评价体系,改进了原有的模糊层次法评价模型,并对某油库区安全度与运营格局进行了评估验证。结果表明:利用改进模糊层次法能够较好地评价不同地址的优先级,评价模型具有一定应用性,能够对不同地址的特点及评价权重进行有效分析,可见油库选址优先级评价方法是实用且有效的。该研究方法及结果可以为油库区地址的优选提供一定参考与建议。     

Photodegradation of amoxicillin by catalyzed Fe3+/H2O2 process

Three oxidation processes of UV-Fe³⁺(EDTA)/H₂O₂ (UV: ultraviolet light; EDTA: ethylenediaminetetraacetic acid), UV-Fe³⁺/H₂O₂ and Fe³⁺/H₂O₂ were simultaneously investigated for the degradation of amoxicillin at pH 7.0. The results indicated that, 100% amoxicillin degradation and 81.9% chemical oxygen demand (COD_Cr) removal could be achieved in the UV-Fe³⁺ (EDTA)/H₂O₂ process. The treatment efficiency of amoxicillin and COD_Cr removal were found to decrease to 59.0% and 43.0% in the UV-Fe³⁺/H₂O₂ process; 39.6% and 31.3% in the Fe³⁺/H₂O₂ process. Moreover, the results of biodegradability (biological oxygen demand (BOD₅)/COD_Cr ratio) revealed that the UV-Fe³⁺ (EDTA)/H₂O₂ process was a promising strategy to degrade amoxicillin as the biodegradability of the effluent was improved to 0.45, compared with the cases of UV-Fe³⁺/H₂O₂ (0.25) and Fe³⁺/H₂O₂ (0.10) processes. Therefore, it could be deduced that EDTA and UV light performed synergetic catalytic effect on the Fe³⁺/H₂O₂ process, enhancing the treatment efficiency. The degradation mechanisms were also investigated via UV-Vis spectra, and high performance liquid chromatography-mass spectra. The degradation pathway of amoxicillin was further proposed.     

我国灾害信息传播的研究现状与展望

近年来灾害事件频发,有关灾害信息传播的研究成为传播学的一个热点研究方向,目前我国灾害信息传播的研究角度众多,取得了较为丰硕的成果,但大多还只停留在个案研究层面,系统研究有待加强。本文在分析现状的基础上,提出了整合传播是我国灾害信息传播研究的新方向,并可分出传播渠道整合、传播内容整合和传媒自身整合等众多研究分支。     

嗜热菌株AT07-1的分离鉴定及其在污泥溶解预处理厌氧发酵产氢中的应用

从湖南大学花园土壤中采集样品,用稀释涂布法分离和纯化适于污泥溶解的典型嗜热菌菌株,从中选出一株高效菌进行形态观察,并对其进行生理生化鉴定.结果表明,该菌株的革兰氏染色为阳性,呈细杆状,产芽孢,为好氧或兼性需氧细菌,最适生长温度为65℃,最适生长pH值为6.8~7.5.通过16SrDNA碱基测序和对比证实,该菌株是目前尚未报道过的一株嗜热菌,GenBank中注册命名为Bacillus thermophilic bacteria AT071(注册号:FJ231108).同时,将其纯种菌用于嗜热酶溶解（solubilization by thermophilic enzyme,S-TE）污泥稳定化处理,接种该嗜热菌可促进污泥中悬浮固体的溶解,2.5d时接种试验挥发性悬浮固体 (volatile suspended solid,VSS)溶解率达到59.41%,比不接种试验同期提高了25.58%,达到了EPA规定的污泥稳定化要求.进一步对经AT071预处理的污泥厌氧产氢效果进行研究,试验结果显示,接种处理后污泥发酵产氢效果良好,高出未接种处理（65℃热处理）污泥26.4%,发酵气体中只含有H2和CO2.     

外加淀粉酶预处理污泥厌氧发酵产氢研究

通过外加淀粉酶预处理剩余污泥,考察了淀粉酶对污泥的破解效果,研究了接种产氢菌(Enterococcus sp.LG1)和未接种产氢菌两种状况下,污泥厌氧发酵产氢效果,并与相应温度(60℃)热预处理污泥的发酵产氢效果进行对比,同时分析探讨了污泥发酵产氢过程中底物和pH值的变化.结果表明,淀粉酶预处理污泥4h后水解效果最佳...     

含乐果废水的循环电-Fenton氧化过程及其影响因素

为克服传统Fenton(Conventional Fenton,简称CF)法中存在着Fe2 在反应初始时即被氧化且反应过程中产生大量铁泥(Fe的复杂络合物)的不足,研究了循环电-Fenton(Circulating Electro Fenton,简称CEF-FeRe)法氧化降解自配乐果废水的过程及其各影响因子的作用机制.CEF-FeRe反应所需的H2O2通过蠕动泵缓慢加入到电解池中,而被氧化了的Fe2 又在阴极被还原,使得Fenton反应能持续进行.在乐果浓度为200mg·L-1时,通过多个单因素试验确定最佳CEF-FeRe反应条件为:常温、pH值为3.0、H2O2/Fe2 的摩尔比为10、H2O2的加入量为理论剂量、恒流0.5A.结果表明,在此条件下反应120min后COD去除率为81.67%,乐果在25min内去除率为99.4%.通过测定CEF-FeRe以及CF反应过程中Fe2 和H2O2的变化情况验证了CEF-FeRe反应的机理.动力学研究结果表明.乐果废水的CEF-FeRe反应符合一级动力学反应规律.CEF-FeRe法处理实际乐果废水也可以得到91.16%的乐果去除及68.53%的COD去除,这表明CEF-FeRe法处理乐果废水效率高且运行费用较低的特点.     

不同酶强化污泥为燃料微生物燃料电池特性对比分析

采用单室无膜悬浮阴极微生物燃料电池(MFC),对比分析了蛋白酶和淀粉酶强化剩余污泥为燃料的MFC(ESMFC)产电特性、酶特性和污泥减量化效果。研究表明,投加蛋白酶的ESMFC最大功率密度比对照组增加106.2%,投加淀粉酶时ESMFC最大功率密度比对照组增加48%。蛋白酶作用主要体现在投加后的前12小时,而淀粉酶作用时间则较长,为投加后的前144小时,但在运行前期,由于高温作用,导致系统内的酶活性较强,投加的淀粉酶作用则不明显。投加蛋白酶的系统内TCOD、TSS和VSS去除率分别为82%、65%和85%,而投加淀粉酶的系统内TCOD、TSS和VSS去除率分别达到86%、67%和88%。此研究对于ESMFC中外加酶的选择具有一定意义。     

Full-scale blending treatment of fresh MSWI leachate with municipal wastewater in a wastewater treatment plant

Fresh leachate, generated in municipal solid waste incineration (MSWI) plants, contains various pollutants with extremely high strength organics, which usually requires expensive and complex treatment processes. This study investigated the feasibility of blending treatment of MSWI leachate with municipal wastewater. Fresh MSWI leachate was pretreated by coagulation–flocculation with FeCl₃ 2 g/L and CaO 25 g/L, plate-and-frame filter press, followed by ammonia stripping at pH above 12. After that, blending treatment was carried out in a full-scale municipal wastewater treatment plant (WWTP) for approximately 3 months. Different operational modes consisting of different pretreated leachate and methanol addition levels were tested, and their performances were evaluated. Results showed that throughout the experimental period, monitored parameters in the WWTP effluent, including COD (<60 mg/L), BOD₅ (<20 mg/L), ammonium (<8 mg/L), phosphorus (<1.5 mg/L) and heavy metals, generally complied with the Chinese sewage discharged standard. Under the experimental conditions, a certain amount of methanol was needed to fulfill TN removal. An estimation of the operation cost revealed that the expenditure of blending treatment was much lower than the total costs of respective treatment of MSWI leachate and municipal wastewater. The outcomes indicated that blending treatment could not only improve the treatability of the MSWI leachate, but also reduce the treatment cost of the two different wastewaters.     

β-环糊精接枝羧甲基壳聚糖吸附剂的制备及其性能

采用γ-氨丙基三乙氧基硅烷化学修饰活化后的硅胶,以戊二醛为交联剂,接上羧甲基壳聚糖,继而接枝上β-环糊精作为功能单体,制备了一种用于分离富集水样中Cu(Ⅱ)的固相萃取新材料。利用红外光谱(FT-IR)、比表面分析(BET)、X射线衍射光谱(XRD)以及热重分析(TG)等方法对吸附剂进行结构表征。采用火焰原子吸收(FAAS)作为检测手段,考察了溶液p H、振荡时间、吸附剂用量、样品流速、洗脱液浓度和体积等对吸附剂吸附Cu(Ⅱ)的影响。吸附剂饱和吸附容量为9.37 mg/g,最大富集倍数高达350。吸附过程能用准二级动力学模型和Langmuir等温吸附方程进行很好的拟合。应用于环境水样中Cu(Ⅱ)的分离富集与测定,回收率在96.8%~105.2%之间,效果较好。