Concentrations of Hchs and Ddts in the Tissues of River Dolphins,Platanista Gangetica,From the River Ganges,India

Abstract

Concentrations of HCH and DDT organochlorine insecticide residues were measured in blubber, muscle and oil samples from three specimens of river dolphins, Platanista gangetica, from the River Ganges, India. Concentrations of HCH and DDT ranged from 94 to 289 ng g^?1 and from 1324 to 9388 ng g^?1 on wet wt. basis respectively. Comparisons are made with other aquatic mammals and other studies on river dolphins. P. gangetica appears to exhibit similar patterns of accumulation with age and with ß-HCH and p-p′-DDE being accumulated to higher levels than other HCH isomers and parent DDT and its other metabolites, respectively. These organochlorines may pose a health risk to river dolphin populations that are already showing evidence of environmental stress. Further studies are recommended.     

Investigation of performance enhancement of solar still incorporated with Gallus gallus domesticus cascara as sensible heat storage material

In this research work, the conventional single slope still (CSS) with egg shells of breed Gallus gallus domesticus cascara as sensible heat storage (SHS) material are studied experimentally to enhance the yield. In this experimental investigation, the proposed single slope still (PSS) with SHS material was made in comparison with the CSS to evaluate the productivity of fresh water under the same ambient conditions. Comparatively, this PSS has higher thermal conductivity than the CSS. The yield obtained from the PSS is 2.46 L/m², while the yield from the CSS is 2.07 L/m². The average rate at which the rise of output fresh water obtained from the PSS is 18% more than the fresh water output obtained from the CSS. The daily energy efficiency of the PSS is 26.07%, and for the CSS, it is only 22.25%. The daily exergy efficiency of the PSS is 2.36%, and for the CSS, it is only 1.67%. Since using the egg shell will employ as organic waste management and modification in this still is economical, less initial, and maintenance cost.

     

Nanotechnology for improved production of algal biofuels: a review

Environmental Chemistry Letters - Fossil fuel depletion and carbon dioxide emissions are calling for carbon neutral energies such as algal biofuels, yet actual production of agal biofuels is...     

Lignin and polylactic acid for the production of bioplastics and valuable chemicals

Environmental Chemistry Letters - Global warming and plastic pollution result from the massive use of fossil fuels, calling for the development of sustainable bioplastics derived...     

Experimental investigation and optimization of dimple-roughened impinging jet solar air collector using a novel AHP-MABAC approach

Environmental Science and Pollution Research - The effect of the flow and geometric parameters of a dimple-roughened absorber plate on the enactment of solar air collectors (SACs) with air-impinged...     

Biocatalytic polymeric membranes to decrease biofilm fouling and remove organic contaminants in wastewater: a review

The presence of recalcitrant contaminants in wastewater is major challenge to decrease pollution and associated health issues. As a consequence, membrane technologies have recently attracted industrial attention, yet a major setback of membrane employment is membrane fouling which leads to frequent discarding of membrane modules. More than 45% of all membrane fouling cases are caused by biofilms that are resistant to antimicrobial agents. Here we review polymeric membranes with antifouling properties, with focus on surface properties, fabrication, characterization, biocatalysis using enzymes and application towards the removal of dyes, phenol, pesticides and fertilizers. Nano-engineered fabrication of polymeric membranes allow to decrease fouling by 80–90%. Immobilized oxidoreductases in polymeric membranes allow 65–98% removal contaminants in wastewater.

     

Anthropogenic nexus on organochlorine pesticide pollution: a case study with Tamiraparani river basin,South India

The levels of 17 organochlorine pesticides residues (OCPs) in surface water and sediments from Tamiraparani river basin, South India were investigated to evaluate their potential pollution and risk impacts. A total of 96 surface water and sediment samples at 12 sampling stations were collected along the river in four seasons during 2008–2009. The ΣOCP concentrations in surface water and sediments were in the range of 0.1 to 79.9 ng l⁻¹ and 0.12 to 3,938.7 ng g⁻¹ dry weight (dw), respectively. Among the OCPs, the levels of dichlorodiphenyltrichloroethanes (DDTs), aldrin, dieldrin, cis-chlordane, trans-chlordane, and mirex were dominant in the sediments. The dominant OCPs in water samples are heptachlor, o,p′-DDE, dieldrin, o,p′-DDD, and mirex, which show different source of contamination pattern among sampling seasons. The distribution pattern of DDTs, hexachlorocyclohexane, and other OCPs in the present study shows heterogenic nature of nonpoint source of pollution. Notable contamination of water and sediment sample that was observed in upstream (S2) 58 ng l⁻¹ and downstream (S11) 1,693 ng g⁻¹ dw explains agricultural and municipal outfalls, whereas frequent damming effect reduces the concentration level in the midstream. The overall spatial–temporal distribution pattern of ΣOCP residues are illustrated by GIS package.     

Contamination and bioaccumulation of benzotriazole ultraviolet stabilizers in fish from Manila Bay, the Philippines using an ultra-fast liquid chromatography-tandem mass spectrometry

Methyl methacrylate (MMA) is grafted on multiwalled carbon nanotubes (MWCNTs) by using N₂ plasma technique. The MMA grafted MWCNTs (MWCNT-g-pMMA) are characterized by using Raman spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, thermo gravimetric analysis-differential thermal analysis (TGA-DTA), and potentiometric acid-base titration method. The application of MWCNT-g-pMMA in the removal of 4,4′-dichlorinated biphenyl (4,4′-DCB) from large volumes of aqueous solutions is investigated under ambient conditions. The results indicate that the adsorption of 4,4′-DCB on MWCNT-g-pMMA is much higher than that of 4,4′-DCB on MWCNTs, and the adsorbed 4,4′-DCB is difficult to be thermally decomposed from MWCNT-g-pMMA according to the TGA-DTA analysis. MWCNT-g-pMMA are suitable materials in the preconcentration and immobilization of polychlorinated biphenyls (PCBs) from large volumes of aqueous solutions in environmental pollution cleanup.     

Distribution of PCBs, HCHs and DDTs, and their ecotoxicological implications in Bay of Bengal, India

Analyses of environmentally persistent pollutants like polychlorinated biphenyls (PCBs), hexachlorocyclohexane (HCH) isomers, and dichlorodiphenyltrichloroethane (DDT) and its metabolites in seawater and sediment samples collected from six locations along the east coast of India were carried out using High-Resolution Gas Chromatograph with High-Resolution Mass Spectrometer (HRGC-HRMS). Sediment and water from Chennai harbour and Cuddalore fishing harbour contained higher concentration of all the compounds. The highest concentration (6570 pg/g dry weight) of total PCB was found in sediment from Chennai harbour followed by sediments sampled in Chennai (opposite to Cooum River mouth) (505 pg/g), Cuddalore fishing harbour (335 pg/g) and Mandapam (251 pg/g). Concentrations in other locations were two orders of magnitude lower than Chennai harbour. A distinct PCB distribution pattern in sediment was observed between harbours and other locations. Greater concentrations of tetra-, penta- and hexachlorobiphenyls were observed in sediments of harbours and opposite to Cooum river mouth, but in other locations lower chlorinated biphenyls (di, tri and tetra-) were more. In seawater, HCH concentration was greater than DDT, but it was quite opposite in sediments. Elevated levels of DDT in sediment were observed only at highly populated urban locations, reflecting the local usage and input of this pesticide. Based on sediment/water quality criteria/guidelines, some coastal locations of the Bay of Bengal could be designated as being polluted by DDTs and gamma-HCH (lindane), but not by PCBs. This investigation reveals the declining trend on the environmental burden of persistent pesticides in Indian marine environment. Data on the organochlorine concentrations found in this survey can be used as reference levels for future POPs monitoring programme.     

Biodegradable Poly(butylene succinate) and Poly(butylene adipate-co-terephthalate) Blends: Reactive Extrusion and Performance Evaluation

Two biodegradable polyesters, poly(butylene adipate-co-terephthalate) (PBAT) and poly(butylene succinate) (PBS) were melt-compounded in a twin screw extruder to fabricate a novel PBS/PBAT blend. The compatibility of the blend was attributed to the transesterification reaction that was confirmed by Fourier transform infrared spectroscopy. The Gibbs free energy equation was applied to explain the miscibility of the resulting blend. Dynamic mechanical analysis of the blends exhibits an intermediate tanδ peak compared to the individual components which suggests that the blend achieved compatibility. One of the key findings is that the tensile strength of the optimized blend is higher than each of the blended partner. Rheological properties revealed a strong shear-thinning tendency of the blend by the addition of PBAT into PBS. The phase morphology of the blends was observed through scanning electron microscopy, which revealed that phase separation occurred in the blends. The spherulite growth in the blends was highly influenced by the crystallization temperature and composition. In addition, the presence of a dispersed amorphous phase was found to be a hindrance to the spherulite growth, which was confirmed by polarizing optical microscopy. Furthermore, the increased crystallization ability of PBAT in the blend systems gives the blend a balanced thermal resistance property.